2010 Toyota 4Runner Suspension Parts

SuspAirBag/Bellows

Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:

• Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
• Durable construction – made of hardened steel to match the function and durability of the original part
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life

Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.

Product Features:

• Maximum Performance Upgrade With Up To 40% More Damping Performance Than Standard Shock Absorbers
• Perfect Solution When You Need To Upgrade Suspension Performance On Your Toyota Truck
• Truck Monotube Design Outperforms All Other Standard Shock Absorbers
• Zinc-Coated, Stainless Steel Piston Ring Provides A Positive Seal In The Most Extreme Conditions
• Rubber Boot To Protect The Shaft And Keep Dirt And Debris Away From The Seals
• Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)

Quick Strut Kit

These Rear Coil Springs provide 1″-2″ of lift. This kit is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• Direct Fit Installation, Requires No Modifications
• 1″-2″ Lift

Level out the front of your Toyota® Tacoma truck or 4Runner SUV by 2.25-in. with the LEVEL IT system from Rancho®. This leveling system features sway bar spacers and Rancho RS9000®XL struts for superior on-road comfort and off-road performance.

Product Features:

• COMPATIBILITY — Designed for Toyota Tacoma trucks and 4Runner SUVs
• LEVELED STANCE — Reduces factory rake and levels out truck’s stance by 2.25-in. (aftermarket bumpers, winches, etc. affect lift height)
• COMPLETE SOLUTION — Kit includes two sway bar spacers, two Rancho RS9000®XL struts (coil springs not included) and mounting hardware to accommodate tires up to 33-in. (must use OE springs and top mounting components)
• DELIVERS SUPERIOR PERFORMANCE — Rancho RS9000®XL struts with nine-position damping control for superior on-road comfort and off-road performance
• ENHANCED CONTROL — Sway bar spacers correct end link angles for roll and sway control
• EASY TO INSTALL — Bolt-on installation for an easy upgrade
• COMPLETE PERFORMANCE UPGRADE FOR TACOMA– Transform your suspension with Rancho RS9000®XL rear shocks (RS999319), performance upper control arms (RS64901) and rear block kit (RS70901), all sold separately
• COMPLETE PERFORMANCE UPGRADE FOR 4RUNNER — Transform your suspension with Rancho RS9000®XL rear shocks (RS999305), performance upper control arms (RS64903) and rear block kit (RS70080), all sold separately
• NOTES — Allows the use of OE wheels/tires, must use OE springs and top mounting components, trimming required for 33-in. wheel/tire (tire size varies between manufacturers)

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

• QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
• RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
• VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
• OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
• MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
• MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
• IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
• RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
• ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Meets or exceeds OE requirements
• Helps restore steering and handling

NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

• 150 PSI Pressurized Nitrogen Gas
• Multi Stage Velocity Sensitive Valving
• Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
• Bonded Iron Piston For Durability And Longer Shock Life
• Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
• Orifice Disk For Axle Control In Any Condition
• Red Polyurethane Bushings

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

The CTR Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.

Belltech has developed the solution to correct the lackluster handling and performance of today factory strut equipped trucks and Suv, utilizing the next generation valving technology of our new Trail Performance Shock line. In true Belltech style, combining our new leveling strut spacers with both front and rear Trail Performance shock absorbers you receive a complete solution to level your stance and rejuvenate those worn out OEM shocks and struts.

Product Features:

• Safe/Economical Solution
• Direct Bolt-In, No Additional Modifications
• Allows For Installation Of Larger More Aggressive Wheel/Tire Combo
• Easy To Install

ShkAbsrbrAssyKt

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications

Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and U-bolts to provide complete front and rear kits.

Product Features:

• Increase Vehicle Height/Enhances Performance
• No Metal-On-Metal Contact As With Other Leveling Kits
• Comes With Front Strut Spacers, Greaseable Shackles, Sway Bar Bushings, Bump Stops, Shock Boots
• Comfort Ride Suspension System
• Top-Mount Easy-Install Design – No Special Tools Required For Installation

PassiveSuspConvKt

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2003-2020 Toyota 4Runner and 10-14 FJ Cruiser. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Direct Fit Installation
• Coil Springs Included for an Additional 1-2″ of Lift
• 2 Year Limited Warranty

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to meet or exceed OE requirements
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

SuspAirBag/Bellows

Shock Kit

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.