Name: Tie Rod End
Brand: Rein
SKU: SCE0214P
Price: 49.99 USD

from

$49.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$83.15

Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:

Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
Comes with bolts and washers (where applicable)
Easy to install
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$58.99

Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$48.78

P/S Pump Pulley

from

$12.55

Power Steering Reservoir Cap

from

$231.99

The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$22.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$1.46

Washer

from

$26.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$108.02

Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$44.06

Power Steering Reservoir

from

$208.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

from

$19.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$84.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$15.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

All Rein automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.

from

$318.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$12.99

Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:

Includes all the bolts needed to complete the job.
Comes with torque specs to make sure each bolt is properly tighten
Manufactured to strict engineering standards/specifications in materials and tolerances
Aluminum bolts are torque to yield and must be replaced once they are released.

from

$374.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$115.13

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$672.99

Engineered to ‘Activate More Grip’, BBK004 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 27mm fixed front sway bar and 20mm fixed rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$291.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 27mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$492.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$587.34

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$108.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$183.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$39.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$47.83

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features: