2009 Ford F-350 Super Duty Fuel and Emissions Systems

Name: Intake Air Temperature Sensor
Brand: Carquest Premium
SKU: AC20812
Price: 35.99 USD

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2009 F-350 Super Duty. Advance Auto Parts has popular F-350 Super Duty parts like Fuel Injectors, Fuel Pumps, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other F-350 Super Duty model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2009 Ford F-350 Super Duty Fuel and Emissions Systems below and start saving instantly.

Popular 2009 Ford F-350 Super Duty Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Gas Caps

Vacuum Pumps

Diesel Particulate Filters

Vapor Canister Vent Solenoids

Fuel Lift Pumps

Fuel Injector Sleeves

Fuel Injection Pumps

Fuel Injection Pressure Sensors

Manifold Air Pressure Sensors

Canister Purge Solenoids

Diesel Oxidation Catalysts

Fuel Tank Pressure Sensors

Water In Fuel Sensors

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

EGR Lines

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Tank Vent Valves

Fuel Injection Nozzle O-Rings

Mass Air Flow Sensor Connectors

Fuel Tank Selector Valves

Fuel Injector Harness

Fuel Pump Tank Seals

EGR Cooler Temperature Sensors

Oxygen Sensor Connectors

Idle Air Control Valve Connectors

EGR Tubes

EGR Valve Gaskets

Fuel Pump Driver Module Connectors

Vapor Canister Purge Solenoid Connectors

EGR Valve Temperature Sensors

EGR Vacuum Regulator Solenoid Connectors

Fuel Cap Tester Adapters

EGR Tube Kits

EGR Valve Adapters

Essential Fuel and Emissions Systems for 2009 Ford F-350 Super Duties

from

$35.99

An essential component in the diesel electronic control system, this sensor provides the vehicle powertrain control module (PCM) with Intake Air Temperature (IAT). The PCM uses this to calculate accurate fuel injection quantity. Failure of this component can result in a check engine light, poor drivability and excessive exhaust emissions.

Product Features:

Original equipment fit, form and function
Direct OE replacement

from

$169.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$31.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$1959.99

This diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to clogging
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$106.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$184.99

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles
Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$102.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness
Recommend to use OTC 6500 Flexihead O2 Sensor Wrench

from

$469.99

No Core Charge! No Core Exchange!: aFe Power is proud to introduce the round body direct replacement EGR Cooler for 2003-2004 V8-6.0L (td) Ford Power Stroke trucks. This EGR Cooler is a 100% new unit, not remanufactured. The cooler utilizes a thicker wall to extend life and resist failure. The unit is TIG welded and pressure tested at the factory. aFe simplifies the buying experience by not requiring a core charge nor a core exchange fee. New Construction: aFe EGR coolers are constructed from new stainless steel components. All connections are welded not brazed, for reliability. Direct-Flow Design: Thicker wall tubes resist clogging, resulting in extended life of the cooler. The heat exchanger tube wall thickness is more than twice as thick as the OE unit. Emissions Disclaimer: This product does not require a CARB EO#.

Product Features:

Improved Direct-Flow Design Prevents Failures
All New Construction; Not A Repaired/Refurbished Unit
All Connections Are Welded Not Brazed
Pressure Tested

from

$144.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$309.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$44.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

This fuel injector sleeve is a direct replacement for an original equipment part. Made of quality materials, this part has undergone try-on testing to ensure a quality fit and a long service life.

Product Features:

Ideal replacement – this fuel injector sleeve is a direct replacement for the original equipment part on specified engines
Durable construction – this part is made from quality materials to resist damage from fuel and extreme temperatures
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$169.99

This replacement water-in-fuel (WiF) sensor matches the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:

Ideal replacement – this water-in-fuel (WiF) sensor matches the original equipment sensor’s function and performance
Durable construction – this sensor is made of durable materials to withstand exposure to diesel fuel
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone vehicle try-on and bench testing to ensure a quality fit and long service life

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$294.99

The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Includes eight premium fuel injectors
Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$85.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$64.99

Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:

Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
Meets or exceeds all OEM specifications

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$42.99

This fuel pump driver module connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$56.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$29.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time

from

$112.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Designed with OE electrical connectors ensuring proper fits.
Application-specific, one-size-fits-all design.

from

$962.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$1614.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$62.99

Make better electrical repairs and accessory installations with a Dorman pigtail connector. This idle air control valve connector is designed to match performance of the original equipment connector on specified vehicles. Engineered for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.

Product Features:

Direct replacement – this idle air control valve connector is designed to match performance of the original equipment connector on specified vehicles
Ensure fit – check the product details to choose the best product for your needs
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$76.99

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$76.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Upgrade your 2009 Ford F-350 Super Duty with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2009 Ford F-350 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F-350 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 152 Fuel and Emissions Systems for the 2009 Ford F-350 Super Duty, designed to meet your needs without breaking the bank. From Fuel Injector replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2009 Ford F-350 Super Duty at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $3.49 to $2,098.99, with an average price of $167.98. Our 152 Fuel and Emissions Systems in stock come from 19 trusted brands, so you’re sure to find the right part for your 2009 Ford F-350 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2009 Ford F-350 Super Duty, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, DENSO, Dorman, and more. Bosch Fuel and Emissions Systems start at just $50.99 and boast an impressive 4.7 stars average rating from customers. DENSO and Dorman also bring quality to the table, with Fuel and Emissions Systems available starting at $59.99, and at an average 4.6 stars rating. With 6,384 customer reviews and counting, our 2009 Ford F-350 Super Duty Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2009 Ford F-350 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-350 Super Duty in top shape, all in one place. Start shopping confidently below for your 2009 Ford F-350 Super Duty!

Best-Selling Fuel Injectors for 2009 Ford F-350 Super Duties

Enhance the driving experience in your Ford with 33 quality Fuel Injector components, starting at $3.49.

show more show less

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$89.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$75.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$91.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$8.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$9.99

Premium OE quality materials
Services one injector

from

$50.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

from

$271.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters
Includes new fuel line which requires replacement any time line is removed
Includes all new premium quality O-rings and seals
Includes stainless-steel combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$56.99

Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:

Guaranteed OE fit, form and function
Manufactured of the highest quality materials
Provides precision flow and original spray pattern for optimal performance
Product includes top and bottom mounting o-ring
Maintains new-car smoothness and drivability

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$269.99

This fuel cooler is designed to match the fit and function of the original cooler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel cooler is designed to match the fit and function of the original cooler on specified vehicles
Restores functionality – reliable replacement for an original cooler that has failed due to collision, road debris or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$21.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$22.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$627.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100 percent to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance.

from

$573.99

KIT – INJECTOR

from

$294.99

This common rail diesel fuel injector has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:

Ideal replacement – this remanufactured common rail diesel fuel injector restores lost performance from a fouled original equipment injector
Thoroughly remanufactured – this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$261.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$259.99

This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:

Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
Plug and play installation – made with factory-style connectors for quick, reliable installation
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$246.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$208.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$182.99

MASS AIR FLOW SENSOR

from

$159.99

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

Most Popular 2009 Ford F-350 Super Duty Fuel Pumps

Customize your Ford with 18 Fuel Pumps products like Fuel Pumps, Fuel Pump Driver Modules, and Fuel Lift Pumps, all priced under $1,884.99.

show more show less

from

$121.99

The original equipment fuel pump driver module on millions of Ford, Lincoln, Mazda and Mercury vehicles often corrodes and fails over time due to its design and location. The module’s mounted to the frame, exposing it to road debris and making it hard to clean, and its die cast housing is susceptible to corrosion. This Dorman OE FIX replacement has a powder-coated housing to help increase longevity, and features newly designed rubber bushings to position the module off the frame, so that it doesn’t touch the dissimilar metal or accumulate debris underneath. As a bonus, inside is a reengineered microprocessor for improved response times. The module was designed and engineered in the United States, and fully assembled and tested at our advanced electronics facility in Lewisberry, Pennsylvania. Don’t replace your module with one that could fail the same way again, and don’t be fooled by lower-quality knock-offs of this improved design. Choose the Dorman OE FIX solution to truly fix your problem.

Product Features:

Upgraded components – this fuel pump driver module replaces the original equipment part with an improved microprocessor for better response time
Greater durability – powder-coated housing resists corrosion, and bushings position module away from steel frame for increased protection
Trustworthy quality – designed and engineered in the USA, and fully assembled and tested at our advanced electronics facility in Lewisberry, Pennsylvania
Hardware included – two sets of new fasteners included for a complete and reliable installation

from

$136.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Note: Strainer may be included, depending upon application.

from

$41.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$399.99

Motorcraft Pump Assemblies are engineered to Original Equipment standards, including the latest design improvements introduced since the vehicle’s year of manufacture.

Product Features:

Each assembly undergoes a stringent battery of tests that include tests for leaks, flow performance, vibration, corrosion resistance and durability, electrostatic discharge and mounting strength.
Each design is tested to Ford’s strict performance and durability standards that include Key Life testing to the equivalent of 10-years/150,000 miles.

from

$255.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$548.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$313.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$42.99

Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$472.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$296.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$64.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$1884.99

CARQUEST premium remanufactured high-pressure fuel pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes complete OE pump installation kit with cover gasket, seals and hardware
Includes new fuel lines
Includes pump mounted regulator

from

$1028.99

This diesel fuel injection pump is a direct replacement for the original equipment injection pump and has been remanufactured to stringent industry standards for optimum performance and efficiency.

Product Features:

Direct replacement – this diesel fuel injection pump matches the fit and functionality of the original equipment injection pump
Durable construction – this injection pump is remanufactured from quality materials for durability
Cost-effective dealer alternative – offers original manufacturer quality at lower cost than a dealer replacement
Quality tested – this diesel fuel injection pump has been tested for quality and fit for this vehicle application

from

$464.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$309.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$282.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$243.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 2009 Ford F-350 Super Duty Oxygen Sensors

Upgrade Ford F-350 Super Duties with top-quality Oxygen Sensors parts, including 12 OEM and aftermarket selections for your 2009 model.

show more show less

from

$72.99

O2 Sensor

from

$59.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$61.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$66.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$61.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$50.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$72.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$79.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$69.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$102.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness
Recommend to use OTC 6500 Flexihead O2 Sensor Wrench

from

$65.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$52.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

In-Demand Gas Caps for 2009 Ford F-350 Super Duties

Select from 7 premium Gas Caps parts for your 2009 Ford F-350 Super Duty, with prices ranging from $18.29 to $33.49.

show more show less

from

$22.29

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$33.49

Product Features:

Reduces air pollution with proper sealing and venting
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$30.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$18.29

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.29

FUEL TANK CAP

Most Sold 2009 Ford F-350 Super Duty Air Flow Sensors

Explore our best-selling Ford parts for the 2009 F-350 Super Duty among 5 OEM and aftermarket options starting from $35.99.

show more show less

from

$69.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Made to OE spec to ensure a proper fit, form and function.
Sensors are engineered for precision performance, durability and a long service life.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment pressurizing the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging.

from

$65.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$69.99

Wire Assembly

from

$69.99

An essential component in the diesel electronic control system, this sensor provides the vehicle powertrain control module (PCM) with Manifold Absolute Pressure (MAP) . The PCM uses this to control boost pressure and calculate accurate fuel injection quantity. Failure of this component can result in a check engine light, poor drivability and excessive exhaust emissions.

Product Features:

Original equipment fit, form and function
Direct OE replacement
Height: 1.25 in, Length: 3.375 in, Width: 1.875 in

from

$35.99

Original equipment fit, form and function
Direct OE replacement

Top-Rated Fuel and Emissions Systems Brands For Your 2009 Ford F-350 Super Duty

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2009 Ford F-350 Super Duties. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, DENSO, and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2009 F-350 Super Duty start at just $50.99 and are rated as high as 4.7 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2009 Ford F-350 Super Duty Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2009 Ford F-350 Super Duty, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2009 Ford F-350 Super Duty. With over 3 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $50.99, with an average price of just $78.99. Plus, with over 175 customer reviews and an average rating of 4.7 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $50.99

(33)

Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit

“Ok”

from $61.99

(129)

Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit

“Good”

from $123.99

(13)

Pressure Sensor

“Worked just fine, easy install, fixed my check engine light.”

Popular DENSO 2009 Ford F-350 Super Duty Fuel and Emissions Systems

DENSO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2009 Ford F-350 Super Duty owner should feel confident when installing genuine DENSO parts in their vehicle. To ensure the best fit and performance for your 2009 F-350 Super Duty, Advance Auto Parts carries a full inventory of 2 DENSO Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these DENSO Fuel and Emissions Systems range from $59.99 to $61.99, plus, with more than 2 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $61.99

(1)

Oxygen Sensor: Upstream, 4 Wire, 15.39" Long, Heated, Exact Fit

“very fast shipping and cheaper than other auto parts store i looked at in the internet.”

from $59.99

(1)

Oxygen Sensor: 4 Wire, 18.82" Long, Heated, Exact Fit

“fit like OEM”

FAQs for 2009 Ford F-350 Super Duty Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2009 Ford F-350 Super Duties?

Out of 152 Fuel and Emissions Systems that fit 2009 Ford F-350 Super Duties, the following parts are the top sellers:

Fuel Injector O-Ring Kit (3504360) – $8.49
Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (20501734) – $66.99
Air Flow Sensor – New Actual OE Part (10595018) – $91.99

What’s the price range for 2009 Ford F-350 Super Duty Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2009 Ford F-350 Super Duty start at $3.49 and go up to $2,098.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2009 Ford F-350 Super Duty?

The average price for Fuel and Emissions Systems for the 2009 Ford F-350 Super Duty is $167.98. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F-350 Super Duty model years?

Yes, we currently carry Fuel and Emissions Systems for 25 model years of Ford F-350 Super Duties between 1999 and 2025. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2009 Ford F-350 Super Duty?

The cheapest 2009 Ford F-350 Super Duty Fuel and Emissions Systems we carry in stock are:

Fuel Injection Throttle Body Mounting Gasket (20780049) – $3.49
Fuel Injection Throttle Body Mounting Gasket (15781004) – $4.99
Fuel Injection Throttle Body Mounting Gasket (20780105) – $4.99
Exhaust Gas Recirculation (EGR) Valve Gasket (11138753) – $5.49
EGR Cooler Gasket (11742138) – $5.49

What are the top-rated Fuel and Emissions Systems that fit the 2009 Ford F-350 Super Duty?

Out of 6,384 reviews by customers, our 2009 Ford F-350 Super Duty Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2009 Ford F-350 Super Duty and their top-rated products:

Vapor Canister Purge Valves
- Evaporative Emissions Canister Vent Valve (10916191) – $105.99

What types of Fuel and Emissions Systems do you sell for my 2009 Ford F-350 Super Duty?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2009 Ford F-350 Super Duty:

Can I get help with 2009 Ford F-350 Super Duty Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford F-350 Super Duty Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford F-350 Super Duty Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2009 Ford F-350 Super Duty Fuel and Emissions Systems

Carquest Premium – Intake Air Temperature Sensor (Part No.AC20812)

Carquest Premium – Vapor Canister (Part No.CPN1318)

Carquest Premium – Locking Diesel Fuel Tank Cap (Part No.10501D)

Dorman – Direct Fit DPF – Not CARB Compliant (Part No.674-1001)

Dorman – Fuel Tank Straps (Part No.578-384)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Dorman – 6.0L EGR Valve (Part No.904-219)

Bosch – Oxygen Sensor (Part No.18124)

aFe POWER – aFe POWER EGR Cooler (Part No.46-90087)

Dorman – Mechanical Vacuum Pump (Part No.904-805)

Carquest Premium – Fuel Pump Module Assembly M2520824: Fuel Pump, Sending Unit and Strainer (Part No.M2520824)

Dorman – Fuel Tank O-Ring (Part No.911-245)

Dorman – Diesel Fuel Injector Cup Sleeve (Part No.904-213)

Dorman – Diesel Fuel Heater with Water In Fuel Sensor (Part No.904-460)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Carquest Premium – Reman Multi Port Fuel Injector – 8 Pack (Part No.A211-1982-8PK)

Spectra Premium – Fuel Filler Neck (Part No.FN806)

Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1175)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61420)

Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Temperature Sensor (Part No.EGA1272)

NTK – Ambient Air Temperature Sensor (Part No.EF0103)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.CX-2432)

Dorman – Fuel Tank with Lock Ring and Seal (Part No.576-627)

Carquest Premium – Reman Diesel Pump (Part No.AM92113)

Dorman – Multi-Purpose Harness (Part No.645-211)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1061)

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1015)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61438)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0012)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Carquest – Fuel Injector (Part No.67603)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25082)

Bosch – Fuel Injector: New (Part No.62402)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Dorman – Diesel Fuel Cooler (Part No.904-292)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61420)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33555)

Felpro – FUEL INJECTOR O-RINGS (Part No.ES 71458)

Cardone – Fuel Injector (Part No.2J-220)

Motorcraft – KIT – INJECTOR (Part No.CN-6017-RM)

Dorman – Remanufactured Diesel Fuel Injector (Part No.502-506)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33688)

Dorman – HD Solutions – Injector Wiring Harness (Part No.904-478)

Delphi – Mass Air Flow Sensor (Part No.AF10431)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73120)

Carquest Premium – MASS AIR FLOW SENSOR (Part No.MQ6507)

Delphi – Mass Air Flow Sensor (Part No.AF10140)

Dorman – Fuel Pump Driver Module with Mounting Bolts (OE Fix) (Part No.590-001)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E2428516)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1735)

Motorcraft – Fuel Injection Pump Assembly (Part No.PFB-95)

Carquest Premium – Fuel Pump Includes Wiring Harness and Strainer (Part No.E2496033)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Clips, Screws/Washers (Part No.FG1208)

Carquest Premium – Fuel Pump Module Assembly M2520823: Fuel Pump, Sending Unit and Strainer (Part No.M2520823)

Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1210)

Delphi – Electric Fuel Lift Pump: With Gasket (Part No.HFP965)

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1087)

Carquest Premium – Remanufactured Diesel High Pressure Fuel Pump (Part No.AM92073)

Dorman – REMAN DSL PUMP (Part No.502-563)

Delphi – Fuel Pump Module Assembly (Part No.FG1209)

Carquest Premium – Fuel Pump Module Assembly M2520824: Fuel Pump, Sending Unit and Strainer (Part No.M2520824)

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1211)

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1093)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Motorcraft – O2 Sensor (Part No.DY-1401)

DENSO – Oxygen Sensor: 4 Wire, 18.82" Long, Heated, Exact Fit (Part No.234-4127)

DENSO – Oxygen Sensor: Upstream, 4 Wire, 15.39" Long, Heated, Exact Fit (Part No.234-4374)

NTK – Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No.22500)

Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.15717)

Bosch – Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit (Part No.15718)

NTK – Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (Part No.22012)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)