2011 BMW 328i xDrive Drivetrains

Essential 2011 BMW 328i xDrive Drivetrains

Corteco – Trans Case Output Sh (Part No.J7121670615CFW)

Trans Case Output Sh

from

$17.00
Trans Case Output Sh

Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)

Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon

from

$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Febi – Wheel Hub (Part No.K7000271577FEB)

Wheel Hub

from

$152.56
FEBI manufactures OE quality wheel hub assemblies that provide superior performance and durability.

Product Features:
  • OE Quality
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
  • Precise engineered hub surface provide maximum load capacity and durability
See More

Original Equipment – Transfer Case Motor (Part No.J7100466696OEA)

Transfer Case Motor

from

$668.20
Transfer Case Motor

Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)

Differential Side Cover Seal, 90 x 44 x 10

from

$20.42
Differential Side Cover Seal, 90 x 44 x 10

National – Bearings (Part No.210-L)

Bearings

from

$64.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

GKN Drivetech – Axle Assembly, New (Part No.K4000436985GKN)

Axle Assembly, New

from

$893.78
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.

Product Features:
  • OEM Quality and a Direct fit Replacement
  • Provides exceptional reliability.
  • Improved space utilization through power unit and gearbox repackaging potential.
  • Lighter weight provides improved fuel efficiency.
  • Better driving characteristics and comfort
  • Optimum power delivery for peak vehicles
See More

Rein – CV Boot Kit (Part No.BKN0099R)

CV Boot Kit

from

$44.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.

Product Features:
  • Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
  • Comes with the OE grease
  • Boot manufactured with highest quality materials to prevent cracking, wear and leaking
  • Matches Original Equipment design specifications
See More

Corteco – Pinion Seal (Part No.J7010426125CFW)

Pinion Seal

from

$16.40
Pinion Seal

Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)

DIFFERENTIAL DRAIN P

from

$7.39
DIFFERENTIAL DRAIN P

Rein – Differential Plug (Part No.HWP0065)

Differential Plug

from

$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.

Product Features:
  • Designed to tight tolerances to ensure proper sealing.
  • Rein Oil Drain Plugs are coated for high corrosion resistance.
  • Designed and constructed to strict engineering quality standards.
  • Includes copper sealing gasket.
See More

Corteco – Input Shaft Seal (Part No.J1156254228CFW)

Input Shaft Seal

from

$20.29
Input Shaft Seal

Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)

Drive Shaft-Ctr Support Bearng

from

$13.99
Drive Shaft-Ctr Support Bearng

SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)

Drive Shaft Support Bearing

from

$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Pre-Lubricated and reinforced seals
  • Rubber support cushions are manufactured from durable rubber compounds
  • Support frames are constructed from high quality steel or aluminum
See More

Vaico – CV Joint Boot Kit (Part No.K6010187213VCO)

CV Joint Boot Kit

from

$29.90
With Clamps and Grease The Vaico CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Febi – CV Joint Boot Kit (Part No.K6010292557FEB)

CV Joint Boot Kit

from

$48.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Febi – Axle Shaft Nut (Part No.K4030133883FEB)

Axle Shaft Nut

from

$12.32
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Febi – Axle Shaft Nut (Part No.K4030118037FEB)

Axle Shaft Nut

from

$13.82
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Original Equipment – Transfer Case Flange (Part No.J7164686942OEA)

Transfer Case Flange

from

$313.12
Transfer Case Flange

Original Equipment – Transfer Case Flange (Part No.J7164686944OEA)

Transfer Case Flange

from

$305.73
Transfer Case Flange

Whiteline – Differential Mount Bushing (Part No.KDT919)

Differential Mount Bushing

from

$94.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Front Drive Shaft: Adjustable (Part No.938-277)

Front Drive Shaft: Adjustable

from

$1044.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: OE Fix (Part No.936-310)

Front Drive Shaft: OE Fix

from

$378.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Dorman – Rear Driveshaft Assembly (Part No.986-565)

Rear Driveshaft Assembly

from

$898.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.986-260)

Rear Drive Shaft

from

$955.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.986-264)

Rear Drive Shaft

from

$954.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

2011 BMW 328i xDrive Drivetrains

You count on your 2011 BMW 328i xDrive to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 48 Drivetrains ranging in price from $2.45 to $955.99, you’re sure to find everything you need for your 2011 BMW 328i xDrive.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Carquest Premium, and Dorman. 2011 BMW 328i xDrive Drivetrains start as low as $2.45!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 914 extensive product reviews on 2011 BMW 328i xDrive Drivetrains.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2011 BMW 328i xDrive below to get started!

Top-Rated Drivetrains Brands For Your 2011 BMW 328i xDrive

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 BMW 328i xDrive running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Dorman, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2011 BMW 328i xDrive back on the road. Some of the top-rated Valvoline products in these categories are:

FAQs for 2011 BMW 328i xDrive Drivetrains

What are the most purchased Drivetrains for the 2011 BMW 328i xDrive?

Out of 48 Drivetrains for the 2011 BMW 328i xDrive, the most popular in our inventory are:
CV Axle Shaft Assembly
from $102.99
(2)
CV Axle Shaft Assembly
Drive Shaft and Axles
CV Axle Shaft Assembly
from $99.99
(1)
CV Axle Shaft Assembly
Drive Shaft and Axles
Front Drive Shaft: OE Fix
from $378.99
This product is not rated
Front Drive Shaft: OE Fix
Drive and Prop Shaft Assemblies