2010 Mercedes-Benz CLS63 AMG Brake Parts

Essential 2010 Mercedes-Benz CLS63 AMG Brake Parts

Carquest Wearever – BRAKE HOSE (Part No.BHA620063)

BRAKE HOSE

from

$33.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – BRK HOSE 1 EA TRUTQ (Part No.BHA621182)

BRK HOSE 1 EA TRUTQ

from

$34.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-8013)

Vacuum Brake Booster: Without Master Cylinder

from

$191.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-6216)

Vacuum Brake Booster: Without Master Cylinder

from

$450.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Textar – Brake Pad Sensor (Part No.N10301451168TEX)

Brake Pad Sensor

from

$36.55
Brake Pad Sensor

Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK569)

Disc Brake Pad Electronic Wear Sensor

from

$12.39
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:
  • PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
  • Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
  • All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
  • Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
  • As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
See More

Febi – Bilstein Brake Disc Set Screw (Part No.N1004140486FEB)

Bilstein Brake Disc Set Screw

from

$2.98
The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Brembo – OE Replacement Brake Disc (Rotor) (Part No.N1000234081BRE)

OE Replacement Brake Disc (Rotor)

from

$865.75
The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Made of special cast iron with high carbon content
  • Pillar Venting Technology (Vented Rotors Only)
  • Easy Check wear indicator system
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
See More

Brembo – OE Replacement Brake Disc (Rotor) (Part No.N1000265847BRE)

OE Replacement Brake Disc (Rotor)

from

$675.26
The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Made of special cast iron with high carbon content
  • Pillar Venting Technology (Vented Rotors Only)
  • Easy Check wear indicator system
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
See More

Carquest Wearever – Parking Brake Shoes (Part No.S874)

Parking Brake Shoes

from

$39.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Parking Brake Shoes (Part No.S969)

Parking Brake Shoes

from

$32.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

TRW – TRW Brake Master Cylinder (Part No.N3000294309TRW)

TRW Brake Master Cylinder

from

$257.77
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:
  • Low volume uptake
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

Wearever – Master Cylinder (Part No.11-3770)

Master Cylinder

from

$136.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Parking Brake Hardware Kit (Part No.17442)

Parking Brake Hardware Kit

from

$46.99
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:
  • Contains all the necessary hardware for easy installation
  • Direct replacement for a perfect fit, form and function
  • Corrosion resistant for long-lasting durability against harsh roads
  • Manufactured with quality materials to restrain high tolerances
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2298)

Multi-Purpose Wire Connector with Leads

from

$37.99
ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)

Engine Camshaft Position Sensor Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Elring – Oil Drain Plug Gasket (Part No.A612044453ELR)

Oil Drain Plug Gasket

from

$1.21
Oil Drain Plug Gasket

Carquest Premium Gold – Ceramic Brake Pads – Rear (4-Pad Set) (Part No.GNAD1292)

Ceramic Brake Pads - Rear (4-Pad Set)

from

$51.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – Rear (4-Pad Set) (Part No.GMKD1531)

Semi-Metallic Brake Pads - Rear (4-Pad Set)

from

$36.49
Carquest Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-1373)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$48.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Carquest Premium Gold – Brake Pad Set – Gold Semi-Metallic (Part No.GMKD1373)

Brake Pad Set - Gold Semi-Metallic

from

$69.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Premium Gold – Ceramic Brake Pads – (4-Pad Set) (Part No.GNAD1450)

Ceramic Brake Pads - (4-Pad Set)

from

$67.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

TRW – Premium OE Formulated Brake Pads (Part No.N1010944871TRW)

Premium OE Formulated Brake Pads

from

$140.42
The TRW Premium brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-1291)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$61.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – Front (4-Pad Set) (Part No.GMKD1530)

Semi-Metallic Brake Pads - Front (4-Pad Set)

from

$49.99
Carquest Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Premium Gold – Ceramic Brake Pads – Front (4-Pad Set) (Part No.GNAD1291)

Ceramic Brake Pads - Front (4-Pad Set)

from

$55.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD1530)

Brake Pads: Reliable and Dependable Stopping

from

$44.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

2010 Mercedes-Benz CLS63 AMG Brake Parts

You count on your 2010 Mercedes-Benz CLS63 AMG to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 23 Brake Parts ranging in price from $1.21 to $865.75, you’re sure to find everything you need for your 2010 Mercedes-Benz CLS63 AMG.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 12 different brands like Cardone, Carquest, and Carquest Premium. 2010 Mercedes-Benz CLS63 AMG Brake Parts start as low as $1.21!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 13 extensive product reviews on 2010 Mercedes-Benz CLS63 AMG Brake Parts. Some of the top-rated Brake Parts products we carry are Oil Drain Plug Gasket with 1.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2010 Mercedes-Benz CLS63 AMG below to get started!

Top-Rated Brake Parts Brands For Your 2010 Mercedes-Benz CLS63 AMG

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Mercedes-Benz CLS63 AMG running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Carquest Premium, and even more.

Popular Carquest Wearever Brake Parts

You’ll find popular Carquest Wearever brand products across Brake Pads and Shoes. All are waiting to get your 2010 Mercedes-Benz CLS63 AMG back on the road. Some of the top-rated Carquest Wearever products in these categories are:
Brake Pad Wear Sensor
from $24.99
(1)
Brake Pad Wear Sensor
Brake Wear Sensors

Top-Rated Brake Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Brake Parts for your 2010 Mercedes-Benz CLS63 AMG, and some of our most reviewed parts include:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 2010 Mercedes-Benz CLS63 AMG Brake Parts

What are the most purchased Brake Parts for the 2010 Mercedes-Benz CLS63 AMG?

Out of 23 Brake Parts for the 2010 Mercedes-Benz CLS63 AMG, the most popular in our inventory are:
Ceramic Brake Pads - Front (4-Pad Set)
from $55.99
This product is not rated
Ceramic Brake Pads – Front (4-Pad Set)
Front Brake Pads and Shoes
Parking Brake Hardware Kit
from $46.99
This product is not rated
Parking Brake Hardware Kit
Brake Hardware Kits
Engine Camshaft Position Sensor Connector
from $40.99
This product is not rated
Engine Camshaft Position Sensor Connector
ABS Harness Connectors

What are the top-rated 2010 Mercedes-Benz CLS63 AMG Brake Parts?

Top-rated Brake Parts for your 2010 Mercedes-Benz CLS63 AMG based on customer reviews/ratings are:
Oil Drain Plug Gasket
from $1.21
(2)
Oil Drain Plug Gasket
“Doesn’t fit Mercedes GL 450 X164”