2009 Nissan Quest Air Conditioning Parts

More 2009 Nissan Quest Air Conditioning Parts

Find your specific 2009 Nissan Quest original or aftermarket Air Conditioning Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2009 Nissan Quest Air Conditioning Parts

Original Equipment – Original Equipment ABS Speed Sensor (Part No.N6030228147OEA)

Original Equipment ABS Speed Sensor

from

$184.12
The Original Equipment brand ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. The Original Equipment brand ABS speed sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More
View Product

KAI – A/C Discharge Hose (Part No.HOS010427)

A/C Discharge Hose

from

$30.99
New Standard Replacement A/C Refrigerant Discharge Hose

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Carquest Premium – AC Pressure Sensor (Part No.ABA1011)

AC Pressure Sensor

from

$114.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More
View Product

KAI – A/C System Seal Kit (Part No.FTT010021)

A/C System Seal Kit

from

$11.99
New Standard Replacement A/C System Seal Kit, MT2525, V6 Engine

Product Features:
  • MT2525, V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – A/C System Seal Kit (Part No.FTT010049)

A/C System Seal Kit

from

$21.99
New Standard Replacement A/C System Seal Kit, MT2571, L4 Engine

Product Features:
  • MT2571, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – A/C Compressor (Part No.ACP011477)

A/C Compressor

from

$454.99
New Standard Replacement A/C Compressor, 6 Groove, V6 Engine

Product Features:
  • 6 Groove, V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – A/C Compressor, Dks17D, 7 Groove (Part No.ACP012434)

A/C Compressor, Dks17D, 7 Groove

from

$474.99
New Standard Replacement A/C Compressor, DKS17D, 7 Groove

Product Features:
  • DKS17D, 7 Groove
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$9.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Cap & Valve A/C System Seal Kit

from

$17.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

(29 reviews)
View Product

KAI – A/C Condenser (Part No.CNDDPI3034)

A/C Condenser

from

$117.99
New Platinum Pro A/C Condenser, With Receiver Drier

Product Features:
  • With Receiver Drier, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6466)

A/C Condenser and Receiver Drier Assembly

from

$127.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More
View Product

Santech – A/C Pressure Switch (Part No.R1054409646SII)

A/C Pressure Switch

from

$60.39
A/C Pressure Switch
View Product

Motorcraft – A/C Pressure Switch (Part No.R1054836769MTR)

A/C Pressure Switch

from

$48.83
When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More
View Product

Santech – A/C Hose (Part No.R1020402888SII)

A/C Hose

from

$123.60
A/C Hose
View Product

Carquest Premium – A/C Accumulator With Hose (Part No.T83350)

A/C Accumulator With Hose

from

$53.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

(1 reviews)
View Product

Carquest Premium – A/C Discharge And Suction Line Hose Assembly (Part No.T56110)

A/C Discharge And Suction Line Hose Assembly

from

$119.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

(1 reviews)
View Product

KAI – A/C Expansion Valve, Rear, V6 Engine (Part No.ACX011344)

A/C Expansion Valve, Rear, V6 Engine

from

$35.99
New Standard Replacement A/C Expansion Valve, Rear, V6 Engine

Product Features:
  • Rear, V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Carquest Premium – A/C Liquid Line Hose Assembly w/ Serviceable Orifice Tube (Part No.T55148)

A/C Liquid Line Hose Assembly w/ Serviceable Orifice Tube

from

$111.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More
View Product

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34293)

Air Conditioning Bypass Pulley

from

$123.99
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More
View Product

Carquest Premium – A/C Accumulator w/ Hose (Part No.T33097)

A/C Accumulator w/ Hose

from

$41.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

(1 reviews)
View Product

Four Seasons – Four Seasons A/C Receiver Drier (Part No.R1040332998AIR)

Four Seasons A/C Receiver Drier

from

$42.01
The Four Seasons A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More
View Product

Metrix – Receiver Drier (Part No.R104089634MTX)

Receiver Drier

from

$71.61
METRIX receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moisture and helps protect the entire A/C system against corrosion. METRIX receiver driers features a lightweight aluminum assembly and provides an exact fit, just as an OE-quality part should.

