2010 Honda Fit Fuel and Emissions Systems

Essential 2010 Honda Fit Fuel and Emissions Systems

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 10.63" Long, Heated, Exact Fit (Part No.234-9060)

Wideband Oxygen Sensor: Upstream, 4 Wire, 10.63" Long, Heated, Exact Fit

from

$209.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Carquest Premium – Vapor Canister Shut-Off Valve (Part No.CPC1425)

Vapor Canister Shut-Off Valve

from

$129.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest – Fuel Injector (Part No.67386)

Fuel Injector

from

$58.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
  • Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
  • Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Santech – Evaporation Pres Sen (Part No.E2070822179SII)

Evaporation Pres Sen

from

$122.58
Evaporation Pres Sen

Victor Reinz – Fuel Injection Plenum Gasket Set (Part No.11-54149-01)

Fuel Injection Plenum Gasket Set

from

$21.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Dorman – A Teal Fuel Line Retaining Clip For an Acura or Honda. (Part No.800-046)

A Teal Fuel Line Retaining Clip For an Acura or Honda.

from

$4.99
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0122)

Air Flow Sensor - New Actual OE Part

from

$142.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:
  • Hitachi is a Tier 1 OE supplier for air flow sensors
  • 100% NEW, never remanufactured
  • Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
  • Precision manufactured and assembled sensing elements for accurate air flow measurements
See More

NTK – Switching Oxygen Sensor: 4 Wire, 23.25" Long, Heated, Direct Fit (Part No.24026)

Switching Oxygen Sensor: 4 Wire, 23.25" Long, Heated, Direct Fit

from

$138.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70978)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1115)

Manifold Absolute Pressure Sensor (MAP)

from

$103.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Keyed Alike Locking Fuel Cap

from

$10.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10529)

Fuel Injection Pressure Regulator

from

$133.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.72371)

EGR/EXHAUST AIR SUPPLY GASKET

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1772)

Multi Purpose Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1521)

Exhaust Gas Recirculation (EGR) Valve

from

$284.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Fuel Line Retaining Clip (Part No.800-045)

Fuel Line Retaining Clip

from

$6.49
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC2531)

Vapor Canister Purge Solenoid

from

$112.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – O-RING (Part No.72300)

O-RING

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)

Fuel Injector O-Ring

from

$1.24
Fuel Injector O-Ring

Elring – Fuel Injector Seal (Part No.C1010681908ELR)

Fuel Injector Seal

from

$2.39
Fuel Injector Seal

Carquest Premium – Vapor Canister (Part No.CPN2187)

Vapor Canister

from

$323.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seals, Lock Ring (Part No.FG1264)

Fuel Pump Module Assembly: With Float Arm, Seals, Lock Ring

from

$322.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Lock Ring (Part No.FG1280)

Fuel Pump Module Assembly: With Float Arm, Seal, Lock Ring

from

$374.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Series 7000 Fuel Module (Part No.E3001334673DEL)

Series 7000 Fuel Module

from

$479.75
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

2010 Honda Fit Fuel and Emissions Systems

You count on your 2010 Honda Fit to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 60 Fuel and Emissions Systems ranging in price from $1.24 to $479.75, you’re sure to find everything you need for your 2010 Honda Fit.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 17 different brands like Carquest Premium, Felpro, and Motorad. 2010 Honda Fit Fuel and Emissions Systems start as low as $1.24!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,084 extensive product reviews on 2010 Honda Fit Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap with 4.3 stars and Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.6 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2010 Honda Fit below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2010 Honda Fit

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Honda Fit running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Motorad, and even more.

Popular Felpro Fuel and Emissions Systems

You’ll find popular Felpro brand products across Exhaust Gas Recirculation (EGR) Parts and Fuel Injectors. All are waiting to get your 2010 Honda Fit back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Gas Recirculation (EGR) Valve Gasket
from $1.99
(27)
Exhaust Gas Recirculation (EGR) Valve Gasket
EGR Valve Gaskets
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 2010 Honda Fit, and some of our most reviewed Carquest Premium parts include:

FAQs for 2010 Honda Fit Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2010 Honda Fit?

Out of 60 Fuel and Emissions Systems for the 2010 Honda Fit, the most popular in our inventory are:
Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal
from $61.99
This product is not rated
Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal
Oxygen Sensors

What are the top-rated 2010 Honda Fit Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2010 Honda Fit based on customer reviews/ratings are:
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”