2010 Ford Mustang Clutch Systems
Find Your Specific 2010 Ford Mustang Clutch Systems
Below you will find various in-demand Ford Clutch Systems, components and accessories for your 2010 Mustang. Advance Auto Parts has popular Mustang parts like Flywheels, Clutch Master Cylinders, Clutch Kits and more. You’ll also find aftermarket and OEM Clutch Systems for other Mustang model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2010 Ford Mustang Clutch Systems below and start saving instantly.
Popular 2010 Ford Mustang Clutch Systems Categories
Essential Clutch Systems for 2010 Ford Mustangs
LuK – Original Equipment Quality Replacement Flywheel (Part No.LFW460)
from
$147.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.
See More
LuK – OE Quality Flywheel (Part No.LFW189)
from
$163.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
Hays – Flywheels (Part No.12-071)
from
$187.99
Flywheels
ATP – Automatic Transmission Flex Plate (Part No.Z-126)
from
$80.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – FLYWHEEL SHIM (Part No.FS-13)
from
$15.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – M/T FLYWHEEL BOLT (Part No.ZX-1006)
from
$24.49
M/T FLYWHEEL BOLT
ARP Auto Racing – 1 In Under Head Length, 10 Mm X 1.0 Thread Strength, Black Oxide, Chrome Moly (Part No.254-2801)
from
$68.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. that is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.
Product Features:
See More
Product Features:
- Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
- Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
- High Performance Series Is Rated
- Increased Strength
- 1-PC Rear Main Seal
- M10 X 1.0 Thread Size
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each) (Part No.678-154)
from
$4.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$11.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
LuK – Original Equipment Quality Replacement Clutch Slave Cylinder (Part No.LSC379)
from
$241.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Slave Cylinder (Part No.LSC595)
from
$164.99
Meets Original Equipment Specifications & Quality.
Product Features:
See More
Product Features:
- Manufactured From Premium Grade Materials For Superior-Quality Friction Surface & Excellent Heat-Absorption Capacity.
LuK – Original Equipment Quality Replacement Clutch Slave Cylinder (Part No.LSC625)
from
$255.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Master Cylinder (Part No.LMC485)
from
$176.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Hays – Hays450 Cltch 86-00 Must:10.5In:Tko (Part No.91-2003T)
from
$435.99
Hays450 Cltch 86-00 Must:10.5In:Tko
Carquest Premium – Performance Clutch Set 1986-2001 Mustang 10.5" 10 Spline (Part No.30048)
from
$275.99
Zoom Performance Clutches are engineered to meet the challenges posed by street applications. High performance friction surfaces on both of the disc faces are designed to handle serious power and torque after a short break-in period. Its smooth engagement, clean shifts and enhanced wear make it well-suited for street use.
Product Features:
See More
Product Features:
- High Clamp Load Diaphragm cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Street performance design with high performance friction disc
- Where required, includes new clutch release bearing and pilot bearing/bushing to complete the job
- Alignment tool (where available) and hydraulic line disconnect tool (where used) included to ensure professional installation
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.07-038)
from
$155.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Hays – Hays450 Cltch 66-71 Ford Bb:11In:10Spl (Part No.91-2002)
from
$621.99
Hays450 Cltch 66-71 Ford Bb:11In:10Spl
LuK – Clutch Kit: 11" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-195)
from
$261.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.07-042)
from
$153.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Richmond Gear – Differential Cross Shaft (Part No.CSPF9)
from
$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Upgrade your 2010 Ford Mustang with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 2010 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Clutch Systems are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Clutch Systems for the 2010 Ford Mustang, designed to meet your needs without breaking the bank.
From
Flywheel
replacements to
Clutch Master Cylinders
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 2010 Ford Mustang at great prices.
Our Clutch Systems inventory for this model
ranges from just $15.99 to $582.99, with
an average price of $165.44.
Our 15 Clutch Systems in stock come from 5 trusted brands, so you’re sure to find the right part for your 2010 Ford Mustang without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2010 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place.
Start shopping confidently below for your 2010 Ford Mustang!
Best-Selling Flywheels for 2010 Ford Mustangs
Enhance the driving experience in your Ford with 9 quality Flywheel components, starting at $15.99.
LuK – Original Equipment Quality Replacement Flywheel (Part No.LFW393)
from
$213.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.
See More
ATP – Automatic Transmission Flexplate (Part No.Z-484)
from
$113.99
Automatic Transmission Flexplate
Hays – Flywheels (Part No.12-071)
from
$187.99
Flywheels
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ARP Auto Racing – 1 In Under Head Length, 10 Mm X 1.0 Thread Strength, Black Oxide, Chrome Moly (Part No.254-2801)
from
$68.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. that is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.
Product Features:
See More
Product Features:
- Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
- Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
- High Performance Series Is Rated
- Increased Strength
- 1-PC Rear Main Seal
- M10 X 1.0 Thread Size
ATP – Automatic Transmission Flex Plate (Part No.Z-688)
from
$49.99
Vehicles with automatic transmissions have a flex plate. The flex plate connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
Product Features:
See More
Product Features:
- Made of high quality steel.
- Balanced to factory specifications.
- Bolt hole spacing and ring gear teeth match OE part to ensure long life and durability
- Fit and function like the original parts.
- Restores normal vehicle operation.
ATP – Automatic Transmission Flex Plate (Part No.Z-648)
from
$48.99
Vehicles with automatic transmissions have a flex plate. The flex plate connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
See More
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-13)
from
$15.99
FLYWHEEL SHIM
Most Popular 2010 Ford Mustang Clutch Master Cylinders
Customize your Ford with 1 Clutch Master Cylinders products
like Clutch Master Cylinders, all
priced under $176.99.
LuK – Clutch Master Cylinder (Part No.LMC485)
from
$176.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Top Picks for 2010 Ford Mustang Clutch Kits
Upgrade Ford Mustangs with top-quality Clutch Kits parts, including 2 OEM and aftermarket selections for your 2010 model.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.07-188)
from
$379.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.07-202)
from
$582.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
In-Demand Clutch Bellcranks for 2010 Ford Mustangs
Select from 1 premium Clutch Bellcranks parts for your 2010 Ford Mustang.
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Most Sold 2010 Ford Mustang Clutch Slave Cylinders
Explore our best-selling Ford parts for the 2010 Mustang among 2 OEM and aftermarket options starting from $241.99.
LuK – Original Equipment Quality Replacement Clutch Slave Cylinder (Part No.LSC379)
from
$241.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Original Equipment Quality Replacement Clutch Slave Cylinder (Part No.LSC625)
from
$255.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
FAQs for 2010 Ford Mustang Clutch Systems
Which Clutch Systems are best-sellers for 2010 Ford Mustangs?
Out of 15 Clutch Systems that fit 2010 Ford Mustangs, the following parts are the top sellers:
- Original Equipment Quality Replacement Flywheel (12241567) – $213.99
- Clutch Master Cylinder (10650252) – $176.99
- Original Equipment Quality Replacement Clutch Kit (10646601) – $379.99
What’s the price range for 2010 Ford Mustang Clutch Systems?
Clutch System prices for the 2010 Ford Mustang start at $15.99 and go up to $582.99 for the most premium parts.
What’s the average price of a Clutch System for a 2010 Ford Mustang?
The average price for Clutch Systems for the 2010 Ford Mustang is $165.44. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Ford Mustang model years?
What are the cheapest Clutch Systems for my 2010 Ford Mustang?
The cheapest 2010 Ford Mustang Clutch Systems we carry in stock are:
- FLYWHEEL SHIM (11238977) – $15.99
- FLYWHEEL SHIM (10860854) – $25.99
- FLYWHEEL SHIM (10860859) – $26.99
- Automatic Transmission Flex Plate (50263062) – $48.99
- Automatic Transmission Flex Plate (50263081) – $49.99
What types of Clutch Systems do you sell for my 2010 Ford Mustang?
As of 11/2/25, these are some of the most in-demand types of Clutch Systems for a 2010 Ford Mustang:
Can I get help with 2010 Ford Mustang Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Clutch Systems and more.
What is your return policy for Ford Mustang Clutch Systems?
Advance Auto Parts keeps returns simple. For new Ford Mustang Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
