2010 Honda Civic Exhaust System Kits

The MagnaFlow 2016-2020 Honda Civic Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2016-2020 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19313 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19313 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2017-2020 Honda Civic Competition Series Cat-Back Performance Exhaust System 19420 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 1.5L 2017-2020 Honda Civic with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19420 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19420’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
• System Features Polished T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

The MagnaFlow 2017-2020 Honda Civic Competition Series Cat-Back Performance Exhaust System 19394 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 1.5L 2017-2020 Honda Civic with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19394 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19394’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:

• 4 in. Slash Cut/Double Wall/304 Stainless Steel Round Tip
• 2.5 in. Dia. 304 Stainless Steel Brushed Finish Tubing
• Axle-Back
• No Modification Necessary

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:

• Simple Installation
• Leak Free Seal
• Polished 304 Stainless Steel Free Flowing Muffler

This Takeda Cat-Back Exhaust System for the Honda Civic (Sedan) with the L4-1.5L turbo engine utilizes 2-1/2″ into 2-1/4″ stainless steel tubing and incorporates dual, high-flow mufflers for improved performance across the power band. To finish off the exhaust, are dual welded-on 3-1/2″ diameter 304 stainless steel polished tips. This system includes high quality clamps for a secure hassle-free installation. The dual free-flowing mufflers are used to absorb high pitch tones produce a powerful sound and unleashing all available horsepower and torque. High quality band clamps are used for a complete 360 degree sealing surface.

Product Features:

• Mandrel Bent Stainless Steel Tubing For Unrestricted Flow
• Dual High Flow Mufflers
• 304 Stainless Steel Polished Tips
• Tips w/Laser Etched Takeda Logo

aFe’s Takeda stainless steel cat-back exhaust system brings the power and sound to the Honda Civic Si Coupe with L4-1.5L (t) engine. Constructed from 3″ to 2-1/2″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +10 HP and +11 lbs. x ft. torque. 100% hand TIG-welded by certified craftsmen for race proven strength and durability, the Takeda system incorporates dual, free-flowing 304 stainless steel mufflers to improve performance across the power band while maintaining an aggressive tone and long lasting, good looks. Finished with dual round, angle-cut black stainless steel tips etched with Takeda brand logos gives the Civic Si a track-style, custom appearance. Performance Gains: In testing, the cat-back exhaust system resulted in gains up to +10 horsepower and +11 lbs. x ft. of torque, as measured on our in-house dyno. Aggressive Sound: Dual, free-flowing, 304 stainless steel mufflers are used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. Dual Round, Double-Wall, Angle-Cut Black Exhaust Tips: This dual rear-exit system features round, double-wall angle-cut, black stainless steel exhaust tips w/ laser-etched Takeda logo for a custom appearance. Installation Is A Snap: This Takeda exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Dual Free Flowing Stainless Steel Mufflers
• Mufflers Deliver a Deep Aggressive Tone
• Dual Rear Exit Stainless Steel Tips

The MagnaFlow 1992-2000 Honda Civic Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.5L, 1.6L 1992-2000 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Straight Cut Cut Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15643 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15643 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Unleash performance gains of up to +10 HP and +11 lbs. x ft. torque with aFe’s Takeda 3″-2 ½” mandrel bent, 304 stainless steel cat-back exhaust system for your Honda Civic Si Coupe with L4-1.5L (t) engine. This exhaust system is 100% hand TIG-welded by certified craftsmen for race proven strength and durability and designed with dual, free-flowing 304 stainless steel muffler s to improve performance across the power band while maintaining an aggressive tone and long lasting, good looks. Finished with dual 4-3/4″ X 4-1/4″ oval polished stainless steel tips and etched with Takeda brand logos gives the Civic Si a stylish, custom appearance.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Dual Free Flowing Stainless Steel Mufflers
• Mufflers Deliver a Deep Aggressive Tone
• Dual Rear Exit Stainless Steel Tips

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered this system to maintain distinct exhaust tones. All exhaust syst ems are engineered and manufactured in our Corona California manufacturing facility. All systems use factory mounting locations providing stability and hassle free installation. High quality band clamps are used for a complete 360 degree sealing surface. Dual free flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• Incl. High Flow Muffler
• 2.5 in. Dia. Stainless Steel
• 100% Hand MIG Welded
• Dual 304 Double Wall Angle Cut Tips

aFe’s Takeda stainless steel cat-back exhaust system brings the power and sound to the Honda Civic Si Sedan with I4-1.5L (t) engine. Constructed from 3″ to 2-1/2″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +10 HP and +11 lbs. x ft. torque. 100% hand TIG-welded by certified craftsmen for race proven strength and durability, the Takeda system incorporates dual, free-flowing 304 stainless steel mufflers to improve performance across the power band while maintaining an aggressive tone and long lasting, good looks. Finished with dual 4-3/4″ X 4-1/4″ oval black tips etched with Takeda brand logos gives the Civic Si a track-style, custom appearance. Performance Gains: In testing, the cat-back exhaust system resulted in gains up to +10 horsepower and +11 lbs. x ft. of torque, as measured on our in-house dyno. Aggressive Sound: Dual, free-flowing, 304 stainless steel mufflers are used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. Dual Round, Double-Wall, Angle-Cut Black Exhaust Tips: This dual rear-exit system features round, double-wall angle-cut, black stainless steel exhaust tips w/ laser-etched Takeda logo for a custom appearance. Installation is a snap: This Takeda exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Dual Free Flowing Stainless Steel Mufflers
• Mufflers Deliver a Deep Aggressive Tone
• Dual Rear Exit Stainless Steel Tips

Designed for an exact fit, our Exhaust Bolt & Spring. Save time and energy by having the right hardware on hand when you need it.

Product Features:

• Rust and corrosion resistant
• Durable hardened and spring steel construction
• New hardware helps fix exhaust leaks
• Also available separately (where applicable)

Exh.Flange Bolt Spri

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

• KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
• CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• THE RIGHT CONNECTION — Designed to be used for ball and socket joint
• BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust¿s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability
• Quality construction materials to ensure safe and secure exhaust system performance and a long service life
• Manufactured according to strict OE standards
• Sturdy design featuring premium-grade materials
• Compatible with multiple domestic and import vehicles

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust¿s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability
• Quality construction materials to ensure safe and secure exhaust system performance and a long service life
• Manufactured according to strict OE standards
• Sturdy design featuring premium-grade materials
• Compatible with multiple domestic and import vehicles