2010 Dodge Challenger Exhaust Parts
More 2010 Dodge Challenger Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2010 Dodge Challenger, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2010 Dodge Challenger Exhaust Parts
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49241)
from
$507.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49241. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2006-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 356AA and 4581 744AD, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.26202)
from
$483.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26202. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2006-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 356AA and 4581 744AD, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Dynomax – 53716 Exhaust Pipe (Part No.53716)
from
$182.99
Made from quality materials for durability, DynoMax® direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax® pipe
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.60496-1)
from
$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61240)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
JBA Performance – 1 1/2" Header Shorty Stainless Steel (Part No.1920SJS)
from
$752.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1920SJS 1 1/2″ Header Shorty Stainless Steel 05-10 Dodge Magnum/Charger/300/Challenger 3.5L Silver Ceramic
- Mandrel bent stainless steel tube
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-473)
from
$203.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dynomax – 36459 Exhaust Pipe Spout (Part No.36459)
from
$37.99
Customize your exhaust system with a DynoMax® stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax® logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)
from
$2.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp Band Bolt Dia Length Nut Type Lock Pipe Dia 2.75 (Part No.36522)
from
$26.99
Complete your exhaust repair with a Walker® MEGA preformed band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
- PREMIUM MATERIALS – Made from a variety of materials including low-carbon steel or stainless steel for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Manifold Gasket Set (Part No.MS 96964)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66037)
from
$51.99
Seal-4-Good Header Flange Gasket
Edelbrock – Exhaust Manifold Gasket Set for Chrysler (Part No.7236)
from
$30.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Taylor Gaskets – Vibe-Lock Bolt (Part No.310071)
from
$92.99
Vibe-Lock Bolt
Dorman – Help – Exhaust Manifold Mount Hardware Kit Stainless Steel (Part No.03309HP)
from
$55.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of M8-1.25 x 40mm exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Flowmaster Inc. – Super 44 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.843048)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942041)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Outlaw Race Muffler, 3in Center Inlet 3in Center Outlet, 11in long, Non-Reversible, Aggressive Sound (Part No.15430)
from
$133.99
Outlaw mufflers are designed to be connected directly to the header collectors or can be added into an existing exhaust system. Recommended for racing applications where a muffler is required without a set decibel limit to be met. Please call the Flowmaster tech-line for assistance with specific decibel requirements and applications.
See More
aFe POWER – MACH Force-Xp Cat Back Exhaust System: No Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-32060)
from
$1553.99
Add more power and sound to your Challenger with this MACH Force-Xp cat-back system. Dual 3″ mandrel-bent, MIG welded, 304 stainless steel tubing with x-pipe and crossover balance tube keeps exhaust flowing smoothly and evenly for power gains you can feel and hear. This system utilizes spherical clamps to retain the factory tips for a stock appearance. Dual stainless steel, high flow mufflers finished in high temp powder coating deliver an aggressive, performance exhaust note.
Product Features:
See More
Product Features:
- Outflows and Outlasts Factory Exhaust
- Incorporated X-Pipe/Crossover Balance Tube
- Equalizes and Evenly Distribute Exhaust Pulses Reducing Drone
- Mufflers Finished in High Temp Coating Delivers Aggressive Note
Borla Performance Exhaust – T-304 Ss, 2.25"Pipe Diameter, Dual Exhaust With Dual Exit, Dual Split Rear Exit (Part No.140650)
from
$1493.99
BORLA(R) has developed a revolutionary exhaust technology that enables our engineers to deliver unprecedented vehicle specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100 Percent of the power adding capabilities of BORLA(R) patented multicore design. Called ATAK(R) (Acoustically-Tuned Applied Kinetics), this new technology produces the highest available Decibel levels in the BORLA(R) street-legal line-up, and is designed for high performance purists who prefer exhaust notes over their stereos. The focus of ATAK(R) is to pump the volume while retaining clarity of sound, avoiding distortion typically found in louder exhausts. With ATAK(R), the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high volume output.
Product Features:
See More
Product Features:
- Designed For High-Performance
- Equipped Exhaust Systems Deliver The Highest Available Decibel Levels
- Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
- ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores
MBRP Exhaust – Ss, 3"Dia Pipe, Dual Exhaust With Dual Split Rear Exit, 4"Carbon Fiber Quad Tips (Part No.S71143CF)
from
$1188.99
For the serious performance enthusiast who demands the best of the best. For your vehicle, there is no better stainless steel than T304 and no better system than the MBRP Pro Series. With the highest chromium and nickel content of any exhaust, this is simply the best system money can buy. The Pro Series comes with mirror polished, dual wall T304 stainless steel tip included.
Product Features:
See More
Product Features:
- T304 Stainless Steel Construction
- Welded On Hangers
- Aggressive, Real Muscle Car Sound
- Bolt-On Installation
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15851)
from
$898.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15851 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15851 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03309CD)
from
$46.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2010 Dodge Challenger Exhaust Parts Categories
2010 Dodge Challenger Exhaust Parts
You count on your 2010 Dodge Challenger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 63 Exhaust Parts ranging in price from $2.49 to $2,101.99, you’re sure to find everything you need for your 2010 Dodge Challenger.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 12 different brands like Walker, Dorman, and Felpro. 2010 Dodge Challenger Exhaust Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 66 extensive product reviews on 2010 Dodge Challenger Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are HM Grade Federal / EPA Compliant Universal Catalytic Converter with 3.3 stars and Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed with 4.5 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2010 Dodge Challenger below to get started!
Top-Rated Exhaust Parts Brands For Your 2010 Dodge Challenger
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Dodge Challenger running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.
Popular Walker Exhaust Parts
You’ll find popular Walker brand products across Catalytic Converters and Exhaust Fittings. All are waiting to get your 2010 Dodge Challenger back on the road. Some of the top-rated Walker products in these categories are:
from
$509.99
(1)
Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed
Catalytic Converters
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 2010 Dodge Challenger, and some of our most reviewed parts include:
FAQs for 2010 Dodge Challenger Exhaust Parts
What are the most purchased Exhaust Parts for the 2010 Dodge Challenger?
Out of 63 Exhaust Parts for the 2010 Dodge Challenger, the most popular in our inventory are:
from
$99.99
(3)
40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
What are the top-rated 2010 Dodge Challenger Exhaust Parts?
Top-rated Exhaust Parts for your 2010 Dodge Challenger based on customer reviews/ratings are:
from
$519.99
(2)
Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed
“I took the part to my dealership to have them put it on my 2009 Chrysler and it was a perfect fit and great price! Advance auto is now my favorite aut”
from
$92.99
(1)
Vibe-Lock Bolt
“I was putting them on my new BBK headers and on of them broke right off. Brand new. I was torquing then down. So luckily I didn’t have everything back”
