2010 Jeep Wrangler Belts and Hoses

Below you will find various in-demand Jeep Belts and Hoses, components and accessories for your 2010 Wrangler. Advance Auto Parts has popular Wrangler parts like Serpentine and V Belts, Pulleys, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other Wrangler model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2010 Jeep Wrangler Belts and Hoses below and start saving instantly.

Popular 2010 Jeep Wrangler Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Essential Belts and Hoses for 2010 Jeep Wranglers

from

$78.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Constructed From Plastic And Metal
Hazardous Free Material
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$58.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$66.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$41.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$26.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for increased leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$29.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$23.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$40.49

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$50.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit
Extends Belt And Accessory Drive Bearing Life
Long Lasting

from

$30.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.49

This Litens pulley is manufactured by one of the largest original equipment part suppliers in the world. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$20.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$39.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$12.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$1.99

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$35.49

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$37.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$47.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$33.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$38.49

Is your fan belt cracked or frayed? Is it slipping? Over time rubber belts will deteriorate. It’s easier to replace it now than have a roadside or trail breakdown in the future. Get a high quality serpentine belt for your Jeep from Omix-ADA.

Product Features:

OE Style
Direct Fit
Rubber
Oil Heat And Abrasion Resistant

from

$24.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$25.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.49

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$14.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$25.49

Improved sealing surface for improved leak resistance
Their great flexibility makes installation easy
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

Upgrade your 2010 Jeep Wrangler with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2010 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Belts and Hoses are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Belts and Hoses for the 2010 Jeep Wrangler, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2010 Jeep Wrangler at great prices. Our Belts and Hoses inventory for this model ranges from just $18.79 to $185.99, with an average price of $50.12. Our 26 Belts and Hoses in stock come from 10 trusted brands, so you’re sure to find the right part for your 2010 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Jeep Wrangler, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, DriveWorks, and more. Litens Belts and Hoses start at just $40.49 and boast an impressive 4.7 stars average rating from customers. Dayco and DriveWorks also bring quality to the table, with Belts and Hoses available starting at $24.99, and at an average 4.5 stars rating. With 6,376 customer reviews and counting, our 2010 Jeep Wrangler Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2010 Jeep Wrangler!

Best-Selling Serpentine and V Belts for 2010 Jeep Wranglers

Enhance the driving experience in your Jeep with 6 quality Serpentine and V Belt components, starting at $27.49.

show more show less

from

$32.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$49.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$41.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$27.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$47.49

OE Style
Direct Fit
Rubber
Oil Heat And Abrasion Resistant

Most Popular 2010 Jeep Wrangler Pulleys

Customize your Jeep with 10 Pulleys products like Idler Pulleys and Belt Tensioner Pulleys, all priced under $96.99.

show more show less

from

$40.49

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$29.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.49

Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$18.79

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$45.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed with tight manufacturing tolerances for high durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
High-quality bearings eliminate noise
Mounting hardware included for some common applications
Reliable operation in harsh conditions

from

$39.99

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$96.99

Pulley; Tensioner; 2.8L Diesel; 07-17 Jeep Liberty/Wrangler JK/JKU/KK

from

$38.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit
Extends Belt And Accessory Drive Bearing Life
Long Lasting

from

$37.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

Top Picks for 2010 Jeep Wrangler Belt Tensioners

Upgrade Jeep Wranglers with top-quality Belt Tensioners parts, including 2 OEM and aftermarket selections for your 2010 model.

show more show less

from

$96.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”*part for the aftermarket. This popular tensioner, designed for Jeep Wrangler 3.8L vehicles, looks, fits, and performs like the original part being replaced. Unlike many Non-O.E. aftermarket tensioners, the Litens part maintains the internal damping feature for optimal performance and life. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note – The heavy duty polymer pulley is attached to the tensioner with an integrated bolt/washer, has two molded locator pins for accurate installation, and the tensioner arm maintains the O.E. lift feature for easy belt removal, and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Common O.E. reference number 53032860A Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Durable Polymer Pulleys for long service life and performance.
Professional Mechanics will change this tensioner in approx. 30 minutes
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$78.99

Constructed From Plastic And Metal
Hazardous Free Material
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

In-Demand Radiator Hoses for 2010 Jeep Wranglers

Select from 3 premium Radiator Hoses parts for your 2010 Jeep Wrangler, with prices ranging from $24.99 to $185.99.

show more show less

from

$24.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$185.99

Replace or upgrade factory rubber radiator hoses with aFe POWER BladeRunner radiator hose kit. This kit includes 5-ply polyester reinforced silicone radiator hoses and premium stainless steel hardware. All hoses are routed to factory mounting locations for a simple, durable, secure installation.

Product Features:

Upgrade the factory radiator hoses our 5-Ply reinforced silicone hoses
Increased Temperatures and Pressure Ratings
Quality, Stainless Steel T-Bolt Clamps for a Secure Seal
Works w/Stock Radiator or aFe POWER Radiator

from

$54.99

Are your radiator hoses soft or leaking? Engine heat and time will cause them to deteriorate. It’s always a good idea to replace both radiator hoses and the heater core hoses at the same time. Usually if one hose is bad, the others are close behind.

Product Features:

OE Style
Direct Fit
Keeps Engine At Safe Temperature
Easy Installation

Most Sold 2010 Jeep Wrangler Heater Hoses

Explore our best-selling Jeep parts for the 2010 Wrangler among 2 OEM and aftermarket options starting from $20.99.

show more show less

from

$39.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$20.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Top-Rated Belts and Hoses Brands For Your 2010 Jeep Wrangler

Shop for the best-rated brands offering Belts and Hoses and other products for your 2010 Jeep Wranglers. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and DriveWorks, and more. Belts and Hoses from these brands that fit a 2010 Wrangler start at just $24.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2010 Jeep Wrangler Belts and Hoses

When it comes to maintaining or upgrading your 2010 Jeep Wrangler, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2010 Jeep Wrangler. With over 2 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $40.49, with an average price of just $68.74. Plus, with over 12 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $96.99

(9)

Accessory Drive Belt Tensioner – Original Equipment Quality

“All went well with this purchase.”

from $40.49

(3)

Idler Pulley: Direct Fit, Steel, 87mm Diameter

“Good costumer service was able to fix my problem quick!”

Popular Dayco 2010 Jeep Wrangler Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2010 Jeep Wrangler owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2010 Wrangler, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Dayco Belts and Hoses range from $24.99 to $49.49, plus, with more than 390 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $24.99

(3)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.50" Diameter

“Worked as expected”

from $29.99

(251)

Idler Pulley, Dayco

“Easy to install.”

from $49.49

(136)

Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count

“Works as it should”

FAQs for 2010 Jeep Wrangler Belts and Hoses

Which Belts and Hoses are best-sellers for 2010 Jeep Wranglers?

Out of 26 Belts and Hoses that fit 2010 Jeep Wranglers, the following parts are the top sellers:

Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (5062861) – $32.49
Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (10457737) – $32.49
Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (12025532) – $27.49

What’s the price range for 2010 Jeep Wrangler Belts and Hoses?

Belts and Hose prices for the 2010 Jeep Wrangler start at $18.79 and go up to $185.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2010 Jeep Wrangler?

The average price for Belts and Hoses for the 2010 Jeep Wrangler is $50.12. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Jeep Wrangler model years?

Yes, we currently carry Belts and Hoses for 36 model years of Jeep Wranglers between 1987 and 2025. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2010 Jeep Wrangler?

The cheapest 2010 Jeep Wrangler Belts and Hoses we carry in stock are:

Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (12090983) – $18.79
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 23 Inch Length (11452395) – $20.99
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.50" Diameter (10574554) – $24.99
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.50" Diameter (10574503) – $24.99
Idler Pulley, Dayco (15130072) – $27.49

What are the top-rated Belts and Hoses that fit the 2010 Jeep Wrangler?

Out of 6,376 reviews by customers, our 2010 Jeep Wrangler Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2010 Jeep Wrangler and their top-rated products:

Belt Tensioners
- Accessory Drive Belt Tensioner – Original Equipment Quality (10641155) – $96.99
Serpentine and V Belts
- Accessory Drive Belt Tensioner – Original Equipment Quality (10641155) – $96.99
Radiator Hoses
- Accessory Drive Belt Tensioner – Original Equipment Quality (10641155) – $96.99

What types of Belts and Hoses do you sell for my 2010 Jeep Wrangler?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2010 Jeep Wrangler:

Can I get help with 2010 Jeep Wrangler Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Belts and Hoses and more.

What is your return policy for Jeep Wrangler Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Jeep Wrangler Belts and Hoses

Crown Auto Jeep Replacmnt – OE Replacement (Part No.53032860AA)

Dayco – Automatic Belt Tensioner (Part No.89280)

Dayco – Automatic Belt Tensioner (Part No.89245)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.75 Inch to 1.5 Inch Inner Dia. (Part No.81271)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25527)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9.50" Long, 1.22" Diameter (Part No.C71933)

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 70 mm Diameter (Part No.419-631)

Litens – Idler Pulley: Direct Fit, Steel, 87mm Diameter (Part No.900598A)

Omix – Idler Pulley; 97-06 Jeep Wrangler TJ (Part No.17112.02)

Dayco – Idler Pulley, Dayco (Part No.89007)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 90mm Diameter (Part No.900037A)

Dayco – Idler Pulley, Dayco (Part No.89161)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 27 1/2 Inch Length (Part No.87936)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8-1/2 Inch Length (Part No.87846)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Gates – Premium Molded Heater Hose (Part No.19039)

Driveworks – Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count (Part No.895K6)

Dayco – Poly Rib Belt Serpentine Belt; 91 Long, 6 Rib Count (Part No.5060910)

Dayco – Poly Rib Belt Serpentine Belt; 78.54 Long, 6 Rib Count (Part No.5060785)

Omix – Serpentine Belt; 2.5L/4.0L; 91-95 Jeep Wrangler YJ (Part No.17111.08)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.50" Diameter (Part No.E72468)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.22" Diameter (Part No.E71931)

Dayco – Flex Radiator Hoses; EPDM Rubber, 15 Inch Long, 1.75 Inch to 1.5 Inch Inner Dia. (Part No.81241)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.75" Long, 1.31" Diameter (Part No.B70848)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25526)

Driveworks – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.825K6)

Dayco – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.5060825)

Dayco – Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (Part No.5060900)

Driveworks – Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (Part No.900K6)

Yukon Gear – Seal Puller Tool (Part No.56063)

Omix – Serpentine Belt; 3.8L; 07-11 Jeep Wrangler (Part No.17111.38)

Litens – Idler Pulley: Direct Fit, Steel, 87mm Diameter (Part No.900598A)

Dayco – Idler Pulley, Dayco (Part No.89144)

Dayco – Idler Pulley, Dayco (Part No.89133)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900125A)

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (Part No.419-725)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.36157)

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 88.8 mm Diameter (Part No.419-675)

Omix – Pulley; Tensioner; 2.8L Diesel; 07-17 Jeep Liberty/Wrangler JK/JKU/KK (Part No.17112.19)

Omix – Idler Pulley; 07-11 Jeep Wrangler JK (Part No.17112.07)

Dayco – Idler Pulley, Dayco (Part No.89174)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999816A)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.53032860AA)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.50" Diameter (Part No.E72512)

aFe POWER – Radiator Hose Kit (Part No.46-50004-B)

Omix – Radiator Hose Upper; 3.8L; 07-11 Jeep Wrangler (Part No.17113.27)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 27 1/2 Inch Length (Part No.87936)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 23 Inch Length (Part No.87937)