2010 Mazda CX-7 Steering and Chassis Parts

Name: Remanufactured Power Steering Pump
Brand: Cardone
SKU: 21-5497
Price: 253.99 USD
Rating: 1.0 (2 reviews)

Below you will find various in-demand Mazda Steering and Chassis Parts, components and accessories for your 2010 CX-7. Advance Auto Parts has popular CX-7 parts like Steering Knuckles, Tie Rods, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other CX-7 model years including 2007, 2008, 2009, 2011, 2012 and more. Select a category of 2010 Mazda CX-7 Steering and Chassis Parts below and start saving instantly.

Popular 2010 Mazda CX-7 Steering and Chassis Parts Categories

Power Steering Coolers

Rack & Pinions

Lower Ball Joints

Power Steering Pumps

Steering Knuckle Kits

Sway Bar Link Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Front Alignment Kits

Power Steering Pressure Hoses

Camber Kits

Steering Knuckles

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Sway Bar Bushings

Toe Links

Essential Steering and Chassis Parts for 2010 Mazda CX-7s

from

$253.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$258.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$191.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$28.99

All Steering Power Filter

from

$22.79

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$28.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Provides adjustment for camber and caster changes
Easy to install
Construction and design validated by MOOG engineers
Provides improved steering and handling feel
Long-lasting performance
Broad coverage for foreign and domestic applications

from

$43.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$479.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$557.99

AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.

Product Features:

Manufactured Again Certified quality process
Each unit is 100% hydraulically tested for pressure and flow.
Racks are remanufactured with OE grade, high temperature seals and O-rings for increased durability and performance.

from

$37.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$21.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$70.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$39.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$409.99

Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.

Product Features:

Pre-pressed assembly – this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
Saves hours – eliminates the possibility of extended time spent wrestling with individual corroded components
Simpler solution – no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
Quality engineering – designed in the United States and backed by a century of automotive aftermarket experience
Time saver – eliminates frustrating, unpredictable work required to replace individual corroded components

from

$20.49

Driveworks Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. Driveworks Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Chassis parts have been engineered and manufactured under the proven quality systems. Driveworks Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

from

$49.99

CAM BOLT KIT

from

$183.99

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose and line assembly
SAE J188 compliant high pressure rubber compound hose with internal noise absorber
SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$187.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas

from

$69.99

Whiteline adjustable camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.

Product Features:

Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$35.49

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$23.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Zinc coated tubes protect against rust and corrosion

from

$57.99

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$81.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$73.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$73.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$49.99

Tie Rod End

from

$76.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

Upgrade your 2010 Mazda CX-7 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2010 Mazda CX-7, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Steering and Chassis Parts are key to keeping your CX-7 functioning at its best. At Advance Auto Parts, we offer a wide selection of 54 Steering and Chassis Parts for the 2010 Mazda CX-7, designed to meet your needs without breaking the bank. From Steering Knuckle replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2010 Mazda CX-7 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $7.99 to $479.99, with an average price of $96.39. Our 54 Steering and Chassis Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2010 Mazda CX-7 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Mazda CX-7, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, DriveWorks, Imperial, and more. Moog Steering and Chassis Parts start at just $51.99 and boast an impressive 4.5 stars average rating from customers. DriveWorks and Imperial also bring quality to the table, with Steering and Chassis Parts available starting at $11.99, and at an average 4.3 stars rating. With 2,432 customer reviews and counting, our 2010 Mazda CX-7 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Mazda CX-7 is always ready to roll. We’re committed to providing you with everything you need to keep your CX-7 in top shape, all in one place. Start shopping confidently below for your 2010 Mazda CX-7!

Best-Selling Steering Knuckles for 2010 Mazda CX-7s

Enhance the driving experience in your Mazda with 3 quality Steering Knuckle components, starting at $258.99.

show more show less

from

$409.99

Pre-pressed assembly – this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
Saves hours – eliminates the possibility of extended time spent wrestling with individual corroded components
Simpler solution – no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
Quality engineering – designed in the United States and backed by a century of automotive aftermarket experience
Time saver – eliminates frustrating, unpredictable work required to replace individual corroded components

from

$258.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$258.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

Top Picks for 2010 Mazda CX-7 Sway Bars

Upgrade Mazda CX-7s with top-quality Sway Bars parts, including 12 OEM and aftermarket selections for your 2010 model.

show more show less

from

$51.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$51.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$26.99

SWAY BAR LINK KIT 1 EA DRIVE

from

$26.99

SWAY BAR LINK KIT 1 EA DRIVE

from

$15.79

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$39.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$39.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$21.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$83.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$70.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$37.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$22.79

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

In-Demand Power Steering Parts for 2010 Mazda CX-7s

Select from 19 premium Power Steering Parts parts for your 2010 Mazda CX-7, with prices ranging from $7.99 to $479.99.

show more show less

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$253.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$479.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$187.99

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas

from

$405.99

Edelmann Elite power steering pumps represent a step up in quality and performance over typical aftermarket brand power steering pumps and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each pump is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every pump has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Includes necessary hardware where applicable (o-ring, washers, etc…)
Pre-installed pulley and reservoir for ease and time saving install
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$183.99

A direct fit, replacement hose and line assembly
SAE J188 compliant high pressure rubber compound hose with internal noise absorber
SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$151.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$57.99

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

Power Steering Filter

from

$7.99

Power Steering Filter

Most Sold 2010 Mazda CX-7 Ball Joints

Explore our best-selling Mazda parts for the 2010 CX-7 among 6 OEM and aftermarket options starting from $43.99.

show more show less

from

$191.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$191.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$43.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$191.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$191.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$65.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

Top-Rated Steering and Chassis Parts Brands For Your 2010 Mazda CX-7

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2010 Mazda CX-7s. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, DriveWorks, and Imperial, and more. Steering and Chassis Parts from these brands that fit a 2010 CX-7 start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2010 Mazda CX-7 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2010 Mazda CX-7, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2010 Mazda CX-7. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $51.99, with an average price of just $60.32. Plus, with over 7 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $51.99

(1)

Suspension Stabilizer Bar Link

“Excellent product”

from $51.99

(5)

Suspension Stabilizer Bar Link

“Exact fit and quality product.Thanks”

from $76.99

(1)

Steering Tie Rod End

“Good product and with the addition of a grease fitting appears to be a better product than oem.”

Popular DriveWorks 2010 Mazda CX-7 Steering and Chassis Parts

DriveWorks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2010 Mazda CX-7 owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2010 CX-7, Advance Auto Parts carries a full inventory of 1 DriveWorks Steering and Chassis Parts. Plus you will be keeping your Mazda in peak condition while saving money because prices on these DriveWorks Steering and Chassis Parts range up to $26.99, plus, with more than 2 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $26.99

(2)

SWAY BAR LINK KIT 1 EA DRIVE

“Perfect”

FAQs for 2010 Mazda CX-7 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2010 Mazda CX-7s?

Out of 54 Steering and Chassis Parts that fit 2010 Mazda CX-7s, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
Camber Bolt Kit (10361721) – $20.49
Strut Alignment Camber Kit (20518167) – $35.49

What’s the price range for 2010 Mazda CX-7 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2010 Mazda CX-7 start at $7.99 and go up to $479.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2010 Mazda CX-7?

The average price for Steering and Chassis Parts for the 2010 Mazda CX-7 is $96.39. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Mazda CX-7 model years?

Yes, we currently carry Steering and Chassis Parts for 4 model years of Mazda CX-7s between 2007 and 2012. Steering and Chassis Parts are bought most frequently for the following model years: 2012, 2011, 2009, 2008, and 2007.

What are the cheapest Steering and Chassis Parts for my 2010 Mazda CX-7?

The cheapest 2010 Mazda CX-7 Steering and Chassis Parts we carry in stock are:

Power Steering Filter (50167394) – $7.99
Mounting Kit System (6014844) – $11.99
Suspension Stabilizer Bar Bushing Kit (11315373) – $15.79
Steering Tie Rod End (50312768) – $18.99
Camber Bolt Kit (10361721) – $20.49

What are the top-rated Steering and Chassis Parts that fit the 2010 Mazda CX-7?

