from

$17.79

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$76.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.99

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.59

FI Throttle Body Mou

from

$12.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Ambient Air Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper reading of outside air temperature.
The Ambient Air Temperature Sensor measures outside air temperature and is used by the heating and cooling control system, along with other vehicle cabin sensors, to control temperature and blower speed.

from

$58.99

ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls vapor flow from canister to engine
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$51.99

The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.

Product Features:

Made to OE spec to ensure a proper fit, form and function.
Sensors are engineered for precision performance, durability and a long service life.
All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.

from

$29.99

ACDelco GM Original Equipment Vapor Canister Vent Solenoids are GM-recommended replacements for your vehicle’s original components. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. These original equipment vapor canister vent solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls fresh air flow to the canister
Sends fuel vapors to the engine for re-burn
Helps control fuel tank pressure
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$136.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$172.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$313.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$135.68

All Delphi Air Mass Sensors feature a patented dimpled flow management feature that provides better control of air separation for more consistent air flow across the sensing elements and enabling outstanding performance in application-specific ducting.

Product Features:

Platinum-coated ceramic heated sensing element design is smaller and less fragile than competitive products
Heated sensing elements are very robust to damage from dust impingement
Heated sensing elements offer proven durability with more that 130 million in the field over the past 16 years
Patented temperature compensation algorithm offers robustness to changes in ambient air temperature
Patented dimple design eliminates the need for a flow straightener in most applications
Probe design offers low restriction air measurement driving increased horsepower
Interchangeability is enabled by common mounting footprint

from

$99.98

The Delphi Wide Range Oxygen Sensor is an integral component in the engine management system, helping provide accurate engine control and system diagnostics. It measures the air-fuel ratio of exhaust gases over a wide lambda range. Its five-wire, two-cell design enables higher signal resolution with greater accuracy. An integrated heater and alumina-zirconia element facilitate a fast light-off, allowing earlier closed-loop operation compared to conventional conical oxygen sensors. Designed to accommodate a variety of fuel applications, the poison-resistant coating of the Delphi Wide Range Oxygen Sensor helps improve accuracy and durability in harsh exhaust environments, while minimizing deterioration of the sensor characteristics over time. Its uniquely designed planar element technology and integral heater enhance resistance to thermal shock and help the sensor achieve fast light-off to help manufacturers meet current and more stringent future emissions regulations. The sensor’s greater accuracy and a fast transient response time help provide greater engine control, and help improve fuel economy and drivability.

Product Features:

High signal resolution and low pressure sensitivity help provide precise engine control
Integral heater enables faster light-off for earlier closed-loop operation
Unique planar element design enhances thermal shock resistance
Fast response helps improve fuel economy

from

$44.57

The ACDelco GM Original Equipment Fuel Pressure Sensor is a GM-recommended replacement for your vehicle’s original component. The Fuel Pressure Sensor sends fuel pressure information to the powertrain control module, which uses the data to adjust fuel delivery parameters. This original equipment fuel pressure sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Undergo the same stringent testing process as the original part
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$22.89

The ACDelco GM Original Equipment Fuel Sender Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$105.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$60.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$81.99

GM Genuine Parts Vapor Canister Vent Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$446.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$34.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.79

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$74.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$94.99

ACDelco GM Original Equipment Fuel Injection Fuel Rail Pressure Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: Ignition, and/or Engine Fuel Management. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
In 08232019_LegalReviewCataloguingStatements
Manufactured to GM OE specification for fit, form, and function

from

$46.99

ACDelco GM Original Equipment Multi Purpose Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$35.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.