2009 GMC Yukon Drivetrains
More 2009 GMC Yukon Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2009 GMC Yukon, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2009 GMC Yukon Drivetrains
Driveworks – Universal Joint (Part No.DW-331BL)
from
$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
National – Bearings (Part No.FC-66561)
from
$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)
Dorman – 4 Wheel Drive Actuator Pigtail (Part No.645-902)
from
$113.99
This 4WD actuator wiring harness directly replaces the original harness on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this four-wheel drive actuator pigtail matches the fit and function of the original equipment
- Effective fix – properly restores 4WD functionality after original harness fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Pro-King – Differential Cover Plug (Part No.742G484)
from
$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Bearings (Part No.B-2010)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
MOOG – Differential Carrier Bushing (Part No.K201736)
from
$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Returns like-new steering
- Long-lasting performance
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Belltech – Spindle Assembly, 2 Inch Drop, Iron, Set Of 2 (Part No.2508)
from
$433.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber
Product Features:
See More
Product Features:
- By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
- Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
- Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification
Dorman – Transfer Case Gasket (Part No.917-562)
from
$11.99
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
- Effective fix – restores a tight seal in the transfer case after original gasket fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
ACDelco – Pinion Seal (Part No.J7010211704ACD)
from
$40.45
Pinion Seal
Yukon Gear – GM 9.5" Rear Axle Bearing And Seal Kit (Part No.10003)
from
$108.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit for semi-floating GM 9.5″, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits GM applications
- Includes axle bearing and seal
- Services one side
- 2.985″ O.D.
- 1.700″ I.D.
Yukon Gear – Bearing Install Kit For ’09 And Newer GM 8.6" Differential (Part No.11105)
from
$326.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits 2009 and up GM 8.6″
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
Felpro – Differential Cover Gasket (Part No.RDS 55477)
from
$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)
from
$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
- Includes carrier bearings and races and “super” carrier shim kit
Yukon Gear – Standard Open Carrier Case For ’00-’06 GM 8.6" V2 Design (Part No.20096)
from
$281.99
Yukon standard open carrier case for ’00-’06 GM 8.6″, V2 – version 2 design.
Product Features:
See More
Product Features:
- Fits 2000-2006 GM 8.6″ with open differential
National – Bearings (Part No.HM804810)
from
$28.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Differential Pinion (Part No.13110)
from
$306.99
Differential Pinion
National – Multi Purpose Bearing (Part No.HB-206-FF)
from
$46.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
ACDelco – Vehicle Speed Sensor (Part No.19302667)
from
$59.99
ACDelco GM Original Equipment Vehicle Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
National – Shaft Repair Sleeve (Part No.99215)
from
$48.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today¿s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Differential Pinion Yoke Assembly (Part No.697-549)
from
$156.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Yoke For ’98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design (Part No.41070)
from
$407.99
Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Dorman – Remanufactured Transfer Case Control Module (Part No.599-108)
from
$371.99
Dorman’s remanufactured Transfer Case Control Module is engineered from new replacement parts And renewed parts for optimal performance. It provides a high-quality, environmentally friendly alternative to buying new.
Product Features:
See More
Product Features:
- Restores the ability to shift in and out of four-wheel drive (4WD)
- Shuts off four-wheel drive (4WD) warning light
- Plug and play for easy, economical installation, no programming required
- Fully remanufactured and vehicle simulator- tested for quality assurance
Dorman – Remanufactured Transfer Case Control Module (Part No.599-105)
from
$341.99
Transfer case control module no longer in control? Restore it cost-effectively with this replacement module that provides the same function and performance of the original on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case control module directly replaces the original equipment modules on certain vehicle years, makes and models
- Effective fix – replacement restores transfer case motor control and addresses trouble codes
- Thoroughly tested – each module undergoes rigorous testing to ensure reliable performance
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)
from
$52.99
Product Features:
See More
- Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
- Interlocking design makes installation much easier
EVO Driveline – Transfer Case Assembly (Part No.UMT140M)
from
$1723.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
EVO Driveline – Remanufactured Transfer Case (Part No.UMT128)
from
$1177.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
EVO Driveline – Transfer Case Assembly, Without Motor (Part No.UMT140)
from
$1754.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
Popular 2009 GMC Yukon Drivetrains Categories
2009 GMC Yukon Drivetrains
You count on your 2009 GMC Yukon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 436 Drivetrains ranging in price from $1.99 to $2,424.99, you’re sure to find everything you need for your 2009 GMC Yukon.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 27 different brands like Moog, Dorman, and Carquest Premium. 2009 GMC Yukon Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,236 extensive product reviews on 2009 GMC Yukon Drivetrains. Some of the top-rated Drivetrains products we carry are 4WD Actuator, Front Axle with 4.5 stars and Multi Purpose Seal with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2009 GMC Yukon below to get started!
Top-Rated Drivetrains Brands For Your 2009 GMC Yukon
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 GMC Yukon running right for years to come. In our inventory you’ll find brands like Moog, Dorman, Carquest Premium, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 2009 GMC Yukon back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2009 GMC Yukon, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2009 GMC Yukon Drivetrains
What are the most purchased Drivetrains for the 2009 GMC Yukon?
Out of 436 Drivetrains for the 2009 GMC Yukon, the most popular in our inventory are:
What are the top-rated 2009 GMC Yukon Drivetrains?
Top-rated Drivetrains for your 2009 GMC Yukon based on customer reviews/ratings are:
