from

$109.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 06-07;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2006-2007
Weight approx: 8 Lbs
PART GROUP: 3432, 3433

from

$21.62

Crankshaft Seal

from

$62.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$35.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$2159.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$11.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze or aluminum alloy
Babbitt is used in automotive and high-performance
Designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
Aluminum offers greater seizure resistance than other materials
Highly reduces/eliminates bearing wear

from

$363.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Each 260 gasket set includes Fel-Pro½ gaskets (# 1 brand of gaskets)
Provides the exact gaskets the application requires.
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$71.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$36.49

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$48.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$39.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$234.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$72.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$167.99

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$215.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$32.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$39.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$30.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$101.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$82.99

The original solenoids in multiple displacement systems (MDS) on certain Chrysler engines fail when their plastic housings become brittle from underhood heat and the oil passages become clogged by sludge. That failure causes a loss of power, rough idle and decreased fuel economy. Troubleshooting the symptoms of a failing MDS requires inspection of all four of the engine’s MDS solenoids, whose fragile housings often break during removal from the engine. This OE FIX MDS solenoid features a more durable aluminum housing and premium compression-tested O-rings to restore the system pressure required to deactivate the cylinder during MDS operation..

Product Features:

Upgraded design – this MDS solenoid features a durable aluminum housing instead of the failure-prone plastic factory housing, and premium O-rings to restore the system pressure required for proper MDS operation.
Complete assembly – solenoid includes new O-rings and mounting bolt for a complete repair
Application specific – made to directly replace the original MDS solenoid on certain Chrysler, Dodge, Ram, and Jeep vehicles
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

from

$20.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$41.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

UNIQUE COMBUSTION SEAL – Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$40.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$44.99

Timing Set includes all components for a quick and efficient replacement

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information
Contains Cam Sprocket, Crank Sprocket and Chain.

from

$458.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$10.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Engine$aver Hardware cost-saving application
Repairs worn sealing surfaces to assure a leak free repair
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Validated for fit, form, and function

from

$36.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$124.48

MAHLE Original replacement oil pumps are functionally equivalent to OEM-type specifications for oil flow and pressure. Each one is pre-lubricated and cycle tested with oil to insure that it meets performance requirements. In fact, documented test results show that MAHLE Original oil pumps produce up to 5 PSI more oil pressure than competitive brands under the same operating conditions. Nearly all MAHLE Original oil pumps use cast iron housings to offer better wear life and minimize clearance changes resulting from varying engine-operating temperatures. Cover plates are made of heat-treated, high-grade cast iron. Pump shafts are produced from fatigue resistant, high-strength alloy steel. All of these features contribute to your assurance of a long, trouble-free service life.

Product Features: