from

$10.49

OIL SENSOR O-RING

from

$738.56

There are two forms of charge air cooling: direct cooling with the ambient air, or indirect cooling via the coolant to the ambient air. Indirect charge air cooling offers benefits in terms of package size and dynamic response and will play an increasingly important role in the future. This involves placing the charge air cooler very close to the engine rather than in the front end of the vehicle. The additional low-temperature radiator needed for indirect charge air cooling is an integral part of the cooling module. Due to the smaller installation depth of the low-temperature radiator compared to a conventional charge air cooler, more space is available in the front end, which can then be used for various measures such as pedestrian protection. The location close to the engine permits the use of shorter charge air lines, cutting the pressure loss by around 50%. The higher density of the cooled charge air and lower pressure loss means there is more air available to the engine for combustion. The result: improved engine responsiveness.

Product Features:

Manufactured with the highest quality components to ensure product quality and durability
Built with high density multi-louvered fins for maximum cooling efficiency
All units are leak tested to ensure a damage-free unit at installation
OE design to ensure exact fit, form and function for an easy installation

from

$109.99

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Includes sensor (if applicable) and cap.
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life.
Resistant to cracking and wear from heat cycles preventing coolant loss.
Direct fitment allows easy installation.

from

$57.41

Oil Pan Bolt Set

from

$100.52

Camshaft Position Sensor

from

$667.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$3.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$35.65

Crankshaft Seal

from

$135.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$5.81

The Febi Oil FIller cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$4.00

Water Pump O-Ring

from

$28.57

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$19.37

Camshaft Follower

from

$116.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$36.86

Valve Stem Seal Kit

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro« gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro« engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro« engineers through rigorous research and development

from

$37.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds original equipment specifications.
Zero engine leakage for late model vehicles.

from

$132.02

Timing Chain

from

$22.29

Oil Cooler Seal

from

$11.37

Timing Guide Rail

from

$27.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$194.60

Boost Pressure Valve

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$69.99

Rein Turbo Oil Feed Pipes are manufactured with premium OE quality hose material designed to withstand the demands of automotive turbo cooling systems. Rein turbo oil feed pipes are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in turbo cooling systems.

Product Features:

Manufactured with premium hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both feed and return pipes together ensures optimal performance and safety levels.

from

$106.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 10-18;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2010-2018
Weight approx: 3 Lbs
HYDRAULIC
RUBBER BUMPER