2009 Dodge Durango Remanufactured Engines
More 2009 Dodge Durango Remanufactured Engines
Find your specific 2009 Dodge Durango original or aftermarket Remanufactured Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2009 Dodge Durango Remanufactured Engines
Premium Drive Train – Engine Assembly (Part No.L3611CR)
from
$4683.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Premium Drive Train – Engine Assembly (Part No.L4702CR)
from
$3834.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Premium Drive Train – Engine Assembly (Part No.L5713CR)
from
$4655.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Premium Drive Train – Engine Assembly (Part No.L4708EGRCR)
from
$3819.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Premium Drive Train – Engine Assembly (Part No.L3705CR)
from
$3139.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chry 318 92-03 Engine (Part No.DD58)
from
$2229.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Premium Drive Train – Engine Assembly (Part No.L4799CR)
from
$3595.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chrysler 09 HEMI Engine (Part No.DDM8)
from
$4319.99
Reman Engines are dismantled & assembled by the same process each time: All heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is tested after assembly for compression, oil pressure & sealed water jacket
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Premium Drive Train – Engine Assembly (Part No.L4704EGRCR)
from
$3595.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chry 360 02-03 Engine (Part No.DDA2)
from
$2439.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Premium Drive Train – Engine Assembly (Part No.L5703EGRCR)
from
$4326.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Premium Drive Train – Engine Assembly (Part No.L5710CR)
from
$4655.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chry 5.7 HEMI 05-08 Engine (Part No.DDH9)
from
$4078.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 4.7/287 04-07 Engine (Part No.DDF8)
from
$3149.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 5.7 HEMI 04-08 Engine (Part No.DDH8)
from
$3819.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 4.7/287 04-07 Engine (Part No.DDF7)
from
$3196.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 4.7/287 99-04 Engine (Part No.DD93)
from
$3254.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 09-12 HEMI Engine (Part No.DDM2)
from
$4379.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 3.7/226 05-06 Engine (Part No.DDH1)
from
$3389.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Spartan – Engine Long Block; Chry 5.7 HEMI 400HP 04-08 Engine (Part No.HP103T)
from
$5408.99
This engine is a great Performance upgrade for those looking to get a little more power from there vehicle or can be used to retrofit into a muscle car application! ***This is for engines WITHOUT MDS/Cylinder Deactivation***
Product Features:
See More
Product Features:
- High Performance Engines are based on dyno proven combinations built with name brand parts. No core, engine sold outright strapped & shipped on wooden pallet crate.
Spartan – Engine Long Block; Chry 13-15 HEMI Engine (Part No.DDM22)
from
$3929.99
Reman Engines are dismantled & assembled by the same process each time: All heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is tested after assembly for compression, oil pressure & sealed water jacket.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Premium Drive Train – Engine Assembly (Part No.L3707CR)
from
$3406.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chry 4.7/287 2004 Engine (Part No.DDF9)
from
$3139.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Premium Drive Train – Engine Assembly (Part No.L5709TCR)
from
$4556.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chry 4.7/287 02-04 Engine (Part No.DDA4)
from
$3459.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Premium Drive Train – Engine Assembly (Part No.L5705CR)
from
$4655.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Premium Drive Train – Engine Assembly (Part No.L4704CR)
from
$3595.99
(PDT) Premium Drivetrain Engines are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each engine assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.
Product Features:
See More
Product Features:
- REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. 100% gauging of all cylinder bores for diameter and roundness after final honing operation. 100% new pistons, rings and bearings are installed in every engine.
- CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs. Valve seats are machined, inspected and replaced if necessary. Valve guides are inspected with an air gauge and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. 100% new valves, seals and lifters are used in every head. All head and valve assemblies are quantified for leakage using a vacuum decay process.
- CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed.
- CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal. All oil galley holes are chamfered and brushed after machining and the crankshaft is given a final wash to ensure cleanliness. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals.
- DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways.
- Product might not be available in all states due to local laws.
Spartan – Engine Long Block; Chrysler 3.6 ERB 14-19 Engine (Part No.DDHP)
from
$4759.99
Reman Engines are dismantled & assembled by the same process each time: All heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is tested after assembly for compression, oil pressure & sealed water jacket.
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Popular 2009 Dodge Durango Remanufactured Engines Categories
2009 Dodge Durango Remanufactured Engines
Maybe you’re in the middle of a full rebuild of that 2009 Dodge Durango. Maybe you just need a couple of Remanufactured Engines. Either way, Advance Auto Parts has 6 different Remanufactured Engines in our inventory ranging from $3,406.99 to $4,556.99. That means you can find the exact parts or products you need to keep that 2009 Dodge Durango running smoothly.
Remanufactured Engines are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Dodge Durango. Spartan and Premium Drive Train are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Remanufactured Engines for your 2009 Dodge Durango, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Remanufactured Engines to keep your 2009 Dodge Durango rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Remanufactured Engines Brands To Make Your 2009 Dodge Durango Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Dodge Durango demands trusted brand parts and products to keep it running. Many trusted brands of Remanufactured Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Durango the best it can be. Be sure to browse some of our top Remanufactured Engines brands and parts.
Popular Spartan Remanufactured Engines
We carry Spartan parts in our stock across Remanufactured Engines categories, plus more. For a 2009 Dodge Durango, our most popular Spartan Remanufactured Engines include:
FAQs for 2009 Dodge Durango Remanufactured Engines
What are the most purchased Remanufactured Engines for the 2009 Dodge Durango?
Out of 6 Remanufactured Engines for the 2009 Dodge Durango, the most popular in our inventory are:
from
$3459.99
This product is not rated
Engine Long Block; Chry 3.7/226 07-08 Engine
Remanufactured Engines
from
$4319.99
This product is not rated
Engine Long Block; Chrysler 09 HEMI Engine
Remanufactured Engines
