2010 Ford E-450 Super Duty Differentials

Name: Pinion Install Kit For Dana 60 Rear Differential
Brand: Yukon Gear
SKU: 13032
Price: 295.99 USD

Find your specific 2010 Ford E-450 Super Duty original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2010 Ford E-450 Super Duty Differentials

from

$295.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 60 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$13.99

Product Features:

PINION SHIM – DANA 70 ALL

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$289.99

Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

from

$79.99

Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:

Seal housing for Dana Spicer 60
Includes o-rings

from

$261.99

Yukon yoke for Ford 8″ IRS. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Ford 10.25″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$1487.99

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:

Fits Ford 10.25″ and 10.5″
Forged case and 8620 internals for added strength
Works with a variety of air delivery systems
Assembled in the USA

from

$549.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits 1999-2010 Ford 10.5″
10.50″ ring gear diameter
31 spline pinion
12 ring gear bolts
3.73 ratio

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$409.99

This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Dana Spicer 80 with 4.375″ O.D. pinion bearing
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, marking compound and brush.

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$6.99

Product Features:

Oil baffle for Dana Spicer 60 and Dana Spicer 70U

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$864.99

Yukon replacement axle shaft for Dana S135, 36 spline, 40.5″ long. Yukon axles come with a one year warranty against manufacturing defects..

Product Features:

36 spline
40.5″ long
Fits Dana Spicer S135

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$27.49

Product Features:

Brand may vary by location

from

$156.99

Product Features:

Fits Ford 10.5″
Steel

from

$99.99

Zip Locker soleniod valve.

Product Features:

Solenoid valve

from

$1195.00

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit fits full floating applications only.

Product Features:

Fits Ford 10.25″ and 10.5″
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$16.99

Product Features:

Brand may vary by location

from

$6.99

Ring Gear bolt for Ford 10.25″ & 10.5″. 1/2″ x 20.

Product Features:

Ring gear bolt for Ford 10.25″ and 10.5″
1/2″ x 20 thread

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$1566.99

21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:

Bearing race driver set
21 pieces
All steel construction

from

$1151.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This unit fits full floating applications only.

Product Features:

Fits Ford 10.25″ and 10.5″
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

Popular 2010 Ford E-450 Super Duty Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Carrier Bearings

Front Differential Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Differential Conversion Spacers

Maybe you’re in the middle of a full rebuild of that 2010 Ford E-450 Super Duty. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 159 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 2010 Ford E-450 Super Duty running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Ford E-450 Super Duty. Yukon Gear, National, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2010 Ford E-450 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 119 reviews in this category, some of the top rated parts include Tapered Cone Wheel Bearing Assembly with 4.0 stars and Differential Ring and Pinion with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2010 Ford E-450 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2010 Ford E-450 Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Ford E-450 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-450 Super Duty the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Front Differential Cover Gaskets categories, plus more. For a 2010 Ford E-450 Super Duty, our most popular Felpro Differentials include:

from $15.99

(1)

Differential Cover Gasket

Front Differential Cover Gaskets

Top 2010 Ford E-450 Super Duty Differentials from National

National products are another trusted brand when it comes to Differentials for your 2010 Ford E-450 Super Duty. Popular National parts include:

from $9.99

(8)

Bearings

Rear Differential Pinion Bearings

FAQs for 2010 Ford E-450 Super Duty Differentials

What are the most purchased Differentials for the 2010 Ford E-450 Super Duty?

Out of 159 Differentials for the 2010 Ford E-450 Super Duty, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $13.79

(4)

Taper Bearing Set

Differential Bearings

from $5.99

This product is not rated

Dana 60, Dana 70 & Dana 80 Cover Bolt

Differential Cover Bolts

What are the top-rated 2010 Ford E-450 Super Duty Differentials?

Top-rated Differentials for your 2010 Ford E-450 Super Duty based on customer reviews/ratings are:

from $16.99

(2)

Tapered Cone Wheel Bearing Assembly

“Worked sell”

from $245.99

(1)

Differential Ring and Pinion

“You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”

from $13.99

(1)

Ford 10.25" & 10.5" Cover Gasket

“how the hell am i supposed to know what size and shape my differential cover gasket is?dana or ford.why isn’t there a vin entry somewhere on the webpa”

2010 Ford E-450 Super Duty Differentials

More 2010 Ford E-450 Super Duty Differentials

Essential 2010 Ford E-450 Super Duty Differentials

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design (Part No.16181)

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

USA Standard Gear – Standard Spider Gear Set For Ford 10.25" (Part No.39013)

Yukon Gear – Zip Locker For Ford 10.25" & 10.5", Full Float Only (Part No.34025)

Yukon Gear – High Performance Ring & Pinion Gear Set For ’10 & Down Ford 10.5" In A 3.73 Ratio (Part No.24332)

National – Bearings (Part No.15245)

USA Standard Gear – Bearing Kit For Dana 80, ’98-’03 Ford (Part No.58004)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Yukon Gear – Replacement Axle Shaft For Dana S135, 36 Spline, 40.5" Long (Part No.21742)

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)

Yukon Gear – Finned Aluminum Cover For Ford 10.5", ’08 & Up (Part No.32325)

Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

Yukon Gear – Dura Grip For Ford 10.25" & 10.5" (Part No.26031)

Driveworks – Differential Pinion Seal (Part No.S-100715-V)

Yukon Gear – Ring Gear Bolt For Ford 10.25" & 10.5" (Part No.33042)

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Yukon Gear – Grizzly Locker, Ford 10.25" & 10.5" With 35 Splines (Part No.28026)

Popular 2010 Ford E-450 Super Duty Differentials Categories