2010 Jeep Wrangler Air Suspension and Kits

Designed to deliver increased ground clearance, the Rancho® 4.5-in. short arm lift kit delivers the ultimate on- and off-road experience for the Jeep® Wrangler JL. Progressive rate coil springs and adjustable control arms provide comfort and durability.

Product Features:

• ORDERING INFO — Box 3 of 3 for master kit RS66125B, must order RS66125B-1, RS66125B-2 and RS66125B-3 for a complete kit
• COMPATIBILITY — Designed for Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 37-in. tires, get 4.5-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
• COMPLETE SOLUTION — Kit includes front and rear corner-specific progressive rate coil springs, upper and lower control arms, HD front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
• MAINTENANCE-FREE BUSHINGS — Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• REQUIREMENTS — If using Rancho RS55067 or RS999067 shocks with Dynamic Rebound Spring, aftermarket driveshaft is required for max front axle articulation, front RS55065 or RS999065 do not require an aftermarket driveshaft, sold separately
• NOTES — Tire size varies between manufacturers, aftermarket bumpers, sliders, winches, etc. affect height

Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

• Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
• Increase Vehicle Stability, Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
• Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
• Discover The Difference Coil-Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
• No Drill Installation
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Designed to deliver increased ground clearance, the Rancho® 4.5-in. short arm lift kit delivers the ultimate on- and off-road experience for the Jeep® Wrangler JL. Progressive rate coil springs and adjustable control arms provide comfort and durability.

Product Features:

• ORDERING INFO — Box 2 of 3 for master kit RS66125B, must order RS66125B-1, RS66125B-2 and RS66125B-3 for a complete kit
• COMPATIBILITY — Designed for Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 37-in. tires, get 4.5-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
• COMPLETE SOLUTION — Kit includes front and rear corner-specific progressive rate coil springs, upper and lower control arms, HD front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
• MAINTENANCE-FREE BUSHINGS — Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• REQUIREMENTS — If using Rancho RS55067 or RS999067 shocks with Dynamic Rebound Spring, aftermarket driveshaft is required for max front axle articulation, front RS55065 or RS999065 do not require an aftermarket driveshaft, sold separately
• NOTES — Tire size varies between manufacturers, aftermarket bumpers, sliders, winches, etc. affect height

Get your 2-door Jeep® Wrangler JL ready for a day on the trail with the Rancho® 3-in. Sport suspension system. Features Rancho RS5000®X front and rear shocks that provide additional control and reduce body roll.

Product Features:

• ORDERING INFO — Box 2 of 2 for master kit RS66121BR5, must order RS66121BR5-1 and RS66121BR5-2 for a complete kit
• COMPATIBILITY — Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires, aftermarket bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS5000®X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• ENHANCED CONTROL — Rancho RS5000®X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires (tire size varies between manufacturers)

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. Features Rancho RS5000®X front and rear shocks that provide additional control and reduce body roll.

Product Features:

• ORDERING INFO — Box 2 of 2 for master kit RS66124BR5, must order RS66124BR5-1 and RS66124BR5-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS5000®X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• ENHANCED CONTROL — Rancho RS5000®X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Get your 2-door Jeep® Wrangler JK ready for a day on the trail with the Rancho® 2-in. Progressive Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• COMPATIBILITY — Designed for 2-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming, bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Kit includes four Rancho RS9000®XL shocks, front and rear progressive rate coil springs, front bump stops, rear brake line relocation brackets and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

aFe’s RaceRunner front leveling coil springs raise the front of your JL from factory ride height for improved ground clearance over rough terrain, overall vehicle control and offers a level ride height. These RaceRunner coil springs perform with factory or RaceRunner series shocks.

Product Features:

• Cold Formed Chrome Silicone Spring Material
• Heat Treated And Preset For Constant Ride Height

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

aFe Power’s RaceRunner Series shocks for the all new Jeep Wrangler JL offers the best in suspension performance at an affordable price. These shocks have been newly redesigned and tuned for the perfect balance of on-road comfort and off-road performance. Built using high quality CNC machined components, race-proven multi-seal technology, and durable urethane bushings, the RaceRunner shocks provide improved handling on the JL at stock height and up to 2in of lift. A 2.0in diameter monotube cylinder with Internal Floating Piston (IFP) design helps to provide a custom quality look that performs on your Jeep JL on the highway or off-road terrain.

Product Features:

• Monotube Cylinder
• CNC Machined Components
• Internal Floating Piston For Simple Installation
• Multi Seal Carrier For Zero Leakage

Once installed, this set of red bushings provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you n

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

MasterBshKt

Once installed, this red bushing kit provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you need

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

Shock Kit

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:

• 3/16 in. Thick Steel For Strength And Rigidity
• Maximum Corrosion Protection
• Counter Sunk Compressor
• Factory Attachment Points

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Max Performance Synthetic Power Steering Fluid

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions