2009 Chevrolet Tahoe Engine Parts

The ACDelco GM Original Equipment Engine Timing Chain Tensioner is a GM-recommended replacement for your vehicle’s original component. It keeps the engine timing chain at the proper tension for a long and trouble-free life. This original equipment engine timing chain tensioner has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Maintains the proper tension in the engine timing chain in your vehicle for proper performance
• Designed to GM OE specifications to optimize component life and prevent noise
• Validated to perform with critical engine management sensors, such as cam position sensors, to ensure that new parts will not turn on the Check Engine light in your vehicle
• Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.

Product Features:

• Cylinder Deactivation Manifold
• Cylinder Deactivation Manifold
• The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.
• Constructed of aluminum for increased durability and a longer service life
• No special tools required

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Engine$aver Hardware cost-saving application
• Repairs worn sealing surfaces to assure a leak free repair
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Validated for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
• SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

• Retro-fit performance
• High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
• Eliminates frequent lash adjustments
• Significant friction reduction substantially increases horsepower and fuel economy
• Delivers quieter engine operation
• Application-specific design for perfect fit and correct operation

MAHLE Original piston rings lead the way in ring technology and innovation for the Aftermarket – after all, MAHLE is the largest manufacturer of piston rings in the world. MAHLE Original rings are at the forefront of light vehicle piston ring technology. Extensive OE connections mean that MAHLE Original rings have the technological edge. Things like the CP-20 oil ring, narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings and coated compression rings for diesels all came from the OE. The MAHLE Original performance line proves time and again that it should be the ring of choice under every hood – regardless of the application. Grey cast iron or ductile iron was traditionally the material of choice for automotive applications – today, steel is preferred over iron by more and more engine builders. Steel compression ring technology has been used in heavy-duty applications for over 30 years. That know-how has become essential to the design and engineering of today’s automotive engines. Steel piston rings offer higher tensile strength, higher yield strength, greater fatigue life, and greater hardness while still offering a lower ring mass. These factors lead to better stress resistance, reduced groove pound-out, longer service life, better conformability, superior oil economy, and improved blow-by control while still lowering friction.

Product Features:

• Ease of installation makes them the premier choice for rebuilders everywhere.
• The CP-20 rings can withstand the harsh operating environments in today’s engines.
• The CP-20 consists of a barrel-faced top compression ring for better seal and quicker break-in, a reverse torsional twist second ring for better oil control
• The CP-20 design oil ring that is easier to install
• Chemically polished for better oil drain-back
• A 20 degree ear angle to ensure side seal around the ring

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed bronze alloy lining with overplate
• Popular for fatigue resistance & strength
• Provides conformability required for older apps
• Our standard material is comparable to competitors performance bearing
• Note – This material offers less resistance to wear & corrosion than other materials.
• Utilizes ISO & QS certified manufacturing

A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Each 260 gasket set includes Fel-Pro½ gaskets (# 1 brand of gaskets)
• Provides the exact gaskets the application requires.
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed Babbitt lining material
• Used in automotive and high-performance
• Babbitt is designed to perform under extreme loads w/o damaging other engine parts
• Babbitt is more environmentally friendly than other material
• ISO & QS certified manufacturing

Product Features:

• Ideal for street high performance and racing applications
• Use stock ratio rocker arms only
• Use stock ratio rocker arms only
• Basic operating RPM range is between 1, 500-6, 500 RPM
• Use with Edelbrock aftermarket cylinder heads, adjustable valve-train components and 9. 5: 1 compression ratio

ACDelco GM Original Equipment Engine Timing Damper Kits remove unnecessary slack from the timing chain to help prevent chain rattle and excessive component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment engine timing damper kits contain components that will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• Removes excessive slack from the timing chain to help prevent chain rattle and excessive component wear
• Contains necessary parts to replace your vehicle’s engine timing damper
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Remanufactured precision machined OE crankshafts.

Product Features:

• Includes matching rod and main bearings.
• Journals Micropolished.
• All units subject to complete quality inspection.

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Advance Auto Parts is proud to carry this part with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

• The part is precision machined with high grade material for greater durability
• Maintains excellent chain or belt tension
• Meets or exceeds O.E.M. performance
• Part is quality inspected and tested

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design for Unsurpassed quality you can trust
• Validated for fit, form, and function
• Quality that you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine camshaft position sensor connector matches the appearance and function of the factory hardware on specified applications
• Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

• Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
• Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

• Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
• Durable construction – stringent specifications and careful construction help ensure longevity
• Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:

• Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
• Utilizes the latest in design and technology to offer a complete chain kit solution
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information