2009 Chevrolet Silverado 3500 HD Differentials

Essential 2009 Chevrolet Silverado 3500 HD Differentials

Motive Gear – Differential Pinion Shim Kit (Part No.1102)

Differential Pinion Shim Kit

from

$9.49


Product Features:
  • KIT SHIM PINION
See More

Yukon Gear – Spool For GM & Chrysler 11.5", 30 Spline (Part No.32185)

Spool For GM & Chrysler 11.5", 30 Spline

from

$2100.00
Product Features:
  • Fits Chrysler and GM 11.5″ with 30 spline axles
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

USA Standard Gear – Master Overhaul Kit for the ’98 and Newer GM 10.5" 14T Differential (Part No.37046)

Master Overhaul Kit for the '98 and Newer GM 10.5" 14T Differential

from

$405.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1998 and up GM 10.5″ 14 bolt truck
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – 4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8" (Part No.21717)

4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8"

from

$429.99
Yukon 4340 cut to length shaft for GM 14T & 11.5″, 30 spline, 34.8″-38.8″. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. Please verify bolt pattern on 2011 & later models. This axle has a 3.562″ bolt pattern. Some late model applcaitons use a larger bolt pattern.

Product Features:
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • 4340 Chromoly
  • 30 spline
  • Cut to length design fits 34.8″-38.8″ applications
See More

Yukon Gear – 11.5" GM Standard Open Cross Pin Shaft (Part No.33409)

11.5" GM Standard Open Cross Pin Shaft

from

$46.99
11.5″ GM standard Open cross pin shaft.

Product Features:
  • Cross pin shaft
  • Fits GM 11.5″
See More

Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)

Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS

from

$32.99
Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.

Product Features:
  • Side adjuster lock bolt
  • Fits GM 7.2″ IFS and 9.25″ IFS
See More

Yukon Gear – Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33362)

Left Hand Carrier Bearing Adjuster For 9.25" GM IFS

from

$98.99
Left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:
  • Side adjuster
  • Fits 2010 and down GM 9.25″ IFS
  • Left hand side
See More

USA Standard Gear – Spider Gear Kit For GM 11.5" (Part No.39020)

Spider Gear Kit For GM 11.5"

from

$208.99
11.5AAM GM & Chrysler (fits All Years) UNIVERSAL standard Open spider gear kit.

Product Features:
  • Spider gear kit
  • Fits GM and Chrysler 11.5″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 9.25" IFS Reverse Rotation In A 5.38 Ratio (Part No.24165)

High Performance Ring & Pinion Gear Set For GM 9.25" IFS Reverse Rotation In A 5.38 Ratio

from

$499.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM 9.25″ front
  • 9.25″ ring gear
  • 30 spline pinion
  • 12 ring gear bolts
  • 5.38 ratio
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Yukon Gear – Pinion Install Kit For GM 9.25" Differential (Part No.13074)

Pinion Install Kit For GM 9.25" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 9.25″ IFS
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

from

$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:
  • Clutch kit
  • Fits GM 10.5″ 14 bolt truck with Eaton positraction
  • Carbon fiber clutches
See More

MTC – Differential Drain P (Part No.J70581460602MTC)

Differential Drain P

from

$10.30
Differential Drain P

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

10.5" GM 14 Bolt Truck Ring Gear Bolt

from

$11.99
10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

Product Features:
  • Ring gear bolt for GM 10.5″ 14 bolt truck
  • 4.56 and up ratio
  • 1/2″ x 18 thread
  • 2.522″ overall length
See More

Pro-King – Differential Pinion Yoke Washer (Part No.742A215)

Differential Pinion Yoke Washer

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    FAG US – SHAFT SEAL (Part No.SS3085)

    SHAFT SEAL

    from

    $47.99
    SHAFT SEAL

    USA Standard Gear – Bearing Kit For ’11 & Up GM 9.25" IFS Front (Part No.58024)

    Bearing Kit For '11 & Up GM 9.25" IFS Front

    from

    $508.99
    This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

    Product Features:
    • Fits 2011 and up GM 9.25″ IFS
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
    See More

    Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

    High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

    from

    $12.49
    Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

    Product Features:
    • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
    • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
    • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
    • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
    • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
    See More

    Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

    Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

    from

    $23.99
    Product Features:
    • Cross pin bolt
    • Fits GM 9.5″ and 9.25″ IFS
    See More

    Yukon Gear – Pilot Bearing For 10.5" 14 Bolt Truck, 2.050" O.D. (Part No.18041)

    Pilot Bearing For 10.5" 14 Bolt Truck, 2.050" O.D.

    from

    $57.99
    Pilot bearing for 10.5″ 14 bolt truck, 2.050″ O.D.

