from

$95.14

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$30.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$148.99

Product Features:

All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
High-efficiency turbine technology provides quiet and precise fuel delivery
Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel
CARQUEST fuel pump features external rubber feet for enhanced stability and reduced noise from vibration.
CARQUEST Fuel Pump has modified return porting to increase flow resulting in lower failure rates. Upgraded convoluted tubing improves durability to resist tube wear failure and create longer life.
CARQUEST strainer uses polyester material to ensure filtration performance meet or exceed OE requirements.

from

$28.99

All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:

Why Buy:
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance

from

$16.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$126.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$199.31

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Features and Highlights:

Product Features:

New and remanufactured available to help meet your customers’ needs
Units come ready to plug and play, with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades

from

$435.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Accurate Metering Control Even At Ultra-Low And High Duty Cycles

from

$8.61

Fuel Injector O-Ring

from

$39.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.79

This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$94.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$78.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$194.99

CARDONE Engineered Technology ensures that all CARDONE® New Mass Air Flow Sensors precisely track O.E. output curves and maintain strict tolerances to ensure accurate scan tool readings for proper operation. Every component is rated to handle a broad rang

Product Features:

All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
Guaranteed O.E. fit and function.

from

$69.99

Wire Assembly

from

$15.99

CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:

Precision stamped for perfect fit and pump position
Always replace lock ring as a part of fuel pump service

from

$296.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$35.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$0.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$36.27

Fuel Pump Relay

from

$91.71

Vapor Canister Vent

from

$51.32

Vapor Canister Vent

from

$75.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$56.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations