2009 Mercury Milan Transmission Parts

Essential 2009 Mercury Milan Transmission Parts

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$17.49
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNC1445)

Automatic Transmission Speed Sensor

from

$146.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0103)

Engine Coolant Temperature Sensor

from

$33.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

NOK – Input Shaft Seal (Part No.J1156126203NOK)

Input Shaft Seal

from

$4.27
Input Shaft Seal

National – Bearings (Part No.32008)

Bearings

from

$36.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Imperial – Transmission Line Fitting Kit (Part No.240394)

Transmission Line Fitting Kit

from

$32.49
Product Features:
  • Transmission line fitting kit
  • Ford; 1/2″-20 inverted flare, deep thread
  • Helps simplify transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
  • Crafted from high-quality material that makes it durable and longer-lasting
  • A high quality, direct fit OE replacement
  • Easily connects the transmission cooler line to the cooler hose
  • Hose clamps required
See More

SKF – AT Output Shaft Seal (Part No.J2557368289SKF)

AT Output Shaft Seal

from

$11.89
AT Output Shaft Seal

Dorman – Help – Transmission Shift Cable Repair (Part No.14908)

Transmission Shift Cable Repair

from

$16.99
When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.

Product Features:
  • Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles
  • Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
  • Application specific – made for certain Ford, Lincoln and Mercury vehicles
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

National – Multi Purpose Seal (Part No.710539)

Multi Purpose Seal

from

$26.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Anchor – Transmission Mount: Left, 1 Piece (Part No.3203)

Transmission Mount: Left, 1 Piece

from

$110.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 06-12; LINCOLN 06-06; MAZDA 09-13; MERCURY 06-11;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2006-2013
  • Weight approx: 4 Lbs
See More

ATP – AT CONTR SOLENOID (Part No.NE-37)

AT CONTR SOLENOID

from

$228.99
AT CONTR SOLENOID

NTK – ABS Wheel Speed Sensor (Part No.AB0199)

ABS Wheel Speed Sensor

from

$44.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
  • NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
  • The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.
See More

Driveworks – Auto Trans Torque Converter Seal (Part No.S-710539)

Auto Trans Torque Converter Seal

from

$16.29
Auto Trans Torque Converter Seal

National – Multi Purpose Seal (Part No.221207)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Motorcraft – Wire Assembly (Part No.WPT-118)

Wire Assembly

from

$36.99
Wire Assembly

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Auto Transmission Manual Shaft Seal

from

$4.79
Product Features:
  • Brand may vary by location
See More

ATP – Shift Solenoid (Part No.NE-25)

Shift Solenoid

from

$105.99
Shift Solenoid

National – Multi Purpose Seal (Part No.710396)

Multi Purpose Seal

from

$13.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Shift Pro by ETE – AWF21 Automatic Transmission Assembly (Part No.T163302)

AWF21 Automatic Transmission Assembly

from

$2905.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3216)

Torque Strut Motor Mount: Rear, 1 Piece

from

$68.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 10-12; MERCURY 10-11;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2010-2012
  • Weight approx: 2 Lbs
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

National – Multi Purpose Seal (Part No.710706)

Multi Purpose Seal

from

$18.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Compatible with most oils and EP lubricants at higher operating temperatures
  • High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
  • Temperature range: -20°F to 300°F; -29°C to 149°C
  • National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.
See More

National – Multi Purpose Seal (Part No.710709)

Multi Purpose Seal

from

$21.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design Type: Spring Loaded; Multi-Lip
  • Good abrasion and dry running capability
  • High swell in hydrocarbon fluids
  • Temperature range: -30°F to 325°F; -34°C to 163°C
  • Delivers reliable performance for every type of repair
See More

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-751)

Transmission Oil Cooler Line: Exact Fit, Metal

from

$47.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Transmission Oil Cooler Line (Part No.624-515)

Transmission Oil Cooler Line

from

$128.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.2007N)

Multi Purpose Seal

from

$13.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

2009 Mercury Milan Transmission Parts

You count on your 2009 Mercury Milan to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 56 Transmission Parts ranging in price from $3.49 to $2,905.99, you’re sure to find everything you need for your 2009 Mercury Milan.

Brands matter. If you want to shop a specific Transmission Parts brand, we stock 16 different brands like Imperial, Permatex, and Dorman. 2009 Mercury Milan Transmission Parts start as low as $3.49!

One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 544 extensive product reviews on 2009 Mercury Milan Transmission Parts. Some of the top-rated Transmission Parts products we carry are Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars and Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars.

Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 2009 Mercury Milan below to get started!

Top-Rated Transmission Parts Brands For Your 2009 Mercury Milan

Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Mercury Milan running right for years to come. In our inventory you’ll find brands like Imperial, Permatex, Dorman, and even more.

Popular Anchor Transmission Parts

You’ll find popular Anchor brand products across Transmission Mounts. All are waiting to get your 2009 Mercury Milan back on the road. Some of the top-rated Anchor products in these categories are:
Transmission Mount: Left, 1 Piece
from $110.99
(1)
Transmission Mount: Left, 1 Piece
Transmission Mounts

FAQs for 2009 Mercury Milan Transmission Parts

What are the most purchased Transmission Parts for the 2009 Mercury Milan?

Out of 56 Transmission Parts for the 2009 Mercury Milan, the most popular in our inventory are:
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from $26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
Transmission Oil Cooler Line: Exact Fit, Rubber
from $85.99
(3)
Transmission Oil Cooler Line: Exact Fit, Rubber
Transmission Oil Cooler Lines
Transmission Shift Cable Repair
from $16.99
This product is not rated
Transmission Shift Cable Repair
Automatic Transmission Shift Linkages

What are the top-rated 2009 Mercury Milan Transmission Parts?

Top-rated Transmission Parts for your 2009 Mercury Milan based on customer reviews/ratings are:
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
from $80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
Maxi-Kool® XL Transmission Oil Cooler
from $73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
High Performance Transmission Oil Cooler
from $85.99
(4)
High Performance Transmission Oil Cooler
“good quality,easy to install.”