2010 GMC Savana 1500 Drivetrains

Essential 2010 GMC Savana 1500 Drivetrains

Richmond Gear – Differential Spool (Part No.81-1030-1)

Differential Spool

from

$259.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Dorman – Differential Positive Unit Assembly (Part No.697-909)

Differential Positive Unit Assembly

from

$819.99
Hard use and poor lubrication can wear out a limited-slip differential. Restore original performance with this replacement differential carrier assembly that includes all-new spider gears, differential pins, clutches and carrier housing.

Product Features:
  • Direct replacement – this 30 spline limited-slip differential carrier fits in place of this vehicle’s original equipment carrier
  • 100% new – this differential carrier uses all-new components, including spider gears, diff pin, pre-load spring pack and clutch pack
  • Ready to install – this differential carrier is shipped pre-assembled and ready to install
  • Ideal upgrade – can be used to upgrade from open differential to limited-slip in an existing differential
See More

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$83.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Motive Gear – Ring Gear Bolt (Part No.14066913)

Ring Gear Bolt

from

$2.49


Product Features:
  • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
See More

USA Standard Gear – Standard Spider Gear Set For ’00-’06 GM 8.6" (Part No.39028)

Standard Spider Gear Set For '00-'06 GM 8.6"

from

$209.99
10 Bolt open spider gear set for ’00-’06 8.6″ GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for ’99 vehicles in order to use this spider gear set. This spider gear set fits casting number

Product Features:
  • Fits 2000-2006 GM 8.6″ with open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R10RE)

Differential Bearing Kit - Koyo

from

$104.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • GM 10 BOLT 8.5″ BRG KIT W/EATON OR AUBURN PRO
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Dorman – Help – U-Joint Repair Kit (Part No.81001)

U-Joint Repair Kit

from

$11.49
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Yukon Gear – Universal Joint (Part No.41216)

Universal Joint

from

$189.99
Universal Joint

Yukon Gear – Thrust Washer Kit For GM 7.2" IFS Stub Shaft (Part No.33526)

Thrust Washer Kit For GM 7.2" IFS Stub Shaft

from

$41.99
Product Features:
  • Thrust washer kit
  • Fits GM 7.2″ IFS
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 55040)

Axle Housing Cover Gasket

from

$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R10RLMKT)

Differential Master Bearing Kit - Timken

from

$172.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • BEARING GASKET & SEAL KIT 10 BOLT GM ’99 & UP TIMKEN MASTER
See More

Motive Gear – Differential Carrier (Part No.GM8.6L)

Differential Carrier

from

$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

National – Shaft Repair Sleeve (Part No.99210)

Shaft Repair Sleeve

from

$47.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)

Forged Yoke For GM 8.5" With A 1350 U/Joint Size

from

$354.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Forged steel
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV548979)

CV Axle Shaft Assembly

from

$137.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

USA Standard Gear – 8.5" GM Spartan Locker Cross Pin (Part No.17024)

8.5" GM Spartan Locker Cross Pin

from

$52.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits GM 8.5″ and 8.6″
  • Works with Spartan Locker or standard open spider gears
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

ACDelco – Professional U-Joint (Part No.K1010577082ACD)

Professional U-Joint

from

$30.37
An ACDelco Professional, premium aftermarket Universal Joint provides pivot points for driveshafts and is the ideal high-quality aftermarket replacement component for many vehicles on the road today. A universal joint is comprised of a pair of hinges connected at a right angle that transmits power between two driveshafts. This premium aftermarket replacement universal joint is manufactured to meet your expectations for fit, form, and function. ACDelco offers a full line of Professional, premium aftermarket Chassis Parts to keep vehicles riding and handling like new. With competitive warranty coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it’s no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.

Product Features:
  • Pivot points for driveshafts in your vehicle
  • Comprised of a pair of hinges connected at a right angle
  • Premium, high-quality aftermarket part
  • Thoroughly engineered to meet or exceed your expectations for fit, form, and function
  • Provides the performance and dependability you expect from ACDelco
See More

National – Bearings (Part No.M88048)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.208-SL)

Bearings

from

$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 7.2" Shifter Seal (Part No.30280)

7.2" Shifter Seal

from

$24.99
7.2″ shifter seal.Yukon Mighty seal.

Product Features:
  • Shifter seal
  • Fits GM 7.2″ IFS
See More

FAG – Wheel Bearing (Part No.K8000204410FAG)

Wheel Bearing

from

$62.57
Wheel Bearing

Popular 2010 GMC Savana 1500 Drivetrains Categories

2010 GMC Savana 1500 Drivetrains

You count on your 2010 GMC Savana 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 276 Drivetrains ranging in price from $1.99 to $2,349.99, you’re sure to find everything you need for your 2010 GMC Savana 1500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 28 different brands like Moog, DriveWorks, and Dorman. 2010 GMC Savana 1500 Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,228 extensive product reviews on 2010 GMC Savana 1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.6 stars and Taper Bearing Set with 4.4 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2010 GMC Savana 1500 below to get started!

Top-Rated Drivetrains Brands For Your 2010 GMC Savana 1500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 GMC Savana 1500 running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Dorman, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials and Transfer Cases. All are waiting to get your 2010 GMC Savana 1500 back on the road. Some of the top-rated Felpro products in these categories are:
DIFFERENTIAL GASKET
from $51.99
(5)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets
TRANSFER CASE GASKET SET
from $15.99
(4)
TRANSFER CASE GASKET SET
Transfer Case Adapter Gaskets

FAQs for 2010 GMC Savana 1500 Drivetrains

What are the most purchased Drivetrains for the 2010 GMC Savana 1500?

Out of 276 Drivetrains for the 2010 GMC Savana 1500, the most popular in our inventory are:
Universal Joint
from $20.29
(52)
Universal Joint
U-Joints
Universal Joint Strap Kit
from $11.99
(35)
Universal Joint Strap Kit
U-Joint Strap Kits
Universal Joint
from $20.29
(28)
Universal Joint
U-Joints

What are the top-rated 2010 GMC Savana 1500 Drivetrains?

Top-rated Drivetrains for your 2010 GMC Savana 1500 based on customer reviews/ratings are:
Bearings
from $17.99
(36)
Bearings
“High quality.”
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
“thank you”
Greaseable Premium Universal Joint
from $19.99
(31)
Greaseable Premium Universal Joint
“Good”