2009 Ford Expedition Air Conditioning Parts

Essential 2009 Ford Expedition Air Conditioning Parts

Motorcraft – A/C Service Valve (Part No.R1129680423MTR)

A/C Service Valve

from

$11.07
A/C Service Valve

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Cap and Valve A/C System Seal Kit

from

$25.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

A/C Clutch Cycle Switch Connector

from

$20.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Motorcraft – A/C Compressor Clutc (Part No.R1202680526MTR)

A/C Compressor Clutc

from

$19.54
A/C Compressor Clutc

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26721)

O-Ring & Gasket A/C System Seal Kit

from

$23.29
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)

A/C Relief Valve

from

$46.38
A/C Relief Valve

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714689)

A/C Condenser and Receiver Drier Assembly

from

$201.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

KAI – A/C System Seal Kit (Part No.FTT010728)

A/C System Seal Kit

from

$42.99
New Standard Replacement A/C System Seal Kit, MT2725, L4 Engine

Product Features:
  • MT2725, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2003)

A/C Refrigerant Pressure Sensor

from

$39.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Motorcraft – A/C Compressor w/ Clutch, New (Part No.R1000437687MTR)

A/C Compressor w/ Clutch, New

from

$540.57
Motorcraft manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • New compressors are the same components that were installed in the vehicle when it rolled off the assembly line
  • Loaded compressors include:
  • Clutch pulley and coil for easy ordering (most assemblies are pre-charged with PAG refrigerant oil)
  • Pre-shimmed clutch/pulley assemblies to provide direct bolt-in installation
  • Forged-Aluminum Pistons – For maximum life in low-lubrication, high-temperature conditions
  • Tin-Coated Swashplates – For added strength and durability
  • Rubber-Dampened Clutch – To minimize clutch noise during engagement
  • Pre-shimmed Clutch Assembly – To help make installations easier on loaded compressors
  • Dual Center-Seam Seals – For additional leak protection
See More

Motorcraft – A/C Clutch Pulley (Part No.R1018679984MTR)

A/C Clutch Pulley

from

$130.50
A/C Clutch Pulley

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Air Conditioning Service Port Caps

from

$8.99
This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motorcraft – Drier Desiccant Elem (Part No.R1043680321MTR)

Drier Desiccant Elem

from

$74.70
Drier Desiccant Elem

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

A/C Severe Temp Automatic Adjusting Orifice Tube

from

$15.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Color coded
See More

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1065)

A/C Compressor Clutch Connector

from

$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Motorcraft – A/C Compressor Clutc (Part No.R1199680513MTR)

A/C Compressor Clutc

from

$85.54
A/C Compressor Clutc

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64017)

A/C Evaporator Parallel Flow

from

$132.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Dorman – Air Conditioning Pressure Sensor (Part No.904-610)

Air Conditioning Pressure Sensor

from

$77.99
Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:
  • Direct replacement – this A/C transducer switch is an exact replacement for the original switch
  • Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
  • Easy installation – no special tools required
  • Quality tested – switch has been tested to ensure proper fit and function
See More

Carquest Premium – A/C New, with Clutch, with Scroll Compressor (Part No.T78588)

A/C New, with Clutch, with Scroll Compressor

from

$377.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55165)

A/C Discharge Line Hose Assembly

from

$125.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83349)

A/C Desiccant Cartridge Kit

from

$45.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

A/C Compressor Relay Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – Harness Connector (Part No.37211)

Harness Connector

from

$14.29
OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications
See More

Vemo – ABS Speed Sensor, w/ iSP-foil (Part No.N6030348243VMO)

ABS Speed Sensor, w/ iSP-foil

from

$69.70
The VEMO OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. Developed for the anti-block braking system, wheel speed sensors send information to many on-board electronic systems. The rotational speed of the wheels is transmitted from the sensor to the control unit and from there to the transmission, engine, navigation and chassis control systems. This data is essential for ABS, ASR and ESP, to prevent blocking or wheel spin. Due to their versatile use, the sensors make a direct contribution to driving dynamics and safety. Moreover, driving comfort can be improved, fuel consumption reduced and emission levels decreased. Failure of the wheel speed sensors means an acute safety risk! The cause may be electrical or mechanical disruption, for example increased wheel bearing play, a broken wire or a corroded plug contact. With more than 670 different wheel speed sensors for vehicles of all the leading manufacturers, the quality brand VEMO offers a high-quality alternative.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Fuel consumption reduced and emission levels decreased
  • Protects electronics from static discharge.
  • Protects electronics against moisture.
  • Superior filtering function of oxygen.
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.7208K)

A/C Compressor and Component Kit

from

$542.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Carquest – A/C Compressor Cut-Out Switch (Part No.CCS420)

A/C Compressor Cut-Out Switch

from

$112.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Carquest Premium – A/C Condenser (Part No.1074)

A/C Condenser

from

$179.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Chrysler, Ford, GM Panel Retainer, Pack of 3

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
  • Pack of 3
See More

2009 Ford Expedition Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2009 Ford Expedition. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 44 different Air Conditioning Parts in our inventory ranging from $4.49 to $621.36. That means you can find the exact parts or products you need to keep that 2009 Ford Expedition running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Ford Expedition. Dorman, Carquest Premium, and Factory Air are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2009 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 112 reviews in this category, some of the top rated parts include Cap and Valve A/C System Seal Kit with 3.4 stars and A/C Remanufactured; w/ Clutch; w/ FS20 Compressor with 2.7 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2009 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2009 Ford Expedition Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Dorman Air Conditioning Parts

We carry Dorman parts in our stock across AC Line Clip categories, plus more. For a 2009 Ford Expedition, our most popular Dorman Air Conditioning Parts include:
Chrysler, Ford, GM Panel Retainer, Pack of 3
from $4.49
(1)
Chrysler, Ford, GM Panel Retainer, Pack of 3
AC Line Clip

FAQs for 2009 Ford Expedition Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2009 Ford Expedition?

Out of 44 Air Conditioning Parts for the 2009 Ford Expedition, the most popular in our inventory are:
Chrysler, GM Panel Retainer
from $4.49
This product is not rated
Chrysler, GM Panel Retainer
AC Line Clip
A/C New, with Clutch, with FS20 Compressor
from $400.99
This product is not rated
A/C New, with Clutch, with FS20 Compressor
AC Compressor With Clutch
A/C Clutch Cycle Switch Connector
from $20.49
This product is not rated
A/C Clutch Cycle Switch Connector
AC Pressure Transducer Connectors

What are the top-rated 2009 Ford Expedition Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 2009 Ford Expedition based on customer reviews/ratings are:
Cap and Valve A/C System Seal Kit
from $25.99
(5)
Cap and Valve A/C System Seal Kit
“Only needed 4 pieces, many spares”