2011 Audi Q5 Engine Cooling Parts

Essential 2011 Audi Q5 Engine Cooling Parts

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0153)

Engine Coolant Temperature Sensor

from

$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Radiator Cap Tester Adapter

from

$75.99
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Felpro – Engine Coolant Outlet Gasket (Part No.36130)

Engine Coolant Outlet Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Elring – Water Pump O-Ring (Part No.G3059279771ELR)

Water Pump O-Ring

from

$4.11
Water Pump O-Ring

Rein – Expansion Tank (Part No.EPT0155)

Expansion Tank

from

$42.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-5866)

Coolant Housing/Water Outlet: With Housing

from

$58.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

KAI – Rad/Condenser Fan Assembly (Part No.AU3115113)

Rad/Condenser Fan Assembly

from

$222.99
New Platinum Pro Radiator And Condenser Fan Assembly, 2.0/3.2 Liter V6 Models, Module Not Included

Product Features:
  • 2.0/3.2 Liter V6 Models, Module Not Included, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Geba – Geba Water Pump (Part No.G3000657148GEB)

Geba Water Pump

from

$122.16
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

Dorman – Engine Water Pump Assembly (Part No.902-670)

Engine Water Pump Assembly

from

$300.99
The gasket on certain Audi and VW OEM engine water pump housings swells when it comes in contact with oil, causing the plastic housing to crack. This Dorman OE FIX housing has been upgraded to aluminum to prevent cracking. In addition, the gasket material has been upgraded to reduce swelling when it comes in contact with oil for a longer service life. This housing is designed to match the fit and function of the original housing on specified applications, and is engineered for reliable performance and durability..

Product Features:
  • Improved design – this engine water pump housing has upgraded gasket material to reduce swelling when it comes in contact with oil for a longer service life.
  • Direct replacement – this engine water pump housing is designed to match the fit and function of the original housing on specific Audi and VW vehicles
  • Restores functionality – maintains the proper engine temperature, protecting the engine from damage caused by overheating
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Febi – C Clip Retainer (Part No.G2050309483FEB)

C Clip Retainer

from

$3.88
C Clip Retainer

Motorad – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.506-192)

Integrated Thermostat Housing: With Seal, 192 Degrees

from

$77.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Auxiliary Coolant Pump (Part No.902-081)

Auxiliary Coolant Pump

from

$192.99
This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
  • Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Rein – Coolant Pipe (Part No.CHP0792)

Coolant Pipe

from

$119.99
Rein Automotive OE quality coolant pipes fit European vehicles the way the original manufacturer intended. Designed to be a direct replacements for the OE coolant, Rein coolant pipes are identical to the OEM.

Product Features:
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Made to strict engineering quality standards.
  • Part is produced using only the highest quality materials.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Nissens – Nissens Radiator (Part No.G1000657067NSS)

Nissens Radiator

from

$407.16
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
  • Compact and lightweight.
See More

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Cooling Hose Flange Plug

from

$0.86
Cooling Hose Flange Plug

Victor Reinz – Engine Coolant Pipe O-Ring (Part No.41-10479-00)

Engine Coolant Pipe O-Ring

from

$5.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Dayco – Timing Water Pump Kit; With Belt And Pump, 2 Piece Set (Part No.WP348K1A)

Timing Water Pump Kit; With Belt And Pump, 2 Piece Set

from

$274.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and tough, wear-resistant belt
See More

Beck/Arnley – Water Pump Gasket (Part No.039-4172)

Water Pump Gasket

from

$16.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Metal where applicable
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-839)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$259.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Victor Reinz – Engine Coolant Thermostat Seal (Part No.41-76367-00)

Engine Coolant Thermostat Seal

from

$3.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35924)

Engine Coolant Thermostat Housing Seal

from

$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Rein – Thermostat (Part No.G4000319286RIN)

Thermostat

from

$108.62
The Rein Thermostat is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Rein – Thermostat Insert 95C (Part No.CTN0046)

Thermostat Insert 95C

from

$46.99
Rein Automotive OE quality thermostat inserts install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These inserts are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat inserts aim to provide the profession repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component.

Product Features:
  • Matches original equipment design specifications.
  • All gaskets or seals necessary for installation are supplied with thermostats.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Thermostat set to 95 degrees Celsius to maintain optimal running temperature.
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54019)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$20.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Engine Coolant Reservoir Cap

from

$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

2011 Audi Q5 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2011 Audi Q5. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 75 different Engine Cooling Parts in our inventory ranging from $0.86 to $433.99. That means you can find the exact parts or products you need to keep that 2011 Audi Q5 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 26 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Audi Q5. Permatex, Carquest, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2011 Audi Q5, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,212 reviews in this category, some of the top rated parts include Radiator Fan Assembly: Dual, Cost Effective & Reliable with 5.0 stars and Water Pump with 5.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2011 Audi Q5 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2011 Audi Q5 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Audi Q5 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Q5 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Carquest Premium Engine Cooling Parts

We carry Carquest Premium parts in our stock across Coolant Reservoir Caps categories, plus more. For a 2011 Audi Q5, our most popular Carquest Premium Engine Cooling Parts include:
Engine Coolant Reservoir Cap
from $11.99
(3)
Engine Coolant Reservoir Cap
Coolant Reservoir Caps

FAQs for 2011 Audi Q5 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2011 Audi Q5?

Out of 75 Engine Cooling Parts for the 2011 Audi Q5, the most popular in our inventory are:
Engine Coolant Temperature Sensor
from $20.99
(3)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors
Integrated Thermostat Housing: With Seal, 192 Degrees
from $77.99
This product is not rated
Integrated Thermostat Housing: With Seal, 192 Degrees
Thermostat and Water Outlet Assemblies
Engine Coolant Temperature Sensor
from $29.99
This product is not rated
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

What are the top-rated 2011 Audi Q5 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2011 Audi Q5 based on customer reviews/ratings are:
Radiator Fan Assembly: Dual, Cost Effective & Reliable
from $259.99
(1)
Radiator Fan Assembly: Dual, Cost Effective & Reliable
“The motors are more big than oem but the oder is the sane”
Water Pump
from $96.59
(1)
Water Pump
“Went on great perfect fit”
Standard Thermostat: With Seal, 203 Degrees
from $79.99
(1)
Standard Thermostat: With Seal, 203 Degrees
“Bought for an 2014 Audi/vw 2.0t and it doesn’t fit in the housing. It is to tall.”