2009 Jeep Wrangler Suspension Parts

This SES Suspension upgrade fits the front suspension of a Jeep Wrangler TJ, JK and JL. Each laser-cut piece of steel is precision welded and powder-coated to ensure a quality fit. We have engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs (weight from a snowplow or heavy aftermarket accessories ¿ such as a steel bumper) the harder they work to prevent front-end sag. This SES Suspension Upgrade replaces the jounce stop inside the coil spring. Its unique design ensures superb ride quality ¿ loaded or unloaded. (There should be a 0.5 Inch to 1 Inch gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Cushion Road Shocks
• Simple And Easy To Install

Once installed, this set of red bushings provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you n

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Bump Stop; Poly; Fro

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

• IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
• MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
• STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
• HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
• SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
• REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
• MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
• BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
• Rebound Bumper

Shock Kit

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

Skyjacker new lift systems for the NEW Jeep Wrangler JL and Rubicon feature DUAL RATE-LONG TRAVEL coil springs designed specifically for the JL to ensure superb highway ride quality and performance on any terrain – whether on-road or for off-road use. Choose your preference from either M95 Monotube or Black Max Front and Rear Long Travel shocks for proper suspension and ride control of the new Wrangler JL.

Product Features:

• The DUAL RATE-LONG TRAVEL Coil Springs Offers The Best Of Both Worlds From The Street To The Trail! The 1st Spring Rate Offers An Exceptional Highway Ride
• The Coils Will Expand When Off-Roading During Articulation As The Suspension Droops To Keep The Tires In Contact With The Ground Much Longer Than A Single Rate Coil
• This Results In A Smoother Ride While Maintaining The Coil In The Upper Coil Bucket Even At Full Droop
• The 2nd Rate (Lower Coils) Only Engage After Compression Past The 1st Rate, This Second Rate Allows Consistent Control And Stability During Body Roll And Heavy Off-Road Suspension Movement
• Systems Feature Extended Sway Bar End Links Which Allow For Full Droop And Long Travel As Well As Bump Stop Extensions To Make Sure The Suspension Clears The Tires At Bump
• Long Travel Front And Rear Shocks Are Length Fitted To Offer The Maximum Extension Allowable For Full Articulation To Complete This Total Package
• Lift Kit Suspension Include, Front And Rear Dual Rate, Long Travel Coil Springs: Front And Rear Extended Sway Bar End Links: Front And Rear Bump Stop Extensions
• Lift Kit Suspension Include, Front And Rear Black MAX Or M95 Monotube Long Travel Shocks: Grade 8 Mounting Hardware

Designed to improve the ride, Rancho® adjustable control arm kits are for a stock or lifted Jeep® Wrangler TJ/Cherokee XJ (up to 4-in.). Made of heavy tubing, they feature Rancho’s D2 maintenance-free bushings for reduced noise, vibration and harshness.

Product Features:

• COMPATIBILITY — Designed for stock and lifted (up to 4-in.) Jeep Wrangler TJ and Cherokee XJ
• MAINTENANCE-FREE BUSHINGS — Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
• IMPROVES RIDE — Reduces noise, vibration and harshness for improved ride quality
• ADJUSTABLE — Allows adjustment of caster and pinion angles
• RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
• ENGINEERED TO LAST — 1.25-In. OD diameter bar upper arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
• EASY TO INSTALL — Includes two preassembled control arms for easy installation

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Suspension Trailing Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

• Bushings included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance INSTALLATION NOTE: It is recommended by the manufacturer that trailing arms be replaced in pairs.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:

• 3/16 in. Thick Steel For Strength And Rigidity
• Maximum Corrosion Protection
• Counter Sunk Compressor
• Factory Attachment Points

This coil spring mount kit is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.

Product Features:

• Coil Spring Mount Kit
• Suspension Coil Spring Mount Kit
• This coil spring mount kit is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

LeafSpBumper

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. Features Rancho RS5000®X front and rear shocks that provide additional control and reduce body roll.

Product Features:

• ORDERING INFO — Box 2 of 2 for master kit RS66124BR5, must order RS66124BR5-1 and RS66124BR5-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS5000®X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• ENHANCED CONTROL — Rancho RS5000®X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.

Product Features:

• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.

Product Features:

• Twin Tube Construction
• Advanced Foam-Cell Technology
• Vehicle Specific Multi-Stage Valving
• Increased Fluid Capacity For MAX Heat Dissipation
• 360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
• Chrome Plated Shaft And Sintered Iron Piston
• Comes With Black Boot

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Designed to keep the control arms of your Jeep® Wrangler JK at factory angles, Rancho® rockGEAR® control arm geometry correction brackets deflect road harshness, reduce brake dive and allow for proper caster angle after adding an aftermarket lift kit.

Product Features:

• COMPATIBILITY — Fits Jeep Wrangler JK Unlimited and Rubicon models with 2-in. to 4-in. lift kits that utilize the factory upper and lower control arms
• MAINTAINS CASTER ANGLE — Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JK models
• EASY TO INSTALL — Bolt-on system for easy installation features four fixed adjustment locations for each height with option for additional caster
• RESISTS CORROSION — Durable black E-coat finish resists rust and corrosion
• ENGINEERED TO LAST — Made of high-strength, low-alloy steel for long life and dependability
• ONE-PIECE SOLUTION — One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction

Designed to keep the control arms of your Jeep® Wrangler JL at factory angles, Rancho® rockGEAR® control arm geometry correction brackets deflect road harshness, reduce brake dive and allow for proper caster angle after adding an aftermarket lift kit.

Product Features:

• COMPATIBILITY — Fits 2-door, 4-door Jeep Wrangler JL, non-Rubicon and Rubicon models with 2-in. to 4.5-in. lift kits that utilize the factory upper and lower control arms
• MAINTAINS CASTER ANGLE — Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JL models
• EASY TO INSTALL — Bolt-on system for easy installation features three fixed adjustment locations for each height with option for additional caster
• RESISTS CORROSION — Durable black E-coat finish resists rust and corrosion
• ENGINEERED TO LAST — Made of high-strength, low-alloy steel for long life and dependability
• ONE-PIECE SOLUTION — One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:

• Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
• Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
• Pre-installed bushings (when applicable) for easy installation
• Pre-installed bracket (where applicable) for a complete repair, saving time and labor.

The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.

Product Features:

• Versatile solution – the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
• Ensure fit – precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
• Durable materials – this adjustable control arm is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.

Product Features:

• Versatile solution – the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
• Ensure fit – precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
• Durable materials – this adjustable control arm is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience