2009 Ford E-150 Heater Hoses

Your 2009 Ford E-150 might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Heater Hoses you desperately need.

We currently carry 4 Heater Hoses to choose from for your 2009 Ford E-150, and our inventory prices range from as little as $57.99 up to $197.99.

On top of low prices, Advance Auto Parts offers 3 different trusted brands of Heater Hoses for the 2009 Ford E-150. We only sell parts from trusted brands like Dorman so that you can find quality parts you can count on.

Don’t take our word for it – check out customer ratings and reviews to buy with confidence. We have 12 reviews on our Heater Hoses for the 2009 Ford E-150 from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Heater Hoses stock in-person!

Heater Hoses for Your 2009 Ford E-150

Dorman – Molded Heater Hose: Steel (Part No.626-221)

Molded Heater Hose: Steel

from

$57.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

(4 reviews)
View Product

Gates – Premium Modular Coolant Hose (Part No.22614)

Premium Modular Coolant Hose

from

$197.99
Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation + the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 25 1/2 Inch Length (Part No.87969)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 25 1/2 Inch Length

from

$131.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 27 1/2 Inch Length (Part No.87970)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 27 1/2 Inch Length

from

$68.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More
View Product