2010 Ford F-550 Super Duty Body Parts

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

New CAPA Certified Premium Replacement Hood Panel, Made Of High-Strength Steel, For Superduty Models

Product Features:

• Made Of High-Strength Steel, For Superduty Models
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum HD air intake system from the front of the vehicle. This scoop is constructed of high quality plastic for greater strength and unique styling. This scoop is a perfect upgrade to the Momentum HD cold air intake system (P/N: 50/51-73004). Lower Intake Air Temperature: Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front of the vehicle into the air intake auxiliary scoop. High Quality D.A.S Scoop: This Dynamic Air Scoop is constructed with high quality plastic for greater strength and unique styling.

Product Features:

• CAD-Designed Roto-Molded Dynamic Air Scoop
• Directs Forward Pressurized Air Into Intake System
• Direct Snap-On Installation
• No Cutting Or Drilling Required

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
• Durable construction -manufactured within strict tolerances for reliable longevity.
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Window Regulator w/

Window Regulator

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

• The Motorcraft Interior Lamp Switch Assembly is the spring-loaded plunger design electrical switch that is mounted in the vehicle door frame and operates the on/off function of the interior -courtesy light- when the door is opened or closed.
• Motorcraft Interior Lamp Switch Assembly is engineered and manufactured to exact Ford OE specifications to ensure O.E. quality and performance.
• As with all Motorcraft after market parts, any engineering innovations or product improvements that have been developed since the vehicle’s assembly are added to the Interior Lamp Switch Assembly, ensuring the most current technology.

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
• Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Convenient pack – this value pack includes the left and right door lock actuator motors for certain popular vehicle applications.
• Perfect fit – engineered to provide the same fit and function of the original equipment actuator motors.
• Safety compliant – parts have undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Door Lock Actuator

This door check is designed to match the fit and function of the original check on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this door check is designed to match the fit and function of the original check on specified applications.
• Restores functionality – this door check is made to fully restore part functionality after the original door check fails.
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Door Lock Actuator

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This door belt molding is designed to replace missing or damaged molding at the bottom of the door window opening. This molding does not replace exterior door trim. Check the product details to select the right door belt molding for your application.

Product Features:

• Ideal solution – this door belt molding is designed to replace missing or damaged door belt molding at the bottom of the door window opening on specified vehicles.
• Restores appearance – engineered to match the fit and function of the factory molding that is missing, damaged, or deteriorated from exposure to the elements
• Durable construction – made of quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Door Open Warning Sw

This door belt molding is designed to replace missing or damaged molding at the bottom of the door window opening. This molding does not replace exterior door trim. Check the product details to select the right door belt molding for your application.

Product Features:

• Ideal solution – this door belt molding is designed to replace missing or damaged door belt molding at the bottom of the door window opening on specified vehicles.
• Restores appearance – engineered to match the fit and function of the factory molding that is missing, damaged, or deteriorated from exposure to the elements
• Durable construction – made of quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Door Open Warning Sw

Door Open Warning Sw

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front left door handle includes an added gasket to prevent water intrusion.
• Matching appearance – identical smooth plastic design is ready to paint to match the rest of your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

• Ideal replacement – this window crank handle matches the fit and function of the original equipment component.
• Durable construction – this window crank handle is made of durable material to withstand extended use
• Easy to install – this window crank requires no special tools to install
• Versatile design – this window crank handle is suitable for use in various locations in the vehicle

Constructed of reinforced plastic or steel for endurance, our Tailgate Handle stands up to severe weather conditions and years of handling. Plus, it’s designed to fit the exact design of your car.

Product Features:

• Tailgate Handle Textured Black.
• Tailgate Handle Textured Black
• Constructed of reinforced plastic or steel for endurance, our Tailgate Handle stands up to severe weather conditions and years of handling. Plus, it’s designed to fit the exact design of your car.
• May be painted to match the original color
• Includes spring and clips (where applicable)

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front left door handle includes an added gasket to prevent water intrusion.
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

This tailgate latch is designed to match the fit and function of the original latch on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this tailgate latch is designed to match the fit and function of the original latch on specified vehicles.
• Restores functionality – this latch is made to fit and fully restore part functionality after the original latch fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front left door handle includes an added gasket to prevent water intrusion.
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front right door handle includes an added gasket to prevent water intrusion.
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

• Ideal replacement – this window crank handle matches the fit and function of the original equipment component.
• Durable construction – this window crank handle is made of durable material to withstand extended use
• Easy to install – this window crank requires no special tools to install
• Versatile design – this window crank handle is suitable for use in various locations in the vehicle

This tailgate latch bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this tailgate latch bracket matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front right door handle includes an added gasket to prevent water intrusion.
• Matching appearance – identical smooth plastic design is ready to paint to match the rest of your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement rear left door handle includes an added gasket to prevent water intrusion.
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Door Lock Actuator

This door latch cable matches the dimensions of the original equipment cable to restore proper function. Made of quality materials for reliable service, this part has been tested for a dependable fit.

