2009 BMW M3 Oil and Lubricants

Essential 2009 BMW M3 Oil and Lubricants

Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)

Ceramic Extreme Brake Parts Lubricant

from

$22.93
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:

Product Features:
  • Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
  • Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
  • Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
  • DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
See More

FRAM – Full Synthetic 10W30 Engine Oil – Helps Extend Engine Life – 1 Qt (Part No.F940)

Full Synthetic 10W30 Engine Oil - Helps Extend Engine Life - 1 Qt

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

Castrol – EDGE High Mileage 5W-30 Full Synthetic Engine Oil 1 Quart (Part No.15979F)

EDGE High Mileage 5W-30 Full Synthetic Engine Oil 1 Quart

from

$12.99
CASTROL EDGE High Mileage 5W-30 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology that provides 10X better high-temperature performance and 6X better wear protection. The oil is designed with Phosphorus Replacement Technology that preserves the catalytic converter and the emission system. It meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and other OEM specifications. Castrol EDGE High Mileage is a full synthetic motor oil that offers superior performance and protection for high mileage engines. It is available in different grades, including 5W-20, 5W-30, and 10W-30. Try Castrol EDGE High Mileage today and extend the life of your engine.

Product Features:
  • 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
  • 6x better wear protection – as measured in seq iva test vs. latest test limit
  • From the makers of the No. 1 high mileage brand
  • Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c961-a1 and wss-m2c946-b1, meets engine test requirements of chrysler ms 6395 and 13340
  • Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
  • Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
  • Try castrol edge high mileage today
See More

FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)

5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption

from

$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)

10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts

from

$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
  • Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
  • Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
See More

Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.1598B1)

EDGE 5W-30 Advanced Full Synthetic Engine Oil: 5 Quart

from

$37.99
Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:
  • 3x stronger against viscosity breakdown than leading full synthetic (based on kurt orbahn test in 5W-30 grade)
  • 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
  • 6x better wear protection
  • 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
  • Full Synthetic Oil Composition: Castrol EDGE w/SPT Engine Oil is a full synthetic oil that contains new powerful dispersant molecules, providing superior engine protection and performance.
  • Strongest Oil: Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, providing the best combination of sludge protection, wear protection, and maximum engine performance.
See More

Royal Purple – 5W30 High Performance Synthetic Oil (5 Quart) (Part No.51530)

5W30 High Performance Synthetic Oil (5 Quart)

from

$45.99
Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:
  • Better wear protection
  • Increased fuel efficiency
  • Better protection of the expensive catalytic emission system
  • Improved compatibility with fuels containing ethanol
  • Superior corrosion protection
  • Meets ILSAC GF-5 and Dexos1 performance requirements
See More

FRAM – 5W-20 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F662-5QT)

5W-20 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart

from

$25.99
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
See More

Pennzoil – Full Synthetic 5W-40 Engine Oil – Helps Extend Engine Life – 1 Qt Bottle (Part No.550051120)

Full Synthetic 5W-40 Engine Oil - Helps Extend Engine Life - 1 Qt Bottle

from

$11.49
Pennzoil Platinum Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed.1 Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum Euro motor oil.

Product Features:
  • No other leading engine oil provides better protection from friction1? 1 based on sequence iva wear test using sae 0w-40.
  • Better fuel economy2 2 meets the requirements of mb 229.5 which includes fuel economy improvement (fei) requirement as determined in industry standard gasoline engines
  • Protects horsepower
  • Nothing keeps your engine close to factory clean3 3 based on sequence vh and m-111 sludge test using sae 0w-40.
  • Complete protection and performance for European vehicles.
  • Extends engine life and protects for up to 15 years or 500,000 miles, whichever comes first.
See More

Mobil Super – 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98010)

5W-30 Synthetic Blend Motor Oil, 5 Quart

from

$25.99
Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes. Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced motor oil formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Available in 1-qt. and 5-qt. bottles, Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. (Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ 52 weeks ending January 2, 2021)

Product Features:
  • Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
  • Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
See More

FRAM – 5W20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F662)

5W20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.
See More

FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)

Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart (Part No.15A66D)

GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart

from

$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:
  • 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Premium-quality base oils and anti-wear additives that help extend the life of your engine
  • Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
  • Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
  • Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
  • Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
See More

FRAM – Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F943-5QT)

Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 5 Quart (Part No.881166)

European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 5 Quart

from

$35.99
European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:
  • Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
  • Extra wear protection vs. industry and oem standards with advanced anti-wear additives
  • Superior performance for european gasoline and diesel engines
  • Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
  • Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
  • Premium Protection: Valvoline European Vehicle Full Synthetic Engine Oil is specially designed to extend the life of European-made gasoline and diesel engines, providing premium protection against wear, oil breakdown, and deposits better than industry sta
See More

Castrol – GTX Ultraclean 5W-20 Synthetic Blend Motor Oil: 5 Quart (Part No.15A69C)

GTX Ultraclean 5W-20 Synthetic Blend Motor Oil: 5 Quart

from

$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:
  • 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Premium-quality base oils and anti-wear additives that help extend the life of your engine
  • Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
  • Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
  • Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
  • Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
See More

