from

$1145.00

Differential

from

$20.29

This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$117.99

Product Features:

PINION YOKE
CAST:1310
U-BOLT STYLE

from

$549.32

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
Special bearing seals to help keep out contaminants, the number one cause of bearing failure
Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
Integral bearing races specifically designed to each application, no one-size-fits-all solution
Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
Original equipment specifications minimize any possibility of the hub cracking
Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
Tapered roller bearings for high load rates when specified

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 60

from

$379.99

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only.

Product Features:

Fits 1999-2004 Ford Super Duty
30 spline
All steel construction
Chromoly internals for added strength
Low profile bezel to reduce impact with obstacles
Defaults to locked position
1/3 turn from disengaged to engaged

from

$21.29

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$344.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 80 with 4.375″ O.D. pinion bearing
Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

from

$67.75

Differential Seal

from

$29.49

Drive Shaft Center Support

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$23.99

Product Features:

Brand may vary by location

from

$233.99

Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$34.99

10.25″ Ford ” OEM” pinion seal.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Ford 10.25″

from

$57.17

The Timken Driveshaft Support is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$488.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 10.25″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.

from

$13.99

Product Features:

Cover gasket
Fits Dana Spicer 60, 70, 70U and 70HD

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$26.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$374.99

Round replacement yoke companion flange for Dana 80. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 80
37 spline
Round companion flange

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.99

55P Chevy Passenger Drop Out gasket.

Product Features:

Side gear thrust washer
Fits Ford 10.25″

from

$67.99

4WD Switch

from

$20.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features: