2010 Subaru Impreza Ignition Boots
More 2010 Subaru Impreza Ignition Boots
Find your specific 2010 Subaru Impreza original or aftermarket Ignition Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2010 Subaru Impreza Ignition Boots
NGK – Spark Plug Wire Set (Part No.8772)
from
$132.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4267)
from
$34.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
DENSO – Spark Plug Wire Set: Carbon Core, 4 Wire Set (Part No.671-4305)
from
$94.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – Ignition Wire Set (Part No.F1020268445NGK)
from
$70.01
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
NGK – Spark Plug Wire Set (Part No.8004)
from
$89.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – Spark Plug Wire Set (Part No.9237)
from
$70.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – Ignition Wire Set (Part No.F1020336114NGK)
from
$95.37
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Prenco – Prenco Direct Ignition Coil Boot (Part No.F3006376169PRN)
from
$18.52
Prenco Coil on Plug Boots provide the best protection possible for your ignition system versus the harsh environment created by the modem day engine. Prenco Coil on Plug Boots are constructed using the finest quality materials and compounds, and produced with superior quality tooling that exactly matches the Original Equipment Boot.
Product Features:
See More
Product Features:
- Prenco Coil on Plug Boots are produced using precise computer designed tooling and premium quality materials/compounds that are formulated to perform in extreme temperatures.
- Prenco Coil on Plug Boots are designed as a direct replacement for the OE Boot. Springs, grommets and ferrite resistors are provided for all applications where applicable.
- Inspect and replace Coil on Plug Boots every 50,000 miles and/or with every spark plug change to ensure optimum engine efficiency and performance.
- Replacing Coil and Plug Boots at regular intervals will prevent/correct misfires and will help to minimize further costly damage to Ignition Coils, Sensors, Catalytic Convertors, and ECUs.
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7084)
from
$11.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
NGK – Ignition Wire Set (Part No.F1020309079NGK)
from
$80.27
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Popular 2010 Subaru Impreza Ignition Boots Categories
2010 Subaru Impreza Ignition Boots
Maybe you’re in the middle of a full rebuild of that 2010 Subaru Impreza. Maybe you just need a couple of Ignition Boots. Either way, Advance Auto Parts has 1 different Ignition Boots in our inventory priced around $94.99. That means you can find the exact parts or products you need to keep that 2010 Subaru Impreza running smoothly.
Ignition Boots are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Subaru Impreza. DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Boots for your 2010 Subaru Impreza, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Boots to keep your 2010 Subaru Impreza rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Boots Brands To Make Your 2010 Subaru Impreza Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Subaru Impreza demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Impreza the best it can be. Be sure to browse some of our top Ignition Boots brands and parts.