Out of 2,432 reviews by customers, our 2010 Mazda CX-7 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2010 Mazda CX-7 and their top-rated products:

Tie Rods
- Steering Tie Rod End (10119819) – $76.99
- Steering Tie Rod End (10119820) – $76.99
Sway Bars
- Steering Tie Rod End (10119819) – $76.99
- Steering Tie Rod End (10119820) – $76.99

What types of Steering and Chassis Parts do you sell for my 2010 Mazda CX-7?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2010 Mazda CX-7:

Can I get help with 2010 Mazda CX-7 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Steering and Chassis Parts and more.

What is your return policy for Mazda CX-7 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Mazda CX-7 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Mazda CX-7 Steering and Chassis Parts

Cardone – Remanufactured Power Steering Pump (Part No.21-5497)

Imperial – Power Steering Oil Cooler (Part No.241009)

Dorman – Steering Knuckle (Part No.698-192)

Dorman – Suspension Control Arm (Part No.521-211)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201473)

MOOG – Alignment Toe Adjuster (Part No.K100394)

MOOG – Suspension Ball Joint (Part No.K500325)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2055)

Atlantic Automotive Eng – Remanufactured Rack & Pinion (Part No.3445)

Rare Parts – Sway Bar Frame Bushing (Part No.RP22307)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201448)

Rare Parts – Sway Bar Link (Part No.RP17642)

Carquest Premium – Stabilizer Bar Link Kit (Part No.510-95690)

Dorman – Loaded Knuckle (OE Fix) (Part No.698-414)

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Rare Parts – CAM BOLT KIT (Part No.RP16746)

Rein – Power Steering High Pressure Feed Assembly (Part No.PSH0572)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Banjo (Part No.37533)

Whiteline – Control Arm Upper Inner Bushing (Part No.KCA394)

MOOG – Strut Alignment Camber Kit (Part No.K90474)

Carquest Premium – Power Steering End Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.34817)

Rein – Power Steering Return Hose (Part No.PSH0594)

Rare Parts – Tie Rod End (Part No.RP29106)

Carquest Premium – Tie Rod End (Part No.310-257963)

Carquest Premium – Tie Rod End (Part No.310-257962)

Driveworks – Tie Rod End (Part No.DW-ES800601)

MOOG – Steering Tie Rod End (Part No.ES800601)

Dorman – Loaded Knuckle (OE Fix) (Part No.698-414)

Dorman – Steering Knuckle (Part No.698-192)

Dorman – Steering Knuckle (Part No.698-193)

MOOG – Steering Tie Rod End (Part No.ES800601)

MOOG – Steering Tie Rod End (Part No.ES800600)

Carquest Premium – Tie Rod End (Part No.310-257963)

Carquest Premium – Tie Rod End (Part No.310-257962)

Driveworks – Tie Rod End (Part No.DW-ES800601)

Driveworks – Tie Rod End (Part No.DW-ES800600)

Rare Parts – Tie Rod End (Part No.RP29107)

Rare Parts – Tie Rod End (Part No.RP29106)

MOOG – Steering Tie Rod End (Part No.EV801729)

MOOG – Suspension Stabilizer Bar Link (Part No.K80157)

MOOG – Suspension Stabilizer Bar Link (Part No.K80158)

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80157)

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80158)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200806)

Carquest Premium – Stabilizer Bar Link Kit (Part No.510-95690)

Carquest Premium – Stabilizer Bar Link Kit (Part No.510-257973)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201448)

Rare Parts – Sway Bar Link Kit (Part No.RP17641)

Rare Parts – Sway Bar Link (Part No.RP17642)

Rare Parts – Sway Bar Frame Bushing (Part No.RP22307)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201473)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Power Steering Oil Cooler (Part No.241009)

Cardone – Remanufactured Power Steering Pump (Part No.21-5497)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2055)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Banjo (Part No.37533)

Edelmann – Factory New Power Steering Pump with Pulley and Reservoir (Part No.6133PR)

Rein – Power Steering High Pressure Feed Assembly (Part No.PSH0572)

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 14mm Banjo (Part No.37846)

Rein – Power Steering Return Hose (Part No.PSH0594)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – Power Steering Filter (Part No.991-FLT3)

BBB Industries – Power Steering Filter (Part No.991-FLT1)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620896)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620895)

MOOG – Suspension Ball Joint (Part No.K500325)

Dorman – Suspension Control Arm (Part No.521-211)

Dorman – Suspension Control Arm (Part No.521-212)

Rare Parts – Ball Joint (Part No.RP13202)