2010 Ford Expedition Front Wheel Bearings
Your 2010 Ford Expedition might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Front Wheel Bearings you desperately need.
We currently carry 8 Front Wheel Bearings to choose from for your 2010 Ford Expedition, and our inventory prices range from as little as $175.99 up to $375.26.
On top of low prices, Advance Auto Parts offers 5 different trusted brands of Front Wheel Bearings for the 2010 Ford Expedition. We only sell parts from trusted brands like Moog so that you can find quality parts you can count on.
Don’t take our word for it – check out customer ratings and reviews to buy with confidence. We have 16 reviews on our Front Wheel Bearings for the 2010 Ford Expedition from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Front Wheel Bearings stock in-person!
Front Wheel Bearings for Your 2010 Ford Expedition
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.515094)
from
$240.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.515095)
from
$234.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Carquest Premium – Hub Assembly with Wheel Bearing 94-255807: With Mounting Hardware (Part No.94-255807)
from
$207.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Driveworks – Wheel Bearing and Hub Assembly: 6 Studs (Part No.NT515094)
from
$175.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
Carquest Premium – Hub Assembly with Wheel Bearing 94-255806 (Part No.94-255806)
from
$225.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Motorcraft – Wheel Hub Assembly (Part No.K70011349449MTR)
from
$375.26
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.
Product Features:
See More
Product Features:
- Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
- Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
- Special bearing seals to help keep out contaminants, the number one cause of bearing failure
- Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
- Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
- Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
- Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
- Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
- Integral bearing races specifically designed to each application, no one-size-fits-all solution
- Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
- Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
- Original equipment specifications minimize any possibility of the hub cracking
- Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
- Tapered roller bearings for high load rates when specified
Motorcraft – Wheel Hub Assembly (Part No.K70011334764MTR)
from
$320.99
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.
Product Features:
See More
Product Features:
- Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
- Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
- Special bearing seals to help keep out contaminants, the number one cause of bearing failure
- Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
- Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
- Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
- Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
- Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
- Integral bearing races specifically designed to each application, no one-size-fits-all solution
- Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
- Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
- Original equipment specifications minimize any possibility of the hub cracking
- Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
- Tapered roller bearings for high load rates when specified
Dorman – Wheel Bearing and Hub Assembly: Front, 6 Studs (Part No.951-877)
from
$317.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
FAQs for 2010 Ford Expedition Front Wheel Bearings
What are the most popular Front Wheel Bearings for the 2010 Ford Expedition?
With 5 brands you can trust, our most popular Front Wheel Bearings for the 2010 Ford Expedition parts are:
from
$207.99
This product is not rated
Hub Assembly with Wheel Bearing 94-255807: With Mounting Hardware
Front Wheel Bearings
