from

$21.99

Product Features:

KIT SHIM SIDE 9.5″ GM

from

$63.99

07 and up Tundra 9.5″ rear pinion seal W/ 4.0L & 4.7L.Yukon Mighty seal.

Product Features:

Pinion seal
Fits 9.5″ Toyota Tundra rear

from

$514.99

Ring&Pinion Gear Set

from

$313.99

This differential lock actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Ideal replacement – this differential lock actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative differential lock caused by failed original actuator
Cost-effective solution – offers original equipment fit and function at a competitive price
Trustworthy quality – backed by a team of designers and engineers in the United States

from

$15.99

Toyota 07 & up Tundra rear 10.5″ outer pinion slinger w/ 5.7L .

Product Features:

Outer slinger
Fits 10.5″ Toyota Tundra

from

$629.99

USA Standard Master Overhaul kit for Toyota 10.5″ rear

Product Features:

Rear
Toyota 10.5″

from

$758.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:

Easier installation – this pre-pressed axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$469.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Toyota Tacoma and T100 rear without factory locking differential
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$36.99

2007-CURRENT Toyota Tundra front crush sleeve. Approx 1.200″ long.

Product Features:

Crush sleeve
Fits 2007 and up Toyota Tundra front
1.200″ tall

from

$8.51

Axle Seal

from

$5.99

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.

Product Features:

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
20mm x 1.5 thread
30mm socket

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$179.99

07 and up Tundra rear 10.5″ cross pin shaft W/5.7L.

Product Features:

Cross pin shaft
Fits 10.5″ Toyota Tundra

from

$73.99

Product Features:

Cross pin shaft
Fits Toyota Tacoma and T100

from

$12.99

07 and up Tundra rear 9.5″ pinion gear Thrust washer W/4.0L & 4.7L.

Product Features:

Pinion gear thrust washer
Fits 9.5″ Toyota Tundra

from

$13.99

07 and up Tundra rear 10.5″ pinion gear Thrust washer W/5.7L.

Product Features:

Pinion gear thrust washer
Fits 10.5″ Toyota Tundra

from

$15.99

Product Features:

Carrier shim kit for Dana Spicer 30 with 30 spline axles

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Exceptional wear protection of gears and bearings
Provides superior deposit control and protects metal surfaces from rust and corrosion
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$12.99

Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$19.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$159.99

DiffrlCarrBng

from

$34.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$37.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$21.99

Toyota 07 & up Tundra rear 9.5″ outer pinion slinger w/ 4.0L & 4.7L .

Product Features:

Outer slinger
Fits 9.5″ Toyota Tundra

from

$15.99

Ring Gear bolt for Toyota T100, Tacoma & 8″ IFS front. 12mm x 1.0.

Product Features:

Ring gear bolt for Toyota T100 and Tacoma rear without factory locking differential and Toyota Clamshell front
12mm x 1.0

from

$7.99

07 and up Tundra rear 9.5″ ring gear bolts W/ 4.0L & 4.7L.

Product Features:

Ring gear bolt
Fits 9.5″ Toyota Tundra

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$12.99

07 and up Tundra rear 10.5″ ring gear bolt W/ 5.7L.

Product Features:

Ring gear bolt
Fits 10.5″ Toyota Tundra

2008 Toyota Tundra Differentials

More 2008 Toyota Tundra Differentials

Essential 2008 Toyota Tundra Differentials

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Yukon Gear – 07 And Up Tundra 9.5" Rear Pinion Seal (Part No.30340)

USA Standard Gear – Ring&Pinion Gear Set (Part No.36437)

Dorman – Front Differential Actuator (Part No.600-420)

Yukon Gear – Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L (Part No.33024)

USA Standard Gear – Rear Master Overhaul Kit for Toyota 10.5" (Part No.37120)

Dorman – Pre-Pressed Rear Axle (Part No.926-148)

Yukon Gear – Master Overhaul Kit For Toyota T100 And Tacoma Rear Differential, With O Factory Locker (Part No.14113)

Yukon Gear – 2007-Current Toyota Tundra Front Crush Sleeve (Part No.33123)

Corteco – Axle Seal (Part No.K4021473844CFW)

Yukon Gear – Pinion Nut (Part No.33156)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – 07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L (Part No.33415)

Yukon Gear – T100 & Tacoma Standard Cross Pin Shaft (Part No.33417)

Yukon Gear – 07 And Up Tundra Rear 9.5" Pinion Gear Thrust Washer With 4.0L & 4.7L (Part No.33398)

Yukon Gear – 07 And Up Tundra Rear 10.5" Pinion Gear Thrust Washer With 5.7L (Part No.33397)

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)

Driveworks – Ball Bearing (Part No.S-207)

Yukon Gear – DiffrlCarrBng (Part No.18112)

National – Shaft Repair Sleeve (Part No.99166)

National – Shaft Repair Sleeve (Part No.99181)

Yukon Gear – Toyota 07 & Up Tundra Rear 9.5" Outer Pinion Slinger With 4.0L & 4.7L (Part No.33023)

Yukon Gear – Ring Gear Bolt For Toyota T100, Tacoma & 8" IFS Front (Part No.33059)

Yukon Gear – 07 And Up Tundra Rear 9.5" Ring Gear Bolts With 4.0L & 4.7L (Part No.33064)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – 07 And Up Tundra Rear 10.5" Ring Gear Bolt With 5.7L (Part No.33065)

Popular 2008 Toyota Tundra Differentials Categories

2008 Toyota Tundra Differentials

Differentials Brands To Make Your 2008 Toyota Tundra Last

Popular Valvoline Differentials

FAQs for 2008 Toyota Tundra Differentials

What are the most purchased Differentials for the 2008 Toyota Tundra?

More Popular Parts for All Makes