from

$472.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Toyota Tacoma and T100 rear without factory locking differential
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.

from

$15.99

Toyota 07 & up Tundra rear 10.5″ outer pinion slinger w/ 5.7L .

Product Features:

Outer slinger
Fits 10.5″ Toyota Tundra

from

$823.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:

Pre-Pressed Rear Axle
Pre-Pressed Rear Axle
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
Easier installation – this pre-pressed axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components

from

$63.99

07 and up Tundra 9.5″ rear pinion seal W/ 4.0L & 4.7L.Yukon Mighty seal.

Product Features:

Pinion seal
Fits 9.5″ Toyota Tundra rear

from

$12.99

07 and up Tundra rear 9.5″ pinion gear Thrust washer W/4.0L & 4.7L.

Product Features:

Pinion gear thrust washer
Fits 9.5″ Toyota Tundra

from

$24.99

Product Features:

Pinion gear thrust washer
Fits Toyota Tacoma and T100

from

$21.99

Product Features:

KIT SHIM SIDE 9.5″ GM

from

$8.40

Axle Seal

from

$18.16

Differential Seal

from

$15.99

Toyota T100 & Tacoma pinion nut.

Product Features:

Pinion nut
Fits Toyota Tacoma and T100 without factory locking differential

from

$21.99

07 and up Tundra front pinion nut.

Product Features:

Pinion nut
Fits 2007 and up Toyota Tundra front

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$15.99

Product Features:

Carrier shim kit for Dana Spicer 30 with 30 spline axles

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$13.79

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

from

$629.99

USA Standard Master Overhaul kit for Toyota 10.5″ rear

Product Features:

Rear
Toyota 10.5″

from

$612.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Toyota Tacoma and T100 rear with factory locking differential
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.

from

$6.99

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
5 needed

from

$7.99

07 and up Tundra rear 9.5″ ring gear bolts W/ 4.0L & 4.7L.

Product Features:

Ring gear bolt
Fits 9.5″ Toyota Tundra

from

$56.99

07 and up Tundra rear 9.5″ crush sleeve W/ 4.0L & 4.7L.

Product Features:

Crush sleeve
Fits 9.5″ Toyota Tundra

from

$16.99

Toyota 7.5″ crush sleeve, 2.185″ long.

Product Features:

Crush sleeve for Toyota 7.5″
2.185″ tall

from

$495.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Toyota T100 & Tacoma rear without factory locking differential
8.125″ ring gear diameter
30 spline pinion
12 ring gear bolts
4.88 ratio

from

$355.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

from

$313.99

This differential lock actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Ideal replacement – this differential lock actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative differential lock caused by failed original actuator
Cost-effective solution – offers original equipment fit and function at a competitive price
Trustworthy quality – backed by a team of designers and engineers in the United States

from

$73.99

Product Features:

Cross pin shaft
Fits Toyota Tacoma and T100

from

$179.99

07 and up Tundra rear 10.5″ cross pin shaft W/5.7L.

Product Features:

Cross pin shaft
Fits 10.5″ Toyota Tundra

2010 Toyota Tundra Differentials

More 2010 Toyota Tundra Differentials

Essential 2010 Toyota Tundra Differentials

Yukon Gear – Bearing Install Kit For Toyota T100 And Tacoma Differential (Part No.11085)

Yukon Gear – Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L (Part No.33024)

Dorman – Pre-Pressed Rear Axle (Part No.926-144)

Yukon Gear – 07 And Up Tundra 9.5" Rear Pinion Seal (Part No.30340)

Yukon Gear – 07 And Up Tundra Rear 9.5" Pinion Gear Thrust Washer With 4.0L & 4.7L (Part No.33398)

Yukon Gear – T100 & Tacoma Standard Pinion Gear Thrust Washer (Part No.33396)

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Corteco – Axle Seal (Part No.K4021473844CFW)

NOK – Differential Seal (Part No.J7040163835NOK)

Yukon Gear – Toyota T100 & Tacoma Pinion Nut (Part No.33160)

Yukon Gear – 07 And Up Tundra Front Pinion Nut (Part No.33159)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)

USA Standard Gear – Rear Master Overhaul Kit for Toyota 10.5" (Part No.37120)

USA Standard Gear – Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker (Part No.37112)

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Yukon Gear – 07 And Up Tundra Rear 9.5" Ring Gear Bolts With 4.0L & 4.7L (Part No.33064)

Yukon Gear – 07 And Up Tundra Rear 9.5" Crush Sleeve With 4.0L & 4.7L (Part No.33353)

Yukon Gear – Toyota 7.5" Crush Sleeve (Part No.33115)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota Tacoma And T100 In A 4.88 Ratio (Part No.24538)

USA Standard Gear – Ring & Pinion Gear Set For Toyota V6 In A 4.56 Ratio, 29 Spline Pinion (Part No.36317)

Dorman – Front Differential Actuator (Part No.600-420)

Yukon Gear – T100 & Tacoma Standard Cross Pin Shaft (Part No.33417)

Yukon Gear – 07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L (Part No.33415)

Popular 2010 Toyota Tundra Differentials Categories

2010 Toyota Tundra Differentials

Differentials Brands To Make Your 2010 Toyota Tundra Last

Popular Idemitsu Differentials

FAQs for 2010 Toyota Tundra Differentials

What are the most purchased Differentials for the 2010 Toyota Tundra?

More Popular Parts for All Makes