2009 Toyota Camry Power Steering Parts

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100 percent tested and calibrated pressure relief valves.
• Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100 percent tested and calibrated pressure relief valves.
• Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
• Enables you to achieve a more efficient, durable, and professional installation

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
• Enables you to achieve a more efficient, durable, and professional installation

Edelmann Elite power steering pumps represent a step up in quality and performance over typical aftermarket brand power steering pumps and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each pump is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every pump has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

• Every component is 100% completely new, never reused
• Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
• Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
• Includes necessary hardware where applicable (o-ring, washers, etc…)
• Pre-installed pulley and reservoir for ease and time saving install
• U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

Edelmann Elite power steering pumps represent a step up in quality and performance over typical aftermarket brand power steering pumps and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each pump is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every pump has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

• Every component is 100% completely new, never reused
• Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
• Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
• Includes necessary hardware where applicable (o-ring, washers, etc…)
• Pre-installed pulley and reservoir for ease and time saving install
• U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

NEW P/S PUMP

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

• Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Meets or exceeds O.E. performance.

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• OE quality, braided rubber compound hose
• Coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

This power steering return hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this power steering return hose is designed to match the fit and function of the original hose on specified vehicles
• Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• OE quality, braided rubber compound hose
• Coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

• A direct fit, replacement hose with clamps
• OE quality, braided rubber compound hose
• Pre attached protective jacket(s) and heat sleeve(s), where required
• Ensures proper operation of the power steering system

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

• A direct fit, replacement hose with clamps
• OE quality, braided rubber compound hose
• Pre attached protective jacket(s) and heat sleeve(s), where required
• Ensures proper operation of the power steering system

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Zinc coated tubes protect against rust and corrosion
• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Heat/abrasion tubing protects vital areas

Power Steering Return Hose, 3/8" Beaded Tube x 3/8" I.D. Hose

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Zinc coated tubes protect against rust and corrosion
• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Heat/abrasion tubing protects vital areas

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• OE quality, braided rubber compound hose
• Coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• OE quality, braided rubber compound hose
• Coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• OE quality, braided rubber compound hose
• Coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

• Protective coating applied to each unit to extend the life of the unit (where applicable).
• 100 percent performance testing to ensure perfect fit, function and reliable performance.
• 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
• Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
• 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
• All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
• Valve housings have polished micro-finish sleeves for durability (where applicable).
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

• 100 percent replacement of rubber sealing components.
• Application of specialized lubricant(s) for extended life.
• Finished in protective coating to prevent corrosion and rust.
• Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Edelmann Elite power steering rack and pinions represent a step up in quality and performance over typical aftermarket brand power steering racks and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each rack is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every rack has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

• Every component is 100% completely new, never reused
• Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
• Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
• Complete with Inner Tie Rods & Boots
• Includes necessary hardware where applicable (o-ring, washers, etc…)
• Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
• U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR Rack and Pinions are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
• Precision Routed and Constructed Fluid Transfer Tubes
• Manufactured to meet or exceed OE requirements
• Engineering, test, and quality validation in the USA

NEW RACK & PINION

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

• Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
• Performance testing ensures perfect fit, function and reliable performance.
• Computerized spool valve balancing ensures exceptional steering feel.
• Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
• Built to meet or exceed O.E.M. performance.

AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.

Product Features:

• Manufactured Again Certified quality process
• Each unit is 100% hydraulically tested for pressure and flow.
• Racks are remanufactured with OE grade, high temperature seals and O-rings for increased durability and performance.

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Imperial mounting kit system
• For installation of transmission coolers and electric fans
• Provides quick, effective installation of Imperial products
• Contains nylon mounting rods, foam pads and locking buttons
• Aftermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation
• Aftermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission oil cooler hose
• 11/32″ x 4-1/2′
• Designed for transmission fluid applications
• Made for tight-radius applications found in transmission cooler installations
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Power steering oil cooler
• Size: 3/4″ x 2-1/2″ x 9″
• For vehicles with 3/8″ I.D. power steering return hose
• Removes destructive heat and prolongs power steering system life
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Medium-duty power steering oil cooler
• Size: 3/4″ x 2-1/2″ x 12″
• For vehicles with 3/8″ I.D. power steering return hose
• Removes destructive heat and helps prolong power steering system life

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Built to withstand a variety of weather conditions and extreme temperatures, our power steering pressure hoses are designed to last through daily wear and tear while delivering smooth and quiet performance, every time. Each hose in the Edelmann Elite line has a durable zinc coating that actively protects against and helps to prevent rust and corrosion damage, and each hose also features innovative heat/abrasion tubing that is specifically designed to hold up to a range of temperatures – from the freezing cold to extreme heat waves. Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity. Every Edelmann Elite hose is equipped with the identical OEM fitting as the hose being replaced. This ensures a good seal when installed properly. All bends are made to the exact specification of the OEM hose. This ensures that the hose will fit in the space provided and takes the course of the original OEM hose. Plews & Edelmann is a leading designer, manufacturer and distributor of a broad range of automotive parts, accessories, gadgets, and tools sold to the vast majority of mass merchant, retail auto parts stores and wholesale automotive parts and industrial distribution outlets worldwide.

Product Features:

• Superior temperature range performance ensures function at any temperature.
• Outstanding impulse durability increases longevity of the hose.
• Constructed to OEM form, fit, and function to ensure ease of installation and ongoing performance.