2009 GMC Yukon XL 2500 Drivetrains
More 2009 GMC Yukon XL 2500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2009 GMC Yukon XL 2500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2009 GMC Yukon XL 2500 Drivetrains
Carquest – Four Wheel Drive Actuator Switch (Part No.FWD39)
from
$66.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Robust design and high grade materials meet the stringent demands of today’s service professional
- All of our switches are made to OE spec to ensure proper fit, form and function
Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)
from
$729.99
Product Features:
See More
- Standard open carrier case
- Fits GM 10.5″ 14 bolt truck
- 4.10 and down ratio only
- Does not include spider gears
Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)
from
$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 10.5″ 14 bolt truck
- 4.10 ratio and down only
- Clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Timken – Wheel Hub Assembly (Part No.K7001403708TIM)
from
$836.74
Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.
Product Features:
See More
Product Features:
- Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
- Features an advanced sensor and sensor technology for superb performance.
- Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
- Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
- Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
- Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
- Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
- Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.
Driveworks – Camshaft Seal (Part No.S-99139)
Yukon Gear – 9.5" GM C/Clip (Part No.33081)
Yukon Gear – Standard Open And Gov-Loc Cross Pin For 9.5" GM (Part No.33402)
from
$32.99
Standard open and Gov-Loc cross pin for 9.5″ GM.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 9.5″
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Driveworks – Axle Shaft Seal (Part No.S-710497)
ACDelco – Differential Bearing (Part No.J7060366581ACD)
from
$137.90
Differential Bearing
Yukon Gear – Thrust Washer For GM 9.25" IFS Stub Shaft (Part No.33525)
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Eaton Positraction Shim Kit For 9.5" GM (Part No.16059)
from
$47.99
Eaton positraction shim kit for 9.5″ GM.
Product Features:
See More
Product Features:
- Shim kit
- Fits GM 9.5″ Eaton positraction
Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)
from
$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)
from
$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 9.5″
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)
from
$287.99
Yukon mini spool for GM 10.5″ 14 bolt truck.
Product Features:
See More
Product Features:
- Fits 10.5″ GM 14 bolt truck
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R14RLAMKL)
from
$163.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- GM 14 BOLT 10.5 RING GEAR 98 & ON 456 AND UP
Yukon Gear – 1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS (’88-Newer) See Notes (Part No.21590)
from
$279.99
Yukon front lefft hand short side stub axle for GM 9.25″ IFS (’88 and newer). Yukon front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1988 and up GM 9.25″ IFS
- Left hand side
- 33 spline
USA Standard Gear – Master Overhaul Kit for the ’98 and Newer GM 10.5" 14T Differential (Part No.37046)
from
$405.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 10.5″ 14 bolt truck
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
USA Standard Gear – Master Overhaul Kit for ’97-’13 GM 9.5" Differential (Part No.37073)
from
$431.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
Yukon Gear – Bearing Race Driver (Part No.56012)
from
$215.99
Bearing race driver for rear GM 9.5″, 9.25″ IFS, and Ford 9″ HD. (TK HM804810). No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM804810 race
- All steel construction
Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)
from
$32.99
Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.
Product Features:
See More
Product Features:
- Side adjuster lock bolt
- Fits GM 7.2″ IFS and 9.25″ IFS
Yukon Gear – Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck (Part No.16113)
from
$78.99
Eaton positraction shim kit for GM 14T.
Product Features:
See More
Product Features:
- Shim kit
- Fits GM 10.5″ 14 bolt truck Eaton positraction
Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)
from
$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 10.5″ 14 bolt truck with Eaton positraction
- Carbon fiber clutches
Driveworks – Wheel Bearing (Part No.S-RP-1561-GM)
SKF – Wheel Bearing (Part No.K8000204410SKF)
from
$86.88
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
National – Bearings (Part No.B-2410)
from
$24.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 2009 GMC Yukon XL 2500 Drivetrains Categories
2009 GMC Yukon XL 2500 Drivetrains
You count on your 2009 GMC Yukon XL 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 323 Drivetrains ranging in price from $2.99 to $2,434.99, you’re sure to find everything you need for your 2009 GMC Yukon XL 2500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Valvoline, Moog, and Driveworks. 2009 GMC Yukon XL 2500 Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,522 extensive product reviews on 2009 GMC Yukon XL 2500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Greaseable Super Strength Universal Joint with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2009 GMC Yukon XL 2500 below to get started!
Top-Rated Drivetrains Brands For Your 2009 GMC Yukon XL 2500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 GMC Yukon XL 2500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular EVO Driveline Drivetrains
You’ll find popular EVO Driveline brand products across Transfer Cases. All are waiting to get your 2009 GMC Yukon XL 2500 back on the road. Some of the top-rated EVO Driveline products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2009 GMC Yukon XL 2500, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2009 GMC Yukon XL 2500 Drivetrains
What are the most purchased Drivetrains for the 2009 GMC Yukon XL 2500?
Out of 323 Drivetrains for the 2009 GMC Yukon XL 2500, the most popular in our inventory are:
What are the top-rated 2009 GMC Yukon XL 2500 Drivetrains?
Top-rated Drivetrains for your 2009 GMC Yukon XL 2500 based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
