2009 Subaru Forester Power Steering Parts

Essential 2009 Subaru Forester Power Steering Parts

Carquest Premium – New Power Steering Pump (Part No.98-5196CQ)

New Power Steering Pump

from

$242.99
Our power steering pumps are manufactured with premium components to ensure longevity and reliability under all driving conditions. Each unit is supplied with high temperature seals and load-tested to ensure reliable performance.

Product Features:
  • Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
  • Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
  • Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
  • Meets or exceeds O.E. performance.
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-607)

Remanufactured Power Steering Pump

from

$257.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

PWR – New Power Steering Pump with Pulley (Part No.60-5372P)

New Power Steering Pump with Pulley

from

$374.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:
  • PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
  • All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
  • Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
  • Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
  • Enables you to achieve a more efficient, durable, and professional installation
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Whiteline – Steering Rack And Pinion Mount Bushing (Part No.KSR207)

Steering Rack And Pinion Mount Bushing

from

$92.99
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tyres have all put radically increased loading on the steering systems of modern cars. Add to that engine bay contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Steering Rack And Pinion Mount Bushing (Part No.KSR202)

Steering Rack And Pinion Mount Bushing

from

$57.99
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tyres have all put radically increased loading on the steering systems of modern cars. Add to that engine bay contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Rein – Power Steering Return Hose (Part No.PSH0501)

Power Steering Return Hose

from

$16.99
Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose with clamps
  • OE quality, braided rubber compound hose
  • Pre attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
  • Ensures proper operation of the power steering system
See More

Carquest Premium – Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" Beaded Tube (Part No.40276)

Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" Beaded Tube

from

$73.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
  • Heat/abrasion tubing protects vital areas
See More

Carquest Premium – Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" Beaded Tube (Part No.40455)

Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" Beaded Tube

from

$77.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
  • Heat/abrasion tubing protects vital areas
See More

Carquest Premium – Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" I.D. Hose (Part No.40452)

Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" I.D. Hose

from

$99.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Dorman – RACK BELLOW (Part No.541-525)

RACK BELLOW

from

$17.99
RACK BELLOW

Dorman – RACK BELLOW (Part No.541-524)

RACK BELLOW

from

$32.99
RACK BELLOW

EMPI – re Steering Rack Boot (Part No.M1010186453EMP)

re Steering Rack Boot

from

$17.94
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP26805)

Rack & Pinion Bellows

from

$62.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000406507MAV)

Complete Steering Rack, Remanufactured

from

$678.64
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Cardone New – New Rack and Pinion Assembly (Part No.97-2312)

New Rack and Pinion Assembly

from

$453.99
CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:
  • Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
  • Performance testing ensures perfect fit, function and reliable performance.
  • Computerized spool valve balancing ensures exceptional steering feel.
  • Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
  • Built to meet or exceed O.E.M. performance.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2300)

Remanufactured Rack and Pinion Assembly

from

$332.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000403622MAV)

Complete Steering Rack, Remanufactured

from

$686.84
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 14mm Female "O" Ring (Part No.40206)

Power Steering Pressure Hose, 14mm Banjo x 14mm Female "O" Ring

from

$199.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 14mm Female "O" Ring (Part No.40201)

Power Steering Pressure Hose, 14mm Banjo x 14mm Female "O" Ring

from

$247.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Female "O" Ring (Part No.40199)

Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Female "O" Ring

from

$167.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Restrictor helps absorb vibration and reduce noise
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

2009 Subaru Forester Power Steering Parts

Maybe you’re in the middle of a full rebuild of that 2009 Subaru Forester. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 35 different Power Steering Parts in our inventory ranging from $6.99 to $726.59. That means you can find the exact parts or products you need to keep that 2009 Subaru Forester running smoothly.

Power Steering Parts are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Subaru Forester. Imperial, Cardone, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Power Steering Parts for your 2009 Subaru Forester, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,353 reviews in this category, some of the top rated parts include Remanufactured Power Steering Pump with 1.0 stars.

So if you’re in the market for aftermarket Power Steering Parts to keep your 2009 Subaru Forester rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Power Steering Parts Brands To Make Your 2009 Subaru Forester Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Subaru Forester demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Forester the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.

Popular Cardone Power Steering Parts

We carry Cardone parts in our stock across Power Steering Filters categories, plus more. For a 2009 Subaru Forester, our most popular Cardone Power Steering Parts include:
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters
New Power Steering Filter
from $31.99
(59)
New Power Steering Filter
Power Steering Filters

Top 2009 Subaru Forester Power Steering Parts from Imperial

Imperial products are another trusted brand when it comes to Power Steering Parts for your 2009 Subaru Forester. Popular Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2009 Subaru Forester Power Steering Parts

What are the most purchased Power Steering Parts for the 2009 Subaru Forester?

Out of 35 Power Steering Parts for the 2009 Subaru Forester, the most popular in our inventory are:
New Power Steering Pump
from $242.99
This product is not rated
New Power Steering Pump
Power Steering Pumps
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
Power Steering Coolers
Power Steering Filter
from $31.99
This product is not rated
Power Steering Filter
Power Steering Filters

What are the top-rated 2009 Subaru Forester Power Steering Parts?

Top-rated Power Steering Parts for your 2009 Subaru Forester based on customer reviews/ratings are:
Remanufactured Power Steering Pump
from $278.99
(1)
Remanufactured Power Steering Pump
“Lasted a week and already replacing it again”