Castrol – GTX 10W-30 Conventional Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.15B7AA)

GTX 10W-30 Conventional Motor Oil, Helps Extend Engine Life, 5 Quart

from

$29.99
Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:
  • Superior protection against engine sludge (When tested in engines with a high level of sludge)
  • Advanced protection against viscosity and thermal breakdown
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Proven Longevity: With over 50 years of innovation and trust, Castrol GTX helps extend the life of your engine by protecting against new oil splatter formation better than tough industry standards.
  • Adaptable to Severe Conditions: Designed to perform under severe driving conditions such as heavy traffic, poor fuel quality, and harsh driving environments, ensuring your engine remains powerful and reliable.
  • Premium Conventional Oil: As a premium conventional motor oil, Castrol GTX meets the needs of both consumers and vehicle manufacturers, providing reliable performance and protection.
  • Optimal Viscosity: Featuring an SAE oil weight of 10W-30, Castrol GTX offers optimal viscosity for a wide range of temperatures, ensuring smooth engine operation and protection.
See More

Valvoline – Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV955)

Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart

from

$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
  • 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
  • 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
  • Exceptional high/low temperature protection defends your motor no matter the weather conditions
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
  • Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.
See More

Castrol – EDGE High Mileage 10W-30 Full Synthetic Engine Oil 1 Quart (Part No.15979B)

EDGE High Mileage 10W-30 Full Synthetic Engine Oil 1 Quart

from

$12.99
CASTROL EDGE High Mileage 10W-30 Full Synthetic Motor Oil 1 Quart is the perfect solution for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM 6094M standards and offers motor oils that meet OEM specifications. It is available in different grades, including 5W-20, 5W-30, and 10W-30. This motor oil is the natural choice for consumers who want to extend maximum engine performance and preserve the catalytic converter and the emission system. Try CASTROL EDGE High Mileage today and experience the difference in your vehicle’s performance.

Product Features:
  • 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
  • 6x better wear protection – as measured in seq iva test vs. latest test limit
  • From the makers of the No. 1 high mileage brand
  • Meets api sp/sn plus, ilsac gf-6, gm 6094m
  • Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
  • Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
  • Try castrol edge high mileage today
See More

Castrol – EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil, 1 Liter (Part No.15A4E6)

EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil, 1 Liter

from

$15.99
Castrol EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil is for drivers who demand maximum engine performance. This advanced full synthetic oil with Fluid Titanium Technology transforms to be strongest when engine pressure is most severe, reducing power-robbing friction across engine speeds and conditions. Recommended by world-leading car manufacturers, it meets or exceeds industry standards such as API CF/SN and ACEA A3/B4, and is approved for BMW M-models and VW 501 01/505 00. Trusted to perform in high-performance vehicles like the Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Ferrari F12 Berlinetta, and Koenigsegg engines, it is the ultimate engine oil to unlock exhilarating performance with every drive.

Product Features:
  • Transforms to be stongest when engine pressure is most severe
  • Reduces power robbing friction across engine speeds and conditions
  • Recommended by world leading car manufacturers
  • Meets API CF/SN, ACEA A3/B4, Approved for BMW M-models, VW 501 01/505 00
  • MEETS OR EXCEEDS INDUSTRY STANDARDS: ACEA A3/B3, A3/B4; API SN/CF; Approved for VW 501 01/ 505 00
  • TRUSTED TO PERFORM: Approved for BMW M-Models, Approved for use in Koenigsegg engines, Suitable for use in Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron, Ferrari F12 Berlinetta, Ferrari FF, and Koenigsegg engines.
  • Full Synthetic Composition: Provides superior protection and performance with a 10W-60 SAE oil weight, ideal for demanding driving conditions.
See More

Castrol – GTX Conventional 10W-40 Motor Oil: Helps Protect Against Sludge Build Up, 1 Quart (Part No.14CD5A)

GTX Conventional 10W-40 Motor Oil: Helps Protect Against Sludge Build Up, 1 Quart

from

$9.99
Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge (when tested in engines with a high level of sludge)
  • Helps minimize oil consumption
  • Meets ILSAC GF-6 specs
  • Engine Life Extension: Castrol« GTX« has been helping to extend engine life for over 50 years, making it one of the most trusted motor oil brands today.
  • Conventional Oil Composition: As a premium conventional motor oil, Castrol« GTX« meets the needs of both consumers and vehicle manufacturers.
  • Superior Performance: Exceeds tough industry standards by protecting against new oil splatter formation, ensuring optimal engine performance.
  • Versatile SAE Weight: With an SAE oil weight of 10W-40, Castrol« GTX« is suitable for a wide range of vehicles, providing reliable protection and performance.
See More

FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)

Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Castrol – GTX 10W-30 High Mileage Synthetic Blend Motor Oil: 5 Quart (Part No.1597B0)

GTX 10W-30 High Mileage Synthetic Blend Motor Oil: 5 Quart

from

$30.99
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
  • Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
  • Synthetic Blend Composition: Castrol GTX High Mileage Motor Oil is a synthetic blend, offering the benefits of both conventional and synthetic oils for superior engine protection.
  • Extended Engine Life: Designed to protect against sludge, wear, and burn-off, this motor oil helps extend the life of high mileage engines.
  • Optimal Viscosity: With an SAE oil weight of 10W-30, this motor oil provides excellent performance in a wide range of temperatures, ensuring reliable engine protection.
See More

Castrol – EDGE 5W-20 High Mileage Full Synthetic Motor Oil, 1 Quart (Part No.15979D)

EDGE 5W-20 High Mileage Full Synthetic Motor Oil, 1 Quart

from

$12.99
Castrol EDGE High Mileage 5W-20 Full Synthetic Motor Oil is specially formulated for vehicles with over 75K miles, making it the natural choice for consumers who want to extend maximum engine performance. Engineered with Fluid Titanium Technology and Phosphorus Replacement Technology, it preserves the catalytic converter and emission system. This oil offers 10X better high-temperature performance and 6X better wear protection, as measured in Seq IIIH and Seq IVA engine tests respectively, compared to API SP limits. From the makers of the No. 1 High Mileage brand, it meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, Ford WSS-M2C960-A1, WSS-M2C945-B1, and Chrysler MS 6395 requirements. Castrol EDGE OEM specification approvals and is available in grades 5W-20, 5W-30, 10W-30, and 10W-40.

Product Features:
  • 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
  • 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
  • From the makers of the No. 1 High Mileage brand
  • Meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, Meets Ford WSS-M2C960-A1 and WSS-M2C945 -B1, Meets engine test requirements of Chrysler MS 6395
  • Castrol EDGE offers motor oils that meet OEM specification approvals or licenses that cover over 97.3% of the US car parc.
  • Available in the following grades: 5W-20, 5W-30, 10W-30, and 10W-40
  • Try Castrol EDGE High Mileage today
  • Specially Formulated for High Mileage Vehicles: Designed for vehicles with over 75,000 miles, ensuring extended maximum engine performance.
  • Catalytic Converter and Emission System Preservation: Utilizes Phosphorus Replacement Technology to help preserve the catalytic converter and emission system.
See More

FRAM – 5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F610-5QT)

5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

FRAM – Full Synthetic High Mileage 5W-20 Motor Oil: 5 Quart (Part No.F923-5QT)

Full Synthetic High Mileage 5W-20 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
  • Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai
See More

Pennzoil – 5W-30 Full Synthetic Motor Oil, Helps Extend Engine Life, 1 Quart (Part No.550051126)

5W-30 Full Synthetic Motor Oil, Helps Extend Engine Life, 1 Quart

from

$11.49
Pennzoil Platinum® Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed. Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum® Euro motor oil.

Product Features:
  • No other leading motor oil provides better protection from friction1? 1 Based on Sequence IVA wear test using SAE 0W-40.
  • Better Fuel Economy2 2 Meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry standard gasoline engines
  • Protects Horsepower
  • Nothing keeps your engine close to factory clean3 3 Based on Sequence vh and M-111 sludge test using SAE 0W-40.
  • Complete Protection and Performance: Pennzoil Platinum« Euro is specifically designed to provide comprehensive protection and optimal performance for European vehicles.
  • Complete Protection and Performance: Pennzoil Platinum® Euro is specifically designed to provide comprehensive protection and optimal performance for European vehicles.
  • Extended Engine Life: This full synthetic 5W-30 engine oil helps extend engine life, offering protection for up to 15 years or 500,000 miles, whichever comes first.
  • High Purity Base Oil: Made from natural gas, not crude, Pennzoil Platinum« Euro’s base oil is 99.5% free from engine-clogging impurities, ensuring cleaner engine performance.
  • High Purity Base Oil: Made from natural gas, not crude, Pennzoil Platinum® Euro’s base oil is 99.5% free from engine-clogging impurities, ensuring cleaner engine performance.
  • Full Synthetic Composition: As a full synthetic oil, it provides superior lubrication and protection compared to conventional oils, enhancing engine efficiency and longevity.
  • Pennzoil Platinum« Euro meets the rigorous demands of European vehicle engines, ensuring reliable and consistent performance.
  • Pennzoil Platinum® Euro meets the rigorous demands of European vehicle engines, ensuring reliable and consistent performance.
See More

2009 BMW M3 Oil and Lubricants

You count on your 2009 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 3 Oil and Lubricants ranging in price from $15.99 to $22.93, you’re sure to find everything you need for your 2009 BMW M3.

Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 2 different brands like Castrol and Permatex. 2009 BMW M3 Oil and Lubricants start as low as $15.99!

One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 2 extensive product reviews on 2009 BMW M3 Oil and Lubricants.

Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 2009 BMW M3 below to get started!

Top-Rated Oil and Lubricants Brands For Your 2009 BMW M3

Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 BMW M3 running right for years to come. In our inventory you’ll find brands like Castrol Permatex, and even more.

Popular Castrol Oil and Lubricants

You’ll find popular Castrol brand products across Motor Oil. All are waiting to get your 2009 BMW M3 back on the road. Some of the top-rated Castrol products in these categories are: