2010 BMW 335i Steering and Chassis Parts

Below you will find various in-demand BMW Steering and Chassis Parts, components and accessories for your 2010 335i. Advance Auto Parts has popular 335i parts like Power Steering Parts, Ball Joints, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other 335i model years including 2007, 2008, 2009, 2011, 2012, 2013, 2014, 2015 and more. Select a category of 2010 BMW 335i Steering and Chassis Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2010 BMW 335i Steering and Chassis Parts Categories

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Subframe Bushings

Power Steering Pressure Hoses

Radius Arm Bushings

Steering Knuckles

Power Steering Reservoirs

Power Steering Return Hoses

Rack and Pinion Boots

Sway Bar Bushings

Tie Rod Assemblies

Power Steering Fluid Level Sensors

Power Steering Reservoir Hoses

Essential Steering and Chassis Parts for 2010 BMW 335is

from

$321.99

Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Every Unit is fully disassembled, cleaned, and inspected which ensures that defects are identified and corrected to allow for an extended service life
All shafts and internal surfaces are examined, reconditioned, and polished which prevents premature failure of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering pump
All assembled units are 100% end-of-line tested for leaks, noise, and performance to ensure that the product has the same functionality as intended by the OE

from

$18.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

All Rein automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.

from

$44.99

Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$44.99

Not your typical remove and replace bushing kit but simple installation means great for the DIYer’s. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as ‘lost motion’ of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Product Features:

Inserts are designed to work with the original factory bushing rather than replacing it.
Specially bonded design for optimised strength typically required in high load bearing applications.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Specially bonded design for optimised strength typically required in high load bearing applications.
Inserts are designed to work with the original factory bushing rather than replacing it.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$235.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$95.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$41.99

P/S FLUID RESERVOIR

from

$467.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$49.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs & wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$119.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$68.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$60.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$65.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$22.79

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$32.99

The engine cooling system is critical to engine sustainability under all operating conditions. The Coolant Level Sensor reports the level of coolant either in the radiator overflow container or in the radiator tank.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$32.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$34.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$719.99

aFe Control is proud to introduce the PFADT Series, ZL-Spec Sway Bars for the 2012-2014 Camaro V8 models. Designed to ZL chassis specifications, the 4130 Chromoly sway bars will transform your Camaro’s handling and inspire driving confidence. Perfectly balanced, both front and rear bars are 32mm, lightweight tubular construction and offer 3 adjustment holes allowing for fine tuning your Camaros feel to your driving style. The kit includes heavy duty sway bar brackets with grease fittings, and greaseable polyurethane bushings for added performance and a quiet ride. For years of durability and great looks, the bars are powder-coated gun metal grey and are a direct fit on 2012-2014 V8 models. Perfectly balanced, aFe Control sway bars will have your Camaro ZL spec handling just as good at the track as it will around town.

Product Features:

Direct Fit Installation
Requires No Modifications
Durable
Gun Metal Grey

from

$218.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 27mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.

Product Features:

Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$54.99

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$26.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$13.99

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.

Product Features:

Rein boot kits come with all the needed hardware and components for the complete repair.
All components are manufactured to strict engineering standards/specifications in materials and tolerances
Rein also offers a full line of individual boots.
Matches original equipment design specifications

from

$767.99

This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$779.99

This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$40.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

Upgrade your 2010 BMW 335i with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2010 BMW 335i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Steering and Chassis Parts are key to keeping your 335i functioning at its best. At Advance Auto Parts, we offer a wide selection of 69 Steering and Chassis Parts for the 2010 BMW 335i, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Ball Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2010 BMW 335i at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $12.99 to $779.99, with an average price of $137.08. Our 69 Steering and Chassis Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2010 BMW 335i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 BMW 335i, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, and more. Moog Steering and Chassis Parts start at just $63.99 and boast an impressive 4.5 stars average rating from customers. With 63 customer reviews and counting, our 2010 BMW 335i Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 BMW 335i is always ready to roll. We’re committed to providing you with everything you need to keep your 335i in top shape, all in one place. Start shopping confidently below for your 2010 BMW 335i!

Best-Selling Power Steering Parts for 2010 BMW 335is

Enhance the driving experience in your BMW with 24 quality Power Steering Part components, starting at $13.99.

show more show less

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$32.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$26.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$467.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$235.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$514.99

REMAN STEERING RACK

from

$408.99

AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.

Product Features:

Manufactured Again Certified quality process
Each unit is 100% hydraulically tested for pressure and flow.
Racks are remanufactured with OE grade, high temperature seals and O-rings for increased durability and performance.

from

$321.99

Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Every Unit is fully disassembled, cleaned, and inspected which ensures that defects are identified and corrected to allow for an extended service life
All shafts and internal surfaces are examined, reconditioned, and polished which prevents premature failure of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering pump
All assembled units are 100% end-of-line tested for leaks, noise, and performance to ensure that the product has the same functionality as intended by the OE

from

$296.99

NEW P/S PUMP

from

$245.99

PS PUMP-NEW

from

$121.99

PS PUMP-NEW

from

$91.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures

from

$60.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$54.99

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$53.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$41.99

Steering Rack and Pinion Bellows Kit

from

$41.99

P/S FLUID RESERVOIR

from

$40.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$34.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$32.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$13.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

Top Picks for 2010 BMW 335i Sway Bars

Upgrade BMW 335is with top-quality Sway Bars parts, including 19 OEM and aftermarket selections for your 2010 model.

show more show less

from

$64.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$64.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$35.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$12.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Manufactured to strict engineering standards/specifications in materials and tolerances
Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair

from

$45.99

from

$45.99

from

$65.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$480.99

Engineered to ‘Activate More Grip’, BBK004 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 27mmm front sway bar and 20mm rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$409.99

aFe Control is proud to introduce the Front Sway Bar for the 2007-2013 BMW 335i (E90/92). Designed specifically for the E90/E92, the lightweight tubular sway bar will transform your 335i’s handling and inspire driving confidence. Cornering will be flatter and neutral in any corner. The 32mm front bar is constructed from lightweight tubular steel and features precision CNC machined, TIG welded bar ends for a perfect fit. The kit includes CNC machined 6061-T6 sway bar bushing brackets that are a direct fit for the included polyurethane bushings. For years of durability and great looks, the front sway bar is powder-coated a special 2 stage tangerine orange and are a direct fit on the 2007-2013 BMW 335i (E90/92). aFe Control front sway bar will have your 335i handling just as good at the track as it will around town. Also available is a matching rear sway bar (P/N: 440-503003RN) or a complete set (P/N: 440-503003-N).

Product Features:

Adjustable Front Bars
CNC Machined

from

$218.99

Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$186.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 20mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.

Product Features:

Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$170.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 16mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$123.99

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$119.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$62.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$28.88

Product Features:

The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.

from

$23.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair

from

$22.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair

from

$22.79

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

In-Demand Tie Rods for 2010 BMW 335is

Select from 10 premium Tie Rods parts for your 2010 BMW 335i, with prices ranging from $53.99 to $94.99.

show more show less

from

$63.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$63.99

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$94.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$91.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$91.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$68.99

from

$65.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$57.99

from

$57.99

from

$53.99

This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.

Product Features:

Trustworthy replacement – this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
Durably designed – factory-sealed and precision-forged housing resists future corrosion
Reliably engineered – built to decrease wear rate and ensure overall strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

Most Sold 2010 BMW 335i Chassis

Explore our best-selling BMW parts for the 2010 335i among 2 OEM and aftermarket options starting from $44.99.

show more show less

from

$155.99

SUBFRAME BUSHING

from

$44.99

Inserts are designed to work with the original factory bushing rather than replacing it.
Specially bonded design for optimised strength typically required in high load bearing applications.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Specially bonded design for optimised strength typically required in high load bearing applications.
Inserts are designed to work with the original factory bushing rather than replacing it.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

Top-Rated Steering and Chassis Parts Brands For Your 2010 BMW 335i

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2010 BMW 335is. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, and more. Steering and Chassis Parts from these brands that fit a 2010 335i start at just $63.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2010 BMW 335i Steering and Chassis Parts

When it comes to maintaining or upgrading your 2010 BMW 335i, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2010 BMW 335i. With over 1 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $63.99. Plus, with over 1 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $63.99

(1)

Steering Tie Rod End

“Quick shipping, well packaged”

FAQs for 2010 BMW 335i Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2010 BMW 335is?

Out of 69 Steering and Chassis Parts that fit 2010 BMW 335is, the following parts are the top sellers:

Power Steering Filter (10659735) – $35.49
Steering Tie Rod End (10413240) – $63.99
Suspension Stabilizer Bar Link (21880428) – $64.99

What’s the price range for 2010 BMW 335i Steering and Chassis Parts?

Steering and Chassis Part prices for the 2010 BMW 335i start at $12.99 and go up to $779.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2010 BMW 335i?

The average price for Steering and Chassis Parts for the 2010 BMW 335i is $137.08. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other BMW 335i model years?

Yes, we currently carry Steering and Chassis Parts for 7 model years of BMW 335is between 2007 and 2015. Steering and Chassis Parts are bought most frequently for the following model years: 2015, 2014, 2013, 2012, 2011, 2009, 2008, and 2007.

What are the cheapest Steering and Chassis Parts for my 2010 BMW 335i?

The cheapest 2010 BMW 335i Steering and Chassis Parts we carry in stock are:

Bushing (11323023) – $12.99
Power Steering Filter (50308546) – $13.99
Bushing (11825243) – $18.99
Sway Bar Bushing (12244708) – $22.79
Bushing (11873523) – $22.99

What are the top-rated Steering and Chassis Parts that fit the 2010 BMW 335i?

Out of 63 reviews by customers, our 2010 BMW 335i Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2010 BMW 335i and their top-rated products:

Tie Rods
- Steering Tie Rod End (10413224) – $63.99

What types of Steering and Chassis Parts do you sell for my 2010 BMW 335i?

As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2010 BMW 335i:

Can I get help with 2010 BMW 335i Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Steering and Chassis Parts and more.

What is your return policy for BMW 335i Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new BMW 335i Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 BMW 335i Steering and Chassis Parts

Carquest Premium – Remanufactured Power Steering Pump – Hydraulic (Part No.990-0878CQ)

Rein – Bushing (Part No.AVB0571)

Whiteline – Radius Arm Lower Bushing (Part No.W83391)

Whiteline – Subframe Mount Bushing Inserts (Part No.KDT918)

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 16mm Banjo (Part No.40397)

Dorman – Suspension Control Arm (Part No.520-553)

Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0044)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2838)

Carquest Premium – Tie Rod End (Part No.310-235356)

Rare Parts – Sway Bar Link (Part No.RP19672)

Rein – Tie Rod (Part No.SCT0329)

Rein – P/S Return Hose (Part No.PSH0221)

Rare Parts – Sway Bar Frame Bushing (Part No.RP22348)

Rare Parts – Sway Bar Bushing (Part No.RP22398)

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)

Rein – P/S Suction Hose (Part No.PSH0309)

Rein – P/S Suction Hose (Part No.PSH0194)

aFe POWER – Sway Bar Set FR/RR (Part No.440-503002-N)

Whiteline – Non-Adjustable Sway Bar – Front, 27mm (Part No.BBF43)

Rare Parts – Rack & Pinion Bellows (Part No.RP57345)

MOOG – Rack & Pinion Bellows Kit (Part No.K150283)

Rein – Power Steering Rack Boot Kit (Part No.BKK0146)

Dorman – Knuckle (Part No.698-259)

Dorman – Knuckle (Part No.698-258)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)

MOOG – Rack & Pinion Bellows Kit (Part No.K150283)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2838)

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 16mm Banjo (Part No.40397)

Carquest Premium – REMAN STEERING RACK (Part No.26-2838CQ)

Atlantic Automotive Eng – Remanufactured Rack & Pinion (Part No.3313)

Carquest Premium – Remanufactured Power Steering Pump – Hydraulic (Part No.990-0878CQ)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5801N)

Lares – PS PUMP-NEW (Part No.13454)

Lares – PS PUMP-NEW (Part No.13456)

Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)

Rein – P/S Return Hose (Part No.PSH0221)

Rare Parts – Rack & Pinion Bellows (Part No.RP57345)

Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)

Dorman – Steering Rack and Pinion Bellows Kit (Part No.541-501)

Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0044)

Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)

Rein – P/S Suction Hose (Part No.PSH0194)

Rein – P/S Suction Hose (Part No.PSH0309)

Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620129)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620128)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620127)

Dorman – Suspension Control Arm (Part No.520-560)

Dorman – Suspension Control Arm (Part No.520-554)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11230)

Dorman – Suspension Control Arm (Part No.520-559)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11231)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11487)

Dorman – Suspension Control Arm (Part No.520-553)

Rein – Bushing (Part No.AVB0571)

MOOG – Suspension Stabilizer Bar Link (Part No.K750003)

MOOG – Suspension Stabilizer Bar Link (Part No.K750002)

MOOG – Suspension Stabilizer Bar Link (Part No.K750230)

Rein – Bushing (Part No.AVB0342R)

Rein – Sway Bar Link (Part No.SCL0237P)

Rein – Sway Bar Link (Part No.SCL0236P)

Rare Parts – Sway Bar Frame Bushing (Part No.RP22348)

Whiteline – Sway Bar Kit – Front & Rear (Part No.BBK004)

aFe POWER – Front Sway Bar (Part No.440-503003FN)

Whiteline – Non-Adjustable Sway Bar – Front, 27mm (Part No.BBF43)

Whiteline – Non-Adjustable Sway Bar – Rear, 20mm (Part No.BBR44)

Whiteline – Heavy Duty Rear Sway Bar, 16mm (Part No.BBR46)

Whiteline – Front Adjustable Sway Bar Link (Part No.KLC154)

Rare Parts – Sway Bar Link (Part No.RP19672)

Rare Parts – Sway Bar Link (Part No.RP16322)

Whiteline – Sway Bar Bushing Service Kit (Part No.KSK104-20)