2010 Chevrolet Express 4500 Bodies and Fender Parts

Essential 2010 Chevrolet Express 4500 Bodies and Fender Parts

KAI – Quarter Panel Extension (Part No.GM1703110)

Quarter Panel Extension

from

$44.99
New Standard Replacement Passenger Side Rear Quarter Panel Extension

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel Extension (Part No.GM1702110)

Quarter Panel Extension

from

$44.99
New Standard Replacement Driver Side Rear Quarter Panel Extension

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.RRP3192)

Quarter Panel

from

$184.99
New Standard Replacement Front Passenger Side Lower Quarter Panel, 30 X 12 X 3

Product Features:
  • 30 X 12 X 3, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Extension Panel (Part No.GM1243108)

Fender Extension Panel

from

$29.99
New Standard Replacement Passenger Side Fender Lower Rear Extension

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Extension Panel (Part No.GM1242108)

Fender Extension Panel

from

$29.99
New Standard Replacement Driver Side Fender Lower Rear Extension

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Step Bumper Face Bar (Part No.GM1102397V)

Step Bumper Face Bar

from

$434.99
New Economy Replacement Rear Bumper Face Bar, Chrome, 1996 New Style, Without Park Assist Sensor Holes

Product Features:
  • Chrome, 1996 New Style, Without Park Assist Sensor Holes, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Step Bumper Face Bar (Part No.GM1102553V)

Step Bumper Face Bar

from

$254.99
New Economy Replacement Rear Bumper Face Bar, Paint To Match

Product Features:
  • Paint To Match, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)

Windshield Garnish Clip - Exterior

from

$4.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:
  • Constructed of high-quality materials for long-lasting durability
  • Many different styles are available, including threaded and wide panel
  • Packaged in a variety of piece counts for use with both small and large projects
  • Also suitable for a broad range of industrial and commercial uses
See More

Dorman – GM Trim Panel Clip (Part No.963-211D)

GM Trim Panel Clip

from

$4.49
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:
  • Constructed of high-quality materials for long-lasting durability
  • Many different styles are available, including threaded and wide panel
  • Packaged in a variety of piece counts for use with both small and large projects
  • Also suitable for a broad range of industrial and commercial uses
See More

KAI – Fender Splash Shield (Part No.GM1250131)

Fender Splash Shield

from

$22.99
New Standard Replacement Driver Side Fender Splash Shield

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

Chrysler, GM Panel Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Rocker Panel (Part No.RRP2820)

Rocker Panel

from

$24.99
New Standard Replacement Driver Or Passenger Side Universal Outer Rocker Panel, 42 X 3.25

Product Features:
  • 42 X 3.25, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP2822)

Rocker Panel

from

$33.99
New Standard Replacement Passenger Side Rocker Panel, Slip-On Type For Sliding Door

Product Features:
  • Slip-On Type For Sliding Door, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Nylon Shield Retainer (Part No.963-230)

Nylon Shield Retainer

from

$2.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Panel Trim Retainer – Interior – GM/Chrysler/AMC (Part No.45490)

Panel Trim Retainer - Interior - GM/Chrysler/AMC

from

$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Fender Apron (Part No.GM1247117)

Fender Apron

from

$64.99
New Standard Replacement Passenger Side Fender Apron Extension

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Apron (Part No.GM1246117)

Fender Apron

from

$64.99
New Standard Replacement Driver Side Fender Apron Extension

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7"W x 90"L (Part No.DZ15321S)

Powder Coated, Black, Steel, Unlighted, 7"W x 90"L

from

$506.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More

Dee Zee – Powder Coated, Silver, Brite Tread Aluminum, Unlighted, Front Doors Only (Part No.DZ1034)

Powder Coated, Silver, Brite Tread Aluminum, Unlighted, Front Doors Only

from

$402.99
Dee Zee Brite-Tread Running Boards Get a step up into your vehicle while adding styling and protection. Constructed of heavy Gauge Brite-Tread aluminum. BriteGard powder coat finish helps aluminum stay looking new. Raised tread surface provides secure footing as you enter and exit. Sturdy bracing and hardware is coated to help prevent rust and keep your boards strong. Cab Section Only (matching bed section may be available).

Product Features:
  • The Classic Style That Started It All For Dee Zee
  • Diamond Plate Texture And Non-Rusting Brite-Tread Aluminum Construction Provides Excellent Footing
  • BriteGard Powder Coating Prevents Oxidation
  • Raised Tread Surface Provides Secure Footing As You Access Your Bed
  • Protective BriteGard Powder Coat Finish
  • Custom Fit Application Ensures Quick And Easy Installation
See More

Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Requires Running Board Mounting Kit (Part No.DZ15321A)

Powder Coated, Black, Aluminum, Unlighted, Requires Running Board Mounting Kit

from

$609.99
Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you Do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:
  • Rugged 12 Gauge Steel Construction Or Heavy Duty Aluminum
  • NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Grated Steel Top Provides Unmatched Traction
  • Dirt And Water Drain Away To Keep The Board Clear Of Debris
  • Made In Americas Heartland USA
See More

Dee Zee – Cradle Mount, Drilling Required, For Dee Zee Rough Step Boards (Part No.DZ15316)

Cradle Mount, Drilling Required, For Dee Zee Rough Step Boards

from

$178.99
Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:
  • Rugged 12-Gauge Steel Construction Or Heavy Duty Aluminum
  • NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Grated Steel Top Provides Unmatched Traction
  • Dirt And Water Drain Away To Keep The Board Clear Of Debris
  • Made In America Heartland – USA
See More

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7" W X 36" L, Front Doors Only (Part No.DZ15300S)

Powder Coated, Black, Steel, Unlighted, 7" W X 36" L, Front Doors Only

from

$311.99
Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you Do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:
  • Rugged 12 Gauge Steel Construction Or Heavy Duty Aluminum
  • NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Grated Steel Top Provides Unmatched Traction
  • Dirt And Water Drain Away To Keep The Board Clear Of Debris
  • Made In America’s Heartland ┐ USA
See More

2010 Chevrolet Express 4500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 2010 Chevrolet Express 4500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 24 different Bodies and Fender Parts in our inventory ranging from $1.79 to $634.99. That means you can find the exact parts or products you need to keep that 2010 Chevrolet Express 4500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Chevrolet Express 4500. Dorman, KAI, and Dee Zee are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 2010 Chevrolet Express 4500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 2010 Chevrolet Express 4500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 2010 Chevrolet Express 4500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Chevrolet Express 4500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Express 4500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Dorman Bodies and Fender Parts

We carry Dorman parts in our stock across Rocker Panel Molding Retainers categories, plus more. For a 2010 Chevrolet Express 4500, our most popular Dorman Bodies and Fender Parts include:
Panel Trim Retainer - Interior - GM/Chrysler/AMC
from $1.79
(1)
Panel Trim Retainer – Interior – GM/Chrysler/AMC
Rocker Panel Molding Retainers

FAQs for 2010 Chevrolet Express 4500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 2010 Chevrolet Express 4500?

Out of 24 Bodies and Fender Parts for the 2010 Chevrolet Express 4500, the most popular in our inventory are:
GM Trim Panel Clip
from $4.49
This product is not rated
GM Trim Panel Clip
Fender Splash Shields
Chrysler, GM Panel Retainer
from $4.49
This product is not rated
Chrysler, GM Panel Retainer
Splash Shield Retainers
Nylon Shield Retainer
from $2.49
This product is not rated
Nylon Shield Retainer
Rocker Panel Molding Retainers