Product Features:
  • OE-Quality – Exact Fit
  • Utilizes factory style fittings and connectors
  • Compatible with both R12 and R134A refrigerant
  • Manufactured using the highest quality components
See More
View Product

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T64053)

A/C Plate and Fin Evaporator

from

$103.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More
View Product

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54729)

A/C Plate and Fin Evaporator

from

$115.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More
View Product

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54728)

A/C Plate and Fin Evaporator

from

$102.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More
View Product

Carquest Standard – Reman Ford FS10 Compressor w/ Clutch (Part No.DW57139)

Reman Ford FS10 Compressor w/ Clutch

from

$169.99
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality stAndards in the Re-manufacturing process
See More

(1 reviews)
View Product

Metrix – A/C Compressor w/ Clutch, New (Part No.R1000565515MTX)

A/C Compressor w/ Clutch, New

from

$223.94
METRIX A/C compressors provide OE quality, high efficiency, and reliable performance, combined with superior features including an exact fit, higher pumping capacity and an advanced clutch design for longer life. All METRIX A/C compressors are 100% new and contain NO remanufactured parts. All compressors are equipped with a new clutch assembly, and include O-rings and installation instructions.

Product Features:
  • OE-Quality – Exact Fit
  • Low Power Demand
  • Guarantees OE quality performance, durability and fitment.
  • 100% Brand new with no remanufactured parts.
  • Equipped with a new clutch assembly.
  • Manufactured using the highest quality components
  • Meets or exceeds the manufacturers specifications for fit quality and durability.
See More

(1 reviews)
View Product

Carquest Premium – New Compressor (Part No.T158667)

New Compressor

from

$302.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.

Product Features:
  • Every unit is 100% function and leak tested
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Very low friction coating used on swash plate to improve durability
  • PTFE coated pistons improve performance and reduce wear
  • Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
  • Matched high-quality needle-roller bearing ensures low friction and high load capability
  • Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
See More
View Product

2009 Nissan Quest Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2009 Nissan Quest. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 37 different Air Conditioning Parts in our inventory ranging from $9.99 to $455.99. That means you can find the exact parts or products you need to keep that 2009 Nissan Quest running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Nissan Quest. Factory Air, Carquest, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2009 Nissan Quest, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 128 reviews in this category, some of the top rated parts include A/C Plate and Fin Evaporator with 3.0 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2009 Nissan Quest rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2009 Nissan Quest Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Nissan Quest demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Quest the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Factory Air Air Conditioning Parts

We carry Factory Air parts in our stock across AC Caps and Valve Core Kits categories, plus more. For a 2009 Nissan Quest, our most popular Factory Air Air Conditioning Parts include:
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Caps and Valve Core Kits

FAQs for 2009 Nissan Quest Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2009 Nissan Quest?

Out of 37 Air Conditioning Parts for the 2009 Nissan Quest, the most popular in our inventory are:
A/C Remanufactured; w/ Clutch; w/ DKS17D Compressor
from $293.99
(1)
A/C Remanufactured; w/ Clutch; w/ DKS17D Compressor
AC Compressor Without Clutch
A/C Service Valve
from $9.99
This product is not rated
A/C Service Valve
AC Caps and Valve Core Kits
A/C Block Type O-Ring Expansion Valve
from $43.99
(1)
A/C Block Type O-Ring Expansion Valve
Expansion Valve and Orifice Tubes

What are the top-rated 2009 Nissan Quest Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 2009 Nissan Quest based on customer reviews/ratings are:
A/C Plate and Fin Evaporator
from $104.99
(1)
A/C Plate and Fin Evaporator
“Part arrived on time and fit just fine”