2009 Chevrolet Express 1500 Engine Parts

MAHLE Original piston rings lead the way in ring technology and innovation for the Aftermarket – after all, MAHLE is the largest manufacturer of piston rings in the world. MAHLE Original rings are at the forefront of light vehicle piston ring technology. Extensive OE connections mean that MAHLE Original rings have the technological edge. Things like the CP-20 oil ring, narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings and coated compression rings for diesels all came from the OE. The MAHLE Original performance line proves time and again that it should be the ring of choice under every hood – regardless of the application. Grey cast iron or ductile iron was traditionally the material of choice for automotive applications – today, steel is preferred over iron by more and more engine builders. Steel compression ring technology has been used in heavy-duty applications for over 30 years. That know-how has become essential to the design and engineering of today’s automotive engines. Steel piston rings offer higher tensile strength, higher yield strength, greater fatigue life, and greater hardness while still offering a lower ring mass. These factors lead to better stress resistance, reduced groove pound-out, longer service life, better conformability, superior oil economy, and improved blow-by control while still lowering friction.

Product Features:

• Ease of installation makes them the premier choice for rebuilders everywhere.
• The CP-20 rings can withstand the harsh operating environments in today’s engines.
• The CP-20 consists of a barrel-faced top compression ring for better seal and quicker break-in, a reverse torsional twist second ring for better oil control
• The CP-20 design oil ring that is easier to install
• Chemically polished for better oil drain-back
• A 20 degree ear angle to ensure side seal around the ring

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Includes all parts needed to complete the repair

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Ensure the proper sealing of the engine with our Engine Rear Main Seal Cover. The Seal Cover is designed from high-quality materials to stop and prevent engine oil leakage.

Product Features:

• Rear Main Seal Cover Kit
• Rear Main Seal Cover Kit
• Ensure the proper sealing of the engine with our Engine Rear Main Seal Cover. The Seal Cover is designed from high-quality materials to stop and prevent engine oil leakage.
• SPECIAL TOOL REQUIRED FOR INSTALLATION┬á- GM alignment tool J414792B or Dorman 635-000 (or equivalent) is required to properly install cover assembly. Failure to use the correct tool and installation procedures will result in seal leaks.
• Comes with bolts and gaskets – everything necessary for a complete repair

Product Features:

• Size: 3/4 in. x 10 in. x 12-1/4 in.
• Medium duty applications
• All except Chevrolet V8 applications
• Two-pass design for increased cooling

Crankshaft Seal Cove

This engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles
• Restores functionality – reliable replacement for an original part that is missing, bent or broken
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Valve Cover

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed Babbitt lining material
• Used in automotive and high-performance
• Babbitt is designed to perform under extreme loads w/o damaging other engine parts
• Babbitt is more environmentally friendly than other material
• ISO & QS certified manufacturing

GM Genuine Parts Engine Oil Pan Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The ACDelco GM Original Equipment Engine Cover Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• Engine kit gasket set (full set) contains all the gaskets and seals necessary to completely assemble an engine.
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Crankshaft Seal

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

• A-Series bi-metal aluminum alloy
• Greater seizure resistance than tri-metal material
• IROX coating
• Polymer coating enhances bearing
• Made with silicon for greater surface hardness
• Silicon particles help polish crankshaft journal (reduces wear during operation)

This engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles
• Restores functionality – reliable replacement for an original part that is missing or cracked due to heat and fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
• Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
• Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Coating salt spray tested for over 200 hours to insure durability

Hex-A-Just Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. True Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

• The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
• Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
• Refer to our online catalog for detailed application-specific information
• Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Designed to resist corrosion and leakage, Dorman’s Engine Oil Cooler Hose Assembly is engineered for long-lasting performance. Ensure the smooth transfer of oil from the engine to the cooler, and protect your engine in the process.

Product Features:

• Upgraded from steel and/or rubber construction to corrosion-resistant aluminum (where applicable)
• Includes clips and gaskets (where applicable)
• Direct replacement for trouble-free installation
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

• Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
• Components are manufactured from high quality materials for durable wear
• Components are precision engineered for optimum fit and function
• Designed for long-life and worry-free performance

Oil Dipstick Seal

An ACDelco Professional, premium aftermarket Engine Crankshaft Position Sensor is a high quality replacement for many vehicles on the road today. It monitors the position and rotational speed of the crankshaft. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. This premium aftermarket replacement engine crankshaft position sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted
• Includes all the parts necessary to complete the repair unless otherwise noted

A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine ware, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

• Manufactured from high quality durable materials for long wear
• Precision engineering protects the engine from dirt and contaminants
• Designed for long-life and worry-free performance
• Meets or exceeds original equipment specifications

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Meet or exceed OEM performance requirements
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• A-Series bi-metal aluminum alloy
• Greater seizure resistance than tri-metal material
• Dramatically reduces or eliminates bearing wear
• Made with silicon to provide greater surface hardness
• Silicon particles help polish crankshaft journal to further reduce wear during operation
• Utilizes ISO & QS certified manufacturing

Clevite is the number one name in replacement engine bearings, delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application. As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite BiMetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time. Clevite BiMetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These BiMetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite BiMetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an umbrella groove that allows for superior oil control and improved pressure.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Fatigue-Resistant, adaptable
• Resistant to Wear and Corrosion
• Advanced Surface Coatings

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package