2009 Porsche Boxster Car Parts & Accessories

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Window Regulator

Window Regulator

Trunk Switch

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Fuel Door Actuator

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Stone Guard

Stone Guard

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Convertible Top Cabl

Fuel Tank Door Latch

Trim Fastener, Black

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
• Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
• Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
• High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
• Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Product Features:

• Brand may vary by location

The Bosch OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:

• OE quality direct fit application
• Manufactured to meet or exceed OE requirements and testing
• Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

• All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
• Produced by an Original Equipment supplier
• Matches Original Equipment design specifications
• Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
• High corrosion resistance

Input Shaft Seal

Differential Seal

LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.

The Sachs Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Durable release bearings with formed rings provide high load-carrying capacity in the minimum space, increasing clutch operation comfort and ensure a long operating life. The locating bore for the press-fit connection must be made before release bearings can be installed.

Product Features:

• Few installation parts
• Higher basic load rating
• Low space requirements

Clutch Lever

Clutch Pivot Pin

Autocraft Easy Fit Car Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:

• Lightweight, breathable, non-abrasive fabric
• Water repellent, protects against mold and mildew
• Full elastic hem with reinforced grommets
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

Autocraft Easy Fit Car Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:

• Medium weight, breathable, non-abrasive fabric
• Water repellent, protects against mold and mildew
• Full elastic hem with reinforced grommets
• Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Covercraft’s most luxurious indoor cover! Form-Fit fits like a glove and the sheared cotton fleece underside is the softest finish you can put on a vehicle for indoor storage. This high-performance fabric pampers your vehicle’s paint finish. Its highly breathable, preventing vapor and heat from becoming trapped under the cover. Fabric provides some protection against dents and dings.

Product Features:

• Exclusively designed for premium indoor coverage
• Our Softest, Most Luxurious Indoor Cover
• Special Stretch Fabric Follows Vehicle Contours
• Inside is 100% Cotton Sheared to a Fleece Finish
• Available in 6 colors – Storage Bag Included

Covercraft’s most luxurious indoor cover! Form-Fit fits like a glove and the sheared cotton fleece underside is the softest finish you can put on a vehicle for indoor storage. This high-performance fabric pampers your vehicle’s paint finish. Its highly breathable, preventing vapor and heat from becoming trapped under the cover. Fabric provides some protection against dents and dings.

Product Features:

• Exclusively designed for premium indoor coverage
• Our Softest, Most Luxurious Indoor Cover
• Special Stretch Fabric Follows Vehicle Contours
• Inside is 100% Cotton Sheared to a Fleece Finish
• Available in 6 colors – Storage Bag Included

Covercraft’s most luxurious indoor cover! Form-Fit fits like a glove and the sheared cotton fleece underside is the softest finish you can put on a vehicle for indoor storage. This high-performance fabric pampers your vehicle’s paint finish. Its highly breathable, preventing vapor and heat from becoming trapped under the cover. Fabric provides some protection against dents and dings.

Product Features:

• Exclusively designed for premium indoor coverage
• Our Softest, Most Luxurious Indoor Cover
• Special Stretch Fabric Follows Vehicle Contours
• Inside is 100% Cotton Sheared to a Fleece Finish
• Available in 6 colors – Storage Bag Included

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.