2011 BMW 128i Fuel and Emissions Systems
More 2011 BMW 128i Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2011 BMW 128i, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2011 BMW 128i Fuel and Emissions Systems
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1098)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 60.43" Long, Heated, Exact Fit (Part No.234-5139)
from
$160.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Elring – Brake Vacuum Pump Ga (Part No.N4051432794ELR)
from
$8.25
Brake Vacuum Pump Ga
Rein – Air Injection Pump H (Part No.B7042669697RIN)
from
$47.66
Air Injection Pump H
Vemo – Relay (Part No.P2020309952VMO)
from
$26.12
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – Automotive Engine Crankcase Breather Hose (Part No.B2010338005RIN)
from
$61.42
This OE quality breather hose is vehicle specific and a direct replacement for the original component. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.
Product Features:
See More
Product Features:
- Original Equipment fit, form and function
- Manufactured from premium raw materials
- Premium OE design
- Right fit the first time
- For European vehicles
aFe POWER – Sprint Booster (Part No.77-16302)
from
$297.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Product Features:
See More
Product Features:
- Reduces Throttle Response Time
- Improves Acceleration
- Easy To Install
- Does Not Affect The Vehicles Electronic System
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1396)
from
$106.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Evaporative Emissions Canister Vent Valve (Part No.994-019)
from
$129.99
A malfunctioning vapor canister vent can cause the engine light to come on. This replacement valve is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister vent valve fits and functions like the original part
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment function at a lower price
- Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
Carquest Premium – Vapor Canister (Part No.CPN2235)
from
$398.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Elring – Fuel Injector Seal (Part No.C1010250108ELR)
from
$4.88
Fuel Injector Seal
Continental – Fuel Pump Module Assembly (Part No.228235018007Z)
from
$222.99
Continental fuel modules are a genuine OEM part. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel modules are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being a genuine OEM part while still maintaining a competitive price.
See More
APA/URO Parts – Vapor Canister Gromm (Part No.B7085566156APA)
from
$6.81
Vapor Canister Gromm
Dorman – Mechanical Vacuum Pump (Part No.904-828)
from
$533.99
This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.
Product Features:
See More
Product Features:
- Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
- Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)
from
$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Bosch – Bosch Oxygen Sensor (Part No.C5010334297BOS)
from
$226.09
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
APA/URO Parts – Fuel Sender Seal (Part No.E2050269527APA)
from
$21.09
Fuel Sender Seal
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
APA/URO Parts – Intake Manifold Actu (Part No.B1205466803APA)
from
$332.79
Intake Manifold Actu
Elring – FI Throttle Body Mou (Part No.C7001377381ELR)
from
$13.49
FI Throttle Body Mou
Pierburg – Secondary Air Injection Check Valve (Part No.B6050380208APG)
from
$157.96
The Pierburg Air Pump Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDC1019)
from
$267.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Delphi – Mass Air Flow Sensor (Part No.AF10381)
from
$151.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
APA/URO Parts – Intake Manifold Actu (Part No.B1205466802APA)
from
$285.15
Intake Manifold Actu
Carquest – Fuel Injector (Part No.67330)
from
$145.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
- Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
Rein – Cap-Fuel (Part No.CPF0031)
Rein – OE Quality Automotive Fuel Tank Cap (Part No.E2010379639RIN)
from
$40.83
This is an OE quality fuel cap. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.
Product Features:
See More
Product Features:
- Original Equipment fit, form and function
- Manufactured from high quality materials
- Right fit the first time
- O ring is black in color
- For European vehicles
Popular 2011 BMW 128i Fuel and Emissions Systems Categories
2011 BMW 128i Fuel and Emissions Systems
You count on your 2011 BMW 128i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 63 Fuel and Emissions Systems ranging in price from $2.39 to $621.99, you’re sure to find everything you need for your 2011 BMW 128i.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 19 different brands like Bosch, Carquest Premium, and Delphi. 2011 BMW 128i Fuel and Emissions Systems start as low as $2.39!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 370 extensive product reviews on 2011 BMW 128i Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Cap-Fuel with 4.5 stars and Mass Air Flow Sensor with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2011 BMW 128i below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2011 BMW 128i
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 BMW 128i running right for years to come. In our inventory you’ll find brands like Bosch, Carquest Premium, Delphi, and even more.
Popular Carquest Fuel and Emissions Systems
You’ll find popular Carquest brand products across Fuel Injectors. All are waiting to get your 2011 BMW 128i back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
If Bosch are what you’re looking for, our inventory holds plenty. We stock Bosch brand Fuel and Emissions Systems for your 2011 BMW 128i, and some of our most reviewed Bosch parts include:
FAQs for 2011 BMW 128i Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2011 BMW 128i?
Out of 63 Fuel and Emissions Systems for the 2011 BMW 128i, the most popular in our inventory are:
What are the top-rated 2011 BMW 128i Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2011 BMW 128i based on customer reviews/ratings are:
from
$34.99
(2)
Cap-Fuel
“For 2002 bmw 325i this gas cap is excellent quality and comes with the strap to hang it on fuel door excellent loved it”
