2009 Chevrolet Impala Valve Cover and Cylinder Heads
More 2009 Chevrolet Impala Valve Cover and Cylinder Heads
Find your specific 2009 Chevrolet Impala original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2009 Chevrolet Impala Valve Cover and Cylinder Heads
ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020409594ACD)
from
$62.10
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Engine Valve Cover Grommet Set (Part No.ES 72833)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Mahle – Valve Cover O-Ring S (Part No.A8026454930MAH)
from
$21.55
Valve Cover O-Ring S
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Competition Cams – SUPER VALVE LOCKS, 3/8" 1 ST (Part No.612-16)
from
$553.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
Dorman – Cylinder Deactivation Manifold (Part No.917-162)
from
$228.99
The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.
Product Features:
See More
Product Features:
- Cylinder Deactivation Manifold
- Cylinder Deactivation Manifold
- The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.
- Constructed of aluminum for increased durability and a longer service life
- No special tools required
Dorman – Cylinder Deactivation Manifold (Part No.917-162XD)
from
$326.99
This engine valve lifter oil manifold matches the fit and function of the original oil distribution and solenoid assembly and is designed to help restore the proper operation of the cylinder deactivation system on specified vehicles.
Product Features:
See More
Product Features:
- Upgraded design – this cylinder deactivation manifold has enhanced features to match the fit, function and performance of the factory part on certain vehicles
- Improved seals – increased sealing surface interface, redesigned rod sub-assembly, and superior quality O-rings and gasket
- Reliable operation – internal bore step incorporates a radius edge to prevent valve sticking
- Durable construction – solenoid rod hardened to improve wear resistance and maintain tighter tolerances
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9918 PT)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.7619 B)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Sealed Power – Engine Push Rod (Part No.RP-3181)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- State-of-the-art manufacturing
- Exceptional material quality
- Exacting tolerances
- Heat treated tips
- Stock or mild modified replacement
- Made in USA
Sealed Power – Engine Push Rod (Part No.RP-3255)
from
$2.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- State-of-the-art manufacturing
- Exceptional material quality
- Exacting tolerances
- Heat treated tips
- Stock or mild modified replacement
- Made in USA
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72196)
from
$113.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72892)
from
$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Valve Cover Grommet Set (Part No.ES 71044)
from
$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Edelbrock – Small-Block Chevy E-Street Cylinder Heads 64cc (Part No.5089)
from
$1229.99
The Edelbrock #5089 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and
Product Features:
See More
Product Features:
- Complete Pair For Hydraulic Flat Tappet
- 64cc Combustion Chamber Volume
- 2.02cc Intake/60cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Spartan – Engine Cylinder Head; Chev 3.5/3.9L 06-11 Head (Part No.2CVN)
from
$554.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Spartan – Engine Cylinder Head; Chev 350 69-85 Cyl Head (Part No.2C09)
from
$341.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Felpro – Engine Cylinder Head Gasket Set (Part No.HST 9071 PT-1)
from
$145.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR THE TOUGHEST CONDITIONS — Engineered for hardworking vehicles that operate in severe conditions
- STRONG AND DURABLE — Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
- PREMIUM MATERIALS — High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
- SUPERIOR SEAL — Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-2)
from
$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Mahle – Cylinder Head Gasket Set (Part No.A80101873195MAH)
from
$310.03
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head sets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials in all head sets
- Packaged in shrink wrapped tray
- Every part you need to complete your gasket repair in one package unless otherwise stated
Sealed Power – Engine Valve Lifter (Part No.HT-969)
from
$8.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2148A)
from
$24.79
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
- New OEM riveted pin retaining design
Sealed Power – Engine Valve Lifter (Part No.HT-2303)
from
$57.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-817)
from
$13.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4317)
from
$449.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 3/8″ 12-Point, 9/16″ 12-Point, 1/8″ Allen, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 2004-Up Chevy LS1, LS6, 5.7/6.0L
- Sold As A Kit
Popular 2009 Chevrolet Impala Valve Cover and Cylinder Heads Categories
2009 Chevrolet Impala Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2009 Chevrolet Impala. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 28 different Valve Cover and Cylinder Heads in our inventory ranging from $0.65 to $589.99. That means you can find the exact parts or products you need to keep that 2009 Chevrolet Impala running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Chevrolet Impala. Sealed Power, Felpro, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2009 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 303 reviews in this category, some of the top rated parts include Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts with 4.3 stars and Engine Valve Cover Grommet Set with 5.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2009 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2009 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Dorman Valve Cover and Cylinder Heads
We carry Dorman parts in our stock across Engine Valve Lifter Oil Manifolds categories, plus more. For a 2009 Chevrolet Impala, our most popular Dorman Valve Cover and Cylinder Heads include:
Top 2009 Chevrolet Impala Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 2009 Chevrolet Impala. Popular Sealed Power parts include:
FAQs for 2009 Chevrolet Impala Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2009 Chevrolet Impala?
Out of 28 Valve Cover and Cylinder Heads for the 2009 Chevrolet Impala, the most popular in our inventory are:
What are the top-rated 2009 Chevrolet Impala Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 2009 Chevrolet Impala based on customer reviews/ratings are:
from
$61.99
(16)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
“The GMC Sierra is on the road again.”