Product Features:

• Ideal replacement – this door latch cable matches the dimensions of the original equipment cable to restore function.
• Durable construction – this cable is made using quality materials to ensure reliable service.
• Cost-effective solution – offers original equipment function at a competitive price
• Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

Restore the ease and convenience of remotely locking or unlocking any one of your vehicle’s doors with Dorman’s Door Lock Actuator Motor. The actuator returns the power door lock to proper operation-and our robust plastic housing helps protect the actuator from damage, ensuring year after year of service.

Product Features:

• Direct replacement for a proper fit every time
• High quality electric motor
• Durable construction
• Vehicle try-on testing has been conducted on this part to ensure trouble-free performance

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement passenger side door handle includes an added gasket to prevent water intrusion.
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement rear right door handle includes an added gasket to prevent water intrusion.
• Matching appearance – identical smooth plastic design is ready to paint to match the rest of your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

New Standard Replacement Driver Side Exterior Front Door Handle, Smooth Black Finish

Product Features:

• Smooth Black Finish, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

This tailgate handle matches the fit and function of the original handle in specific vehicles. Constructed of durable materials, this handle is manufactured to quality standards to ensure reliability over the long haul.

Product Features:

• Direct replacement – this tailgate handle matches the fit and function of the original handle on specific vehicles.
• Durable construction – this part is made of quality materials for a long service life
• Saves money – this tailgate handle delivers original equipment quality at a competitive price
• Quality assured – this tailgate handle has undergone testing to assure proper fit and durability over a long service life

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Improved design – the door handle material has been upgraded from plastic to metal for greater durability than the factory part
• Direct fit – designed to match the dimensions and operation of the stock handle on specified vehicles
• Seamless replacement – matches the appearance of the factory door handle to blend with the vehicle’s original design
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front right door handle includes an added gasket to prevent water intrusion
• Matching appearance – made of chrome to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Window crank handle busted on your Ford, Lincoln or Mazda? It happens a lot when window regulator lubrication dries up, and moisture and debris make their way past the belt molding as a vehicle ages. The extra effort required to turn it strips the plastic splines or the handle may just crack entirely. This Dorman OE FIX window crank handle replaces the original equipment handle, but the splines and arm are upgraded to metal to increase durability and longevity. Replace that broken handle with this one and you can hopefully avoid shopping for a new one again. Note: the window crank knob differs slightly from the OEM design – for a matched appearance, order enough cranks for the entire vehicle.

Product Features:

• Upgraded replacement – this window crank handle features a metal arm and metal splines to help prevent future failures.
• Easy to install – requires no special tools for installation; installs just like most standard crank handles on your Ford, Lincoln or Mazda
• Pro tip – the appearance varies slightly from the factory design, so replace all handles for a seamless look
• Trustworthy quality – backed by a team of automotive experts in the United States and a century of experience

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Window Handle 1 Pc Atocf

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount.
• Quality construction – manufactured from premium materials for a long service life.
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Truck bed loose from rusted or missing hardware? This truck bed mounting hardware matches the fit of the original equipment mounting hardware to securely remount the truck bed to the frame.

Product Features:

• Ideal replacement – this bed mounting hardware kit contains all the necessary components to completely remount the truck bed to the frame.
• Durable construction – this truck bed hardware is finished with a corrosion-resistant coating for a long service life.
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount.
• Quality construction – manufactured from premium materials for a long service life.
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount.
• Quality construction – manufactured from premium materials for a long service life.
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

This body mount nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this body mount nut matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue.
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

New Standard Replacement Driver Side Front Rocker Panel, Crew And Super Cab, 40 X 6 X 5

Product Features:

• Crew And Super Cab, 40 X 6 X 5, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• 3 Year Warranty

New Standard Replacement Passenger Side Front Rocker Panel, Crew And Super Cab, 40 X 6 X 5

Product Features:

• Crew And Super Cab, 40 X 6 X 5, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• Mounting Braces Not Included
• Widened 6 Inch Step Area
• No Drilling Required

