2008 Volkswagen Passat Clutch Systems

Rel. Brg. Guide O-Ri

LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:

• Top driving comfort
• Absorbs vibrations
• Prevents noise
• Enables comfortable, low-revs driving
• Saves fuel
• Relieves crankshaft and gearbox

LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.

LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.

LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:

• Top driving comfort
• Absorbs vibrations
• Prevents noise
• Enables comfortable, low-revs driving
• Saves fuel
• Relieves crankshaft and gearbox

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

Schaeffler is an OE clutch supplier to nearly all vehicle manufacturers around the world and has always offered a model-specific LuK RepSet to the Aftermarket for professional repair. For complete clutch replacement, you need a clutch disc, pressure plate and release bearings. The LuK RepSet contains these components and they are precision-tuned to function perfectly together. Professional repair can be conducted quickly and trouble-free. Each LuK RepSet includes a premium-quality, clutch pressure plate and disc assembly, a release bearing, and pilot bearing when required.

Product Features:

• Original Equipment Replacement.
• Direct fit application.
• OEM quality friction plates and steels.
• Clutch kit includes; Disc, Pressure Plate, Release Bearing, and Pilot Bearing when required.

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

Clutch Slave Cylinde

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

The Sachs Clutch Master Cylinder is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

The TRW Aftermarket Clutch Slave and Master Cylinder catalogue offers you a premium, original equipment (OE) quality range of brake parts, giving you like-for-like replacement confidence every time. With OE matching, OE quality parts, you can make fast, easy replacement of braking components.

Product Features:

• A robust component manufactured in steel, cast iron, lightweight aluminium or plastic
• A clutch cylinder that is always 100% end of line tested
• Steel and cast iron parts coated with the latest chrome 6-free silver finish for durability and minimal environmental impact
• Clutch cylinders made to the highest OE standards
• Master cylinders made for lightness, toughness and dependability

The FTE Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

Clutch Master Cylind

Schaeffler is an OE clutch supplier to nearly all vehicle manufacturers around the world and has always offered a model-specific LuK RepSet to the Aftermarket for professional repair. For complete clutch replacement, you need a clutch disc, pressure plate and release bearings. The LuK RepSet contains these components and they are precision-tuned to function perfectly together. Professional repair can be conducted quickly and trouble-free. Each LuK RepSet includes a premium-quality, clutch pressure plate and disc assembly, a release bearing, and pilot bearing when required.

Product Features:

• Original Equipment Replacement.
• Direct fit application.
• OEM quality friction plates and steels.
• Clutch kit includes; Disc, Pressure Plate, Release Bearing, and Pilot Bearing when required.

The Sachs Pressure Plate is manufactured in accordance to strict OEM specifications for performance and durability. Sachs manufactures clutches for many leading European automakers and guarantees the same high quality in its aftermarket clutch kits.

Product Features:

• OE Quality and direct fit application.
• Original Equipment Supplier