2009 GMC Envoy Fuel and Emissions Systems

Essential 2009 GMC Envoy Fuel and Emissions Systems

GM Genuine Parts – Secondary Air Injection Pump Cover Gasket (Part No.219-351)

Secondary Air Injection Pump Cover Gasket

from

$15.99
GM Genuine Parts Secondary Air Injection Pump Check Valve Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help form a gas-tight seal between the check valve and secondary air components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps maintain controlled air flow to proper air injection components
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)

Fuel Pump O-Ring

from

$12.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Fuel Pressure Relief Valve Cap

from

$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Bosch – Oxygen Sensor: 4 Wire, 14.96" Long, Heated, Exact Fit (Part No.15282)

Oxygen Sensor: 4 Wire, 14.96" Long, Heated, Exact Fit

from

$101.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.  Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product. 

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1001)

Vapor Canister Purge Solenoid

from

$36.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – MAP Sensor (Part No.31429)

MAP Sensor

from

$89.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1537)

Ambient Air Temperature Sensor

from

$10.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Oxygen Sensor Pigtail (Part No.645-668)

Oxygen Sensor Pigtail

from

$62.99
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

APA/URO Parts – Fuel Pump Tank Seal (Part No.E3004134881APA)

Fuel Pump Tank Seal

from

$13.80
Fuel Pump Tank Seal

Delphi – Mass Air Flow Sensor (Part No.AF10142)

Mass Air Flow Sensor

from

$127.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

Dorman – Secondary Air Injection Pump (Part No.306-012)

Secondary Air Injection Pump

from

$211.99
This secondary air injection pump is designed to match the fit and function of the original pump on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this secondary air injection pump is designed to match the fit and function of the original pump on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to internal component failure
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – 5-Way Female Gray Multi-Purpose Pigtail (Part No.PT1154)

5-Way Female Gray Multi-Purpose Pigtail

from

$45.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Secondary Air Injection Check Valve (Part No.911-003)

Secondary Air Injection Check Valve

from

$124.99
This secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles
  • Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1003)

Fuel Tank Pressure Sensor

from

$46.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61337)

Fuel Injection Throttle Body Mounting Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Delphi – Wide Range Oxygen Sensor (Part No.C5010205438DEL)

Wide Range Oxygen Sensor

from

$75.99
The Delphi Wide Range Oxygen Sensor is an integral component in the engine management system, helping provide accurate engine control and system diagnostics. It measures the air-fuel ratio of exhaust gases over a wide lambda range. Its five-wire, two-cell design enables higher signal resolution with greater accuracy. An integrated heater and alumina-zirconia element facilitate a fast light-off, allowing earlier closed-loop operation compared to conventional conical oxygen sensors. Designed to accommodate a variety of fuel applications, the poison-resistant coating of the Delphi Wide Range Oxygen Sensor helps improve accuracy and durability in harsh exhaust environments, while minimizing deterioration of the sensor characteristics over time. Its uniquely designed planar element technology and integral heater enhance resistance to thermal shock and help the sensor achieve fast light-off to help manufacturers meet current and more stringent future emissions regulations. The sensor’s greater accuracy and a fast transient response time help provide greater engine control, and help improve fuel economy and drivability.

Product Features:
  • High signal resolution and low pressure sensitivity help provide precise engine control
  • Integral heater enables faster light-off for earlier closed-loop operation
  • Unique planar element design enhances thermal shock resistance
  • Fast response helps improve fuel economy
See More

GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)

Fuel Injector Retainer Kit with Clip

from

$13.79
GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)

Fuel Tank Lock Ring (Right)

from

$12.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Help align and secure fuel tank sender
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.ECC1145)

Secondary Air Injection Pump Check Valve

from

$274.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

WSO – Fuel Tank Sending Unit (Part No.E2030455448WSO)

Fuel Tank Sending Unit

from

$69.54
The WSO Fuel Tank Sending Unit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications for fit, form, and function
See More

ACDelco – GM Original Equipment Fuel Injector Assembly for Reliable Performance (Part No.C1000580844ACD)

GM Original Equipment Fuel Injector Assembly for Reliable Performance

from

$167.24
The ACDelco GM Original Equipment Fuel Injector is a GM-recommended replacement for your vehicle’s original component. The Fuel Injector is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This original equipment fuel injector has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Multi Purpose Relay (Part No.83A1003)

Multi Purpose Relay

from

$20.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

ACDelco – GM Original Equipment Fuel Injector Seal Kit (Part No.C1060205441ACD)

GM Original Equipment Fuel Injector Seal Kit

from

$28.49
The ACDelco GM Original Equipment Fuel Injector Seal Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70914)

EGR/EXHAUST AIR SUPPLY GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

GM Genuine Parts – Fuel Feed and Vapor Pipe (Part No.25829656)

Fuel Feed and Vapor Pipe

from

$131.99
GM Genuine Parts Fuel Line Sets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Universal Fuel Line Retainer – 5/8 In. (Part No.800-041)

Universal Fuel Line Retainer - 5/8 In.

from

$12.29
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Level Sensor (Part No.KBE1051)

Fuel Level Sensor

from

$199.99
Fuel Level Sensor

2009 GMC Envoy Fuel and Emissions Systems

You count on your 2009 GMC Envoy to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 120 Fuel and Emissions Systems ranging in price from $1.79 to $394.99, you’re sure to find everything you need for your 2009 GMC Envoy.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 19 different brands like Carquest Premium, Felpro, and Bosch. 2009 GMC Envoy Fuel and Emissions Systems start as low as $1.79!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 928 extensive product reviews on 2009 GMC Envoy Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: Upstream, 4 Wire, 18.90" Long, Heated, Exact Fit with 4.7 stars and Air Flow Sensor – New Actual OE Part with 5.0 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2009 GMC Envoy below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2009 GMC Envoy

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 GMC Envoy running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Bosch, and even more.

Popular Delphi Fuel and Emissions Systems

You’ll find popular Delphi brand products across Fuel Injectors. All are waiting to get your 2009 GMC Envoy back on the road. Some of the top-rated Delphi products in these categories are:
Mass Air Flow Sensor
from $129.99
(21)
Mass Air Flow Sensor
Air Flow Meters and Mass Air

FAQs for 2009 GMC Envoy Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2009 GMC Envoy?

Out of 120 Fuel and Emissions Systems for the 2009 GMC Envoy, the most popular in our inventory are:
Mass Air Flow Sensor (MAF) - 100% NEW
from $89.99
(2)
Mass Air Flow Sensor (MAF) – 100% NEW
Air Flow Meters and Mass Air

What are the top-rated 2009 GMC Envoy Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2009 GMC Envoy based on customer reviews/ratings are:
Oxygen Sensor: Upstream, 4 Wire, 18.90" Long, Heated, Exact Fit
from $67.99
(21)
Oxygen Sensor: Upstream, 4 Wire, 18.90" Long, Heated, Exact Fit
“Part was perfect”
Air Flow Sensor - New Actual OE Part
from $56.99
(14)
Air Flow Sensor – New Actual OE Part
“great product”
Tethered Locking Fuel Cap: 10509, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
from $30.49
(8)
Tethered Locking Fuel Cap: 10509, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“Fix real easy good customer service”