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• 3 Year Warranty

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• 3 Year Warranty

Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Product Features:

• Corrosion Resistant Black Powder-Coated Stainless Steel
• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Features A Notched Bar Design With Heavy-Duty Step Plate
• Includes Rust Resistant Stainless Steel Step Plates
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Product Features:

• Corrosion Resistant Black Powder-Coated Stainless Steel
• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Features A Notched Bar Design With Heavy-Duty Step Plate
• Includes Rust Resistant Stainless Steel Step Plates
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 120 To 180 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 120 To 180 Minute Professional Installation Time
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris

Whether you are looking for additional traction or easier vehicle entry, TrailFX Running Boards offer a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials, and designed with style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.

Product Features:

• 3003-H24 Aluminum Step Finished With Titanium Black Powder Coat Ensures Maximum Strength And Durability
• 6.5 Inch Wide Stepping Area, Which Runs The Full-Length Of The Vehicle Features Aggressive Grated Surface Designed For Maximum Footing In All Weather Conditions
• Heavy Duty Plastic End Caps Add A Clean, Finished Appearance While Keeping The Elements Out
• Steel Mounting Brackets And Protective Accent Trim Are Included To Install To Rocker Panel
• Provides Moderate Protection Against Road Hazards And Debris
• No Drill, Bolt-On Installation Makes Installation Simple
• Easy Bolt-On Installation

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Chrome

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• Mounting Braces Not Included
• Widened 6 Inch Step Area
• No Drilling Required

Whether you’re looking for additional traction or easier vehicle entry, TrailFX Running Boards offer a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials, and designed with style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.

Product Features:

• Heavy Duty 14 Gauge, Precision Stamped Carbon Steel Deck Is E Coated And Finished In Industrial Grade Powder Coat To Resist Rust And Corrosion
• 6.5 Inch Wide Stepping Area, Which Runs The Full Length Of The Vehicle Features Aggressive Traction Lugs Designed For Maximum Footing In All Weather Conditions
• 1 Piece Stamped Steel End Caps Are Welded Directly To The Deck
• Track Mounting System Allows For Multiple Mounting Positions To Clear Mud Flaps
• Fully E Coated Brackets Are Included Along With Required Hardware And Instructions For Easy Installation

Whether you are looking for additional traction or easier vehicle entry, TrailFX Running Boards offer a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials, and designed with style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.

Product Features:

• 3003-H24 Aluminum Step Finished With Titanium Black Powder Coat Ensures Maximum Strength And Durability
• 6.5 Inch Wide Stepping Area, Which Runs The Full-Length Of The Vehicle Features Aggressive Grated Surface Designed For Maximum Footing In All Weather Conditions
• Heavy Duty Plastic End Caps Add A Clean, Finished Appearance While Keeping The Elements Out
• Steel Mounting Brackets And Protective Accent Trim Are Included To Install To Rocker Panel
• Provides Moderate Protection Against Road Hazards And Debris
• No Drill, Bolt-On Installation Makes Installation Simple
• Easy Bolt-On Installation

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad
• Lifetime Warranty

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• Limited Lifetime Warranty

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• Limited Warranty

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• Limited Warranty

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

Truck step that can handle the day to day abuse that you are going to deliver while adding style to your vehicle. Dee Zee has forged our 6 Inch Brite-tread Side Steps with durable .090 Brite-Tread finish aluminum, and finished it off with molded plastic step pads to provide a no-nonsense non-slip surface. there is something about a truck with bright accessories that just exudes style and power. Bright truck accessories give your ride a sharp yet understated look and can blend in more with other accessories. Our 16-guage steel mounting brackets and underside are coated with NRT (TM) texture black Powder Coated protection to stop rust in its tracks. Comes in 3 cab lengths for full-size pickups, regular, extended, and crew. Mounting braces are specifically designed for your truck to ensure a perfect fit and eliminate the need to drill your frame.

Product Features:

• Mount Kit Not Included
• Drilling Not Required
• Black Tread Covers Exterior Surface Areas
• 6 Inch Wide Design To Maximize Step Area
• Molded Step Pads At Each Door Provide Unmatched Traction
• Feature NRT (TM) Texture Black Powder Coated Protection

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Dual UV-Resistant Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Mounting Brackets Feature Molded Trim Covers For A Seamless Installation: Trapezoid Step Shape Offers A Unique, Attractive Design That Adds Style To Any Vehicle
• Provides Moderate Protection Against Road Hazards And Debris

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with 304 stainless steel, meaning they are high in nickel content to be truly resistant to rust and corrosion. For a lasting shine and a bright accent on your vehicle, they are given a highly polished, mirror-like finish. They are also available in semi-gloss black powder-coated aluminum. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit. The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process (NOTE: Mounting brackets for these side bars are sold separately. See the application information to find which brackets and side bars fit your vehicle).

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and 91. To ensure a perfect fit Vehicle-Specific Mounting Kits are required and are purchased separately. Each mounting kit is exactly machined for a No-Drill Installation.

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Dual UV-Resistant Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Mounting Brackets Feature Molded Trim Covers For A Seamless Installation: Trapezoid Step Shape Offers A Unique, Attractive Design That Adds Style To Any Vehicle
• Provides Moderate Protection Against Road Hazards And Debris

The Signature Series Step Bars are designed with usability and value for money in focus. They are made in galvanized mild steel with a chrome finish. The custom made mounting kits ensure easy installation for all applications.

Product Features:

• 3 in. Round Tube
• Galvanized Mild Steel
• Recessed Step Area
• Mount Kit Included
• No Drill Installation
• Adds Perfect Finishing Touch To Vehicle
• 3 Year Warranty

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with 304 stainless steel, meaning they are high in nickel content to be truly resistant to rust and corrosion. For a lasting shine and a bright accent on your vehicle, they are given a highly polished, mirror-like finish. They are also available in semi-gloss black powder-coated aluminum. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit. The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process (NOTE: Mounting brackets for these side bars are sold separately. See the application information to find which brackets and side bars fit your vehicle).

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Gloss Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style of popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with aluminum alloy to be strong and lightweight. Aluminum construction makes them completely impervious to rust, and for an extra layer of corrosion protection, they come with a durable semi-gloss black powder coat finish. They are also available in polished 304 stainless steel. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit. The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process (NOTE: Mounting brackets for these side bars are sold separately. See the application information to find which brackets and side bars fit your vehicle).

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• Aluminum alloy construction to be lightweight and rust-free
• Durable semi-gloss black powder coat finish for maximum corrosion resistance
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Westins Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4″ wide recessed step area. Platinum 4 Oval Nerf Step Bars are vehicle specific applications that feature a no-drill installation.

Product Features:

• 90 Degree Mandrel Bends
• 4 in. Wide Step Pad
• 4.25 in. Wide At Widest Dimension
• Black Powdercoat E-Coat Mild Steel
• Mount Kit Included

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyones needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Rocker Panel Mount
• Has A 300 Pounds Capacity
• Provides A Larger Step For Secure Footing, Easy Vehicle Access, And Improved Ground Clearance
• Limited 3 Year Warranty

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyones needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product. The 4 Inch Oval Side Step provides an extra wide step area for better footing. Available in polished stainless steel, or durable, powder coated mild steel, all feature easy installation and great looks. Slip resistant molded step pads will not fade or crack and can be ordered with custom logs.

Product Features:

• Mounting Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minutes Professional Installation Time
• TrailFX Bed Oval Tube Side Steps Provide A Wide And Flat Step Area For Maximum Grip And Stability When Entering Or Exiting Your Vehicle
• Oval Tube Side Steps Feature Fully Welded Ends. No Plastic To Break Or Loosen, And They Look Great. Easy Install
• Limited 3 Year Warranty

there is something about a truck with bright accessories that just exudes style and power. Bright truck accessories give your ride a sharp yet understated look and can blend in more with other accessories. Our 16-guage steel mounting brackets and underside are coated with NRT (TM) texture black powder coat protection to stop rust in its tracks. Comes in 3 cab lengths for fullsize pickups, regular, extended, and crew. Mounting braces are specifically designed for your truck to ensure a perfect fit and eliminate the need to drill your frame.

Product Features:

• NRT (TM) Powder Coat Corrosion Protection
• Custom Fit Application
• Brite Tread Covers Exterior Surface Areas
• No Drill Installation

The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

ARIES 6″ oval side bars come in four universal lengths, while the side mounting brackets are vehicle-specific. With vehicle-specific mounting brackets, you get a custom fit for your unique truck or SUV and easier installation. Plus, ARIES 6″ oval mounting brackets will work with both finish options, giving you freedom of customization. They feature high-strength carbon steel construction and come with a semi-gloss black powder coat finish for excellent resistance to rust, wear and tear.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable powder coat finish
• Side bars sold separately (see application information)