2009 Ford Mustang Performance and Racing Products
Find Your Specific 2009 Ford Mustang Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2009 Mustang. Advance Auto Parts has popular Mustang parts like Performance Engines, Performance Suspension Products, Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2009 Ford Mustang Performance and Racing Products below and start saving instantly.
Popular 2009 Ford Mustang Performance and Racing Products Categories
Essential Performance and Racing Products for 2009 Ford Mustangs
Energy Suspension – Control Arm Bushing Set (Part No.4.3155R)
from
$175.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Sway Bar Bushing Set (Part No.4.5161R)
from
$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Dynomax – Exhaust Pipe (Part No.53702)
from
$176.99
Made from quality materials for durability, DynoMax direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with DynoMax pipe
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Competition Cams – Magnum 2230/230 Hydraulic Flat Cam (Part No.33-230-4)
from
$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)
from
$399.99
The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.
Product Features:
See More
Product Features:
- Optimized engine tuning
- Adjustable rev limiter/speed limiter
- Speedometer correction for multiple tire sizes and gear ration changes
- Adjustable shift firmness and shift points
- Throttle adjustments
- Cooling fan on/off temperatures
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
Russell – Street Legal, Mustang (Fronts Only) (Part No.693150)
from
$104.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Richmond Gear – RngPnn (Part No.F9620)
from
$185.99
RngPnn
Dynomax – Ultra Flo Exhaust Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 3.5" Out, Oval (Part No.17572)
from
$274.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Differential Cover Kit (Part No.9893G)
from
$89.99
Made from heavy gauge steel, this chrome plated rear end cover comes complete with bolts and gaskets.
Product Features:
See More
Product Features:
- Chrome plated steel for looks
- Includes bolts and gasket
Energy Suspension – M/TShftBshngKt (Part No.4.1134G)
from
$23.79
M/TShftBshngKt
Energy Suspension – Shifter Bushing Set (Part No.4.1131R)
Energy Suspension – Sway Bar Bushing Set (Part No.4.5167R)
from
$35.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.4.5163R)
from
$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Richmond Gear – MiniSpool (Part No.78-8831-1)
from
$151.99
MiniSpool
K&N – Cold Air Intake: Adds Up To 5 Horsepower, With Washable Air Filter (Part No.69-3525TS)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 57 Horsepower, With Washable Air Filter (Part No.57-2571)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
MagnaFlow – Direct-Fit Metallic Grade Federal / EPA Compliant Catalytic Converter (Part No.15448)
from
$882.99
Keep the check engine light off with MagnaFlow Metallic Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 15448. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2005-2009 Ford Mustang 4.6L. MagnaFlow 15448 includes (2) 2.5in. Band Clamps and interchanges with OE parts 7R3Z-5F250-A, 8R3Z-5F250-D, 9R3Z-5F250-A, AR3Z-5F250-A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Flowmaster Inc. – Header-back System – Dual Rear Exit – American Thunder – Moderate Sound (Part No.17273)
from
$972.99
For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More
MagnaFlow – Competition Series Exhaust System Kit (Part No.15677)
from
$919.99
The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited warranty. Please check to ensure compliance with local noise regulations.
Product Features:
See More
Product Features:
- Increased horsepower and torque
- Aggressive exterior sound
- Crafted from 409 stainless steel with all mandrel-bent tubing
K&N – Cold Air Intake: Adds Up To 16 Horsepower, With Washable Air Filter (Part No.69-3540TP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9923)
from
$212.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12102-P)
from
$399.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Uses 360 deg. Radial Flow Air Filter
- 20% cfm Flow Gain
- Improved Throttle Response
Energy Suspension – Control Arm Bushing Set (Part No.4.3161R)
from
$104.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Maintain Proper Caster Alignment
Energy Suspension – Control Arm Bushing Set (Part No.4.3162G)
from
$114.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.4.3161G)
from
$104.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Maintain Proper Caster Alignment
Upgrade your 2009 Ford Mustang with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2009 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Performance and Racing Products for the 2009 Ford Mustang, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Suspension Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2009 Ford Mustang at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $18.29 to $2,367.00, with
an average price of $399.58.
Our 62 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 2009 Ford Mustang without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2009 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names
like SCT Performance, K&N, Flowmaster Inc., and more.
SCT Performance Performance and Racing Products
start at just $399.99 and boast an impressive 5.0 stars average rating from customers.
K&N and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $137.99, and at an average 4.8 stars rating.
With 48 customer reviews and counting, our 2009 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2009 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place.
Start shopping confidently below for your 2009 Ford Mustang!
Best-Selling Performance Engines for 2009 Ford Mustangs
Enhance the driving experience in your Ford with 12 quality Performance Engine components, starting at $28.99.
Competition Cams – XERSC 222/224 FORD4V (Part No.106260)
from
$2367.00
XERSC 222/224 FORD4V
Competition Cams – XRPM 218/218MOD4V (Part No.106060)
from
$2367.00
XRPM 218/218MOD4V
Competition Cams – XFI 214/231FORDMOD3V (Part No.127150)
from
$1277.00
XFI 214/231FORDMOD3V
Competition Cams – XFI 245/256FORDMOD3V (Part No.127650)
from
$1277.00
XFI 245/256FORDMOD3V
Competition Cams – XE256PH-12 (Part No.127400)
from
$1230.00
XE256PH-12
Competition Cams – XFI 222/239FORDMOD3V (Part No.127350)
from
$1230.00
XFI 222/239FORDMOD3V
Competition Cams – MT234/254FORDMOD 3-V (Part No.127020)
from
$1205.00
MT234/254FORDMOD 3-V
Competition Cams – XFI 222/235FORDMOD3V (Part No.127300)
from
$1161.00
XFI 222/235FORDMOD3V
Competition Cams – XFI 214/227FORDMOD3V (Part No.127100)
from
$1152.00
XFI 214/227FORDMOD3V
Competition Cams – 32 Springs (Part No.26123-32)
from
$933.99
32 Springs
Competition Cams – 16 Springs (Part No.26123-16)
from
$309.99
16 Springs
Competition Cams – 1 Spring (Part No.26125-1)
from
$28.99
1 Spring
Most Popular 2009 Ford Mustang Performance Suspension Products
Customize your Ford with 3 Performance Suspension Products products
like Performance Lower Control Arm Bushings and
Performance Upper Performance Control Arm Bushings, all
priced under $109.99.
Energy Suspension – CntrlArmBshngKt (Part No.4.3165R)
from
$109.99
CntrlArmBshngKt
Energy Suspension – CntrlArmBshngKt (Part No.4.3165G)
from
$109.99
CntrlArmBshngKt
Energy Suspension – Control Arm Bushing Set (Part No.4.3167R)
from
$96.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into Stock Control Arms
Top Picks for 2009 Ford Mustang Performance Air Intake Kits
Upgrade Ford Mustangs with top-quality Performance Air Intake Kits parts, including 10 OEM and aftermarket selections for your 2009 model.
Spectre – Spectre Air Intake Kit (Part No.9924)
from
$215.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.69-3522TP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.69-3523KP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 57 Horsepower, With Washable Air Filter (Part No.57-2571)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Washable Air Filter (Part No.63-2565)
from
$419.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.57-2566)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9926)
from
$216.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
Edelbrock – Competition Air Intake Kit #15808 For 05-09 Mustang GT (Part No.15808)
from
$676.99
Edelbrock Part #15808 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2005-09 Mustang GT racing applications. It includes a high flow Mass airflow Sensor, 7.85in. long reusable open element filter, plastic shroud and all nec
Product Features:
See More
Product Features:
- Red Filter Color
- Cotton Gauze Filter Material
- Cone Filter Shape
- 7.85 Overall Length
- 95mm Housing Diameter
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-11312)
from
$376.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- 91% cfm Flow Gain
- Improved Throttle Response
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11312)
from
$365.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 100% cfm Flow Gain
- Improved Throttle Response
In-Demand Performance Exhaust Products for 2009 Ford Mustangs
Select from 11 premium Performance Exhaust Products parts for your 2009 Ford Mustang, with prices ranging from $135.99 to $994.99.
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
MagnaFlow – Direct-Fit Metallic Grade Federal / EPA Compliant Catalytic Converter (Part No.15448)
from
$882.99
Keep the check engine light off with MagnaFlow Metallic Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 15448. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2005-2009 Ford Mustang 4.6L. MagnaFlow 15448 includes (2) 2.5in. Band Clamps and interchanges with OE parts 7R3Z-5F250-A, 8R3Z-5F250-D, 9R3Z-5F250-A, AR3Z-5F250-A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)
from
$135.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Axle-back System – Dual Rear Exit – American Thunder – Moderate Sound (Part No.17410)
from
$699.99
This moderate sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maximum performance and includes specially selected mufflers to support the performance image of the car. As a Force II system, it delivers a moderate exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system includes all necessary parts and hardware for easy installation.
See More
Dynomax – Ultra Flo Exhaust Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 3.5" Out, Oval (Part No.17572)
from
$274.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Exhaust Pipe (Part No.53702)
from
$176.99
Made from quality materials for durability, DynoMax direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with DynoMax pipe
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)
from
$245.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15881)
from
$994.99
The MagnaFlow 2005-2009 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.4L 2005-2009 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15881 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15881 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
Flowmaster Inc. – Axle-back System – Single Rear Exit – American Thunder – Moderate Sound (Part No.17421)
from
$459.99
This aggressive sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maximum performance and includes specially selected mufflers to support the performance image of the car. As an America Thunder system, it delivers an aggressive exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system includes all necessary parts and hardware for easy installation.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942443)
from
$159.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Most Sold 2009 Ford Mustang Performance Steering Products
Explore our best-selling Ford parts for the 2009 Mustang among 2 OEM and aftermarket options starting from $21.49.
Energy Suspension – Sway Bar Bushing Set (Part No.4.5191G)
from
$43.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.4.5193G)
from
$21.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Top-Rated Performance and Racing Products Brands For Your 2009 Ford Mustang
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2009 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, K&N, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 2009 Mustang start at just $137.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular SCT Performance 2009 Ford Mustang Performance and Racing Products
When it comes to maintaining or upgrading your 2009 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 2009 Ford Mustang. With over 1 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$399.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”
Popular K&N 2009 Ford Mustang Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2009 Ford Mustang owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 2009 Mustang, Advance Auto Parts carries a full inventory of 3 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range from $367.99 to $419.99, plus, with more than 7 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$419.99
(3)
Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter
“I bought the 69 series Typhoon Proformance Intake Kit for my 2006 Mustang V6 have noticed faster throttle response and more horse power not to leave o”
from
$367.99
(3)
Cold Air Intake: Adds Up To 57 Horsepower, With Washable Air Filter
“I have cold air intakes on my 2004 F-350 and my 2008 GT500 Mustang and they work just great and were the best price around for these type of items. I ”
FAQs for 2009 Ford Mustang Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2009 Ford Mustangs?
Out of 62 Performance and Racing Products that fit 2009 Ford Mustangs, the following parts are the top sellers:
- Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
- Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99
What’s the price range for 2009 Ford Mustang Performance and Racing Products?
Performance and Racing Product prices for the 2009 Ford Mustang start at $18.29 and go up to $2,367.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2009 Ford Mustang?
The average price for Performance and Racing Products for the 2009 Ford Mustang is $399.58. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?
What are the cheapest Performance and Racing Products for my 2009 Ford Mustang?
The cheapest 2009 Ford Mustang Performance and Racing Products we carry in stock are:
- Shifter Bushing Set (22908316) – $18.29
- Shifter Bushing Set (22908315) – $18.29
- Sway Bar Bushing Set (22908745) – $21.49
- 1 Spring (50287844) – $28.99
- Sway Bar Bushing Set (22908749) – $43.49
What are the top-rated Performance and Racing Products that fit the 2009 Ford Mustang?
Out of 48 reviews by customers, our 2009 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2009 Ford Mustang and their top-rated products:
- Programmers
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
- Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
- 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (99991313) – $469.99
- Performance Air Intake Kits
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
- Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
- 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (99991313) – $469.99
What types of Performance and Racing Products do you sell for my 2009 Ford Mustang?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2009 Ford Mustang:
Can I get help with 2009 Ford Mustang Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford Mustang Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
