2010 Buick Lucerne Air Intakes
More 2010 Buick Lucerne Air Intakes Categories
If you’re looking for an original Air Intakes replacement for a 2010 Buick Lucerne, you can search through our selection below. You’ll also find aftermarket and OEM Air Intakes to meet your needs.
Essential 2010 Buick Lucerne Air Intakes
GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-3109)
from
$11.79
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest – Electrical Connector (Part No.PT978)
from
$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Utilizing high grade materials to ensure peak conductivity and perfect connections
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Carquest Premium – Multi Purpose Connector (Part No.PTA1357)
from
$34.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Hitachi – Electronic Throttle Body: New (Part No.ETB0016)
from
$272.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.
Product Features:
See More
Product Features:
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- Hitachi is a Tier 1 OE supplier for Throttle bodies
- 100% NEW, never remanufactured
- Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
- Powerful electric motor provides quick and accurate response for optimal engine efficiency
- Electronics are sealed to prevent contamination that may result in inaccurate readings
- Detailed manufacturing tracking system using QR codes
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61447)
from
$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61466)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
GM Genuine Parts – Coolant Pipe O-Ring (Part No.24504709)
from
$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – GM Drive Type Rivet (Part No.963-208D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Panel Trim Retainer – Interior – GM/Ford/Chrysler (Part No.45680)
from
$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
NTK – Air Charge Temperature Sensor (Part No.EF0008)
from
$25.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
- NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
- Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.
GM Genuine Parts – BODY ASM-THROT (W/ THROT ACTR) (Part No.217-3156)
from
$238.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps provide air flow for proper fuel/air mixture
- Allows for a quick throttle response
- Assists in cold engine starts
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone New – Throttle Body (Part No.6E-3023)
from
$303.99
Throttle Body
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98014 T)
from
$97.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MIK 98015 T)
from
$159.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Included all parts needed to complete the repair
- Included all parts needed to complete the repair
Carquest Premium – Throttle Position Sensor w/ Hardware (Part No.ECC1089)
from
$259.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
ACDelco – GM Original Equipment Intake Manifold Assembly (Part No.B1200580215ACD)
from
$934.93
The ACDelco GM Original Equipment Engine Intake Manifold is a GM-recommended replacement for your vehicle’s original component. The intake manifold evenly distributes the incoming engine air to each of the cylinders, ensuring the proper amount of air mixes with the proper amount of fuel. This original equipment engine intake manifold has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications
- Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Lower Aluminum Intake Manifold (Part No.615-280)
from
$547.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
Dorman – Body Bolt With Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)
from
$1.29
These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)
from
$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
Popular 2010 Buick Lucerne Air Intakes Categories
2010 Buick Lucerne Air Intakes
You count on your 2010 Buick Lucerne to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 28 Air Intakes ranging in price from $1.29 to $934.93, you’re sure to find everything you need for your 2010 Buick Lucerne.
Brands matter. If you want to shop a specific Air Intakes brand, we stock 9 different brands like Dorman, Felpro, and NTK. 2010 Buick Lucerne Air Intakes start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 313 extensive product reviews on 2010 Buick Lucerne Air Intakes. Some of the top-rated Air Intakes products we carry are Electric Throttle Body: Remanufactured with 4.3 stars and Engine Intake Manifold Gasket Set with 3.0 stars.
Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 2010 Buick Lucerne below to get started!
Top-Rated Air Intakes Brands For Your 2010 Buick Lucerne
Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Buick Lucerne running right for years to come. In our inventory you’ll find brands like Dorman, Felpro, NTK, and even more.
Popular Hitachi Air Intakes
You’ll find popular Hitachi brand products across Throttle Bodies & Carb Parts. All are waiting to get your 2010 Buick Lucerne back on the road. Some of the top-rated Hitachi products in these categories are:
Top-Rated Felpro Air Intakes
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Air Intakes for your 2010 Buick Lucerne, and some of our most reviewed Felpro parts include:
FAQs for 2010 Buick Lucerne Air Intakes
What are the most purchased Air Intakes for the 2010 Buick Lucerne?
Out of 28 Air Intakes for the 2010 Buick Lucerne, the most popular in our inventory are:
from
$25.99
This product is not rated
Air Charge Temperature Sensor
Intake Manifold Temperature Sensors
What are the top-rated 2010 Buick Lucerne Air Intakes?
Top-rated Air Intakes for your 2010 Buick Lucerne based on customer reviews/ratings are:
from
$281.99
(6)
Electric Throttle Body: Remanufactured
“The computer took 4 drive cycles to learn even when I followed to learn procedure to the letter. The idle was high until the new throttle body was le”
from
$61.99
(1)
Lower & Upper Intake Manifold Gasket Set: 6 Piece Set
“I would avoid these as the lower gaskets use plastic instead of metal. They might hold up just fine but considering the labor involved installing them”