    Product Features:
    • Pilot bearing
    • Fits GM 10.5″ 14 bolt truck
    • 2.050″ O.D.
    See More

    Yukon Gear – 11.5" Chrysler & GM Cover Gasket (Part No.23013)

    11.5" Chrysler & GM Cover Gasket

    from

    $44.99
    11.5″ Chrysler & GM cover gasket.

    Product Features:
    • Cover gasket
    • Fits GM and Chrysler 11.5″
    See More

    Felpro – Axle Housing Cover Gasket (Part No.RDS 55486)

    Axle Housing Cover Gasket

    from

    $15.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    SKF – Wheel Bearing (Part No.K8000205983SKF)

    Wheel Bearing

    from

    $60.23
    SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

    Product Features:
    • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
    • 100% tested to the actual OE specifications per part number for fit, form and function
    • High quality steel and surface finishes
    • Proper implementation of heat treatment
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM11.5IK)

    Differential Gear Install Kit

    from

    $74.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Yukon Gear – Left Hand Adjuster Lock Nut For 9.25" GM (Part No.33354)

    Left Hand Adjuster Lock Nut For 9.25" GM

    from

    $26.99
    Left hand adjuster lock nut for 9.25″ GM.

    Product Features:
    • Side adjuster lock nut
    • Fits GM 9.25″
    See More

    Yukon Gear – 11.5" Chrysler & GM Helical Gear Type Positraction (Part No.32244)

    11.5" Chrysler & GM Helical Gear Type Positraction

    from

    $1806.99
    11.5″ Chrysler Helical gear Type positraction.

    Product Features:
    • Fits GM and Chrysler 11.5″
    • 30 spline
    See More

    2009 Chevrolet Silverado 3500 HD Differentials

    Maybe you’re in the middle of a full rebuild of that 2009 Chevrolet Silverado 3500 HD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 216 different Differentials in our inventory ranging from $1.89 to $4,019.99. That means you can find the exact parts or products you need to keep that 2009 Chevrolet Silverado 3500 HD running smoothly.

    Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Chevrolet Silverado 3500 HD. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 2009 Chevrolet Silverado 3500 HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 438 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.5 stars and Multi Purpose Seal with 4.2 stars.

    So if you’re in the market for aftermarket Differentials to keep your 2009 Chevrolet Silverado 3500 HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 2009 Chevrolet Silverado 3500 HD Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Chevrolet Silverado 3500 HD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Silverado 3500 HD the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Dorman Differentials

    We carry Dorman parts in our stock across Differential Covers categories, plus more. For a 2009 Chevrolet Silverado 3500 HD, our most popular Dorman Differentials include:
    Rear Differential Cover
    from $77.99
    (2)
    Rear Differential Cover
    Differential Covers

    FAQs for 2009 Chevrolet Silverado 3500 HD Differentials

    What are the most purchased Differentials for the 2009 Chevrolet Silverado 3500 HD?

    Out of 216 Differentials for the 2009 Chevrolet Silverado 3500 HD, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 2009 Chevrolet Silverado 3500 HD Differentials?

    Top-rated Differentials for your 2009 Chevrolet Silverado 3500 HD based on customer reviews/ratings are:
    Multi Purpose Seal
    from $34.99
    (8)
    Multi Purpose Seal
    “Nicely made. Heavy duty-just like factory parts.”
    Multi Purpose Seal
    from $44.99
    (5)
    Multi Purpose Seal
    “How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”
    Taper Bearing Set
    from $13.79
    (4)
    Taper Bearing Set
    “Worked great on my 1981 Chevy C20”