2008 Subaru Legacy Engine Parts

Popular 2008 Subaru Legacy Engine Parts Categories

Essential Engine Parts for 2008 Subaru Legacies

Dorman – Engine Oil pan (Part No.A6060291422DOR)

Engine Oil pan

from

$57.52
Our comprehensive line of Engine Oil Pans include drain plugs for a complete repair. Since this part is a direct replacement, the exact fit provides an additional layer of efficiency and convenience.

Product Features:
  • Stamped steel or cast aluminum construction ensures long lasting durability
  • High strength coating prevents rust
  • Manufactured to strict engineering quality standards
  • Oil drain plug and drain plug gaskets also available separately
See More

Rotomaster – Turbocharger (Part No.J1550116N)

Turbocharger

from

$871.99
Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:
  • 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
  • Unit comes with the required gaskets and mounting hardware for easy installation.
  • Meets or exceeds O.E. performance.
  • Unit comes with a pre-lube syringe to ensure product protection during installation.
  • Manufactured with 100% new components and tested to ensure trouble-free operation
  • 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
  • All units come with the required gaskets and mounting hardware for easy installation.
  • Meets or exceeds O.E. performance.
  • Comes with a pre-lube syringe to ensure product protection during installation.
See More

PowerBond – Premium OEM Replacement Harmonic Balancer; 133mm Diameter (Part No.PB1372N)

Premium OEM Replacement Harmonic Balancer; 133mm Diameter

from

$70.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:
  • Designed as premium OEM replacement balancers for serpentine and V-belt drives
  • Manufactured with ductile iron casting and injection bonded dampening rubber
  • Engineered to offer superior bonding strength between the balancer rings
See More

Imperial – Engine Oil Cooler (Part No.241040)

Engine Oil Cooler

from

$239.99
Product Features:
  • Imperial Swirl-Cool« engine oil cooler kit
  • Size: 1-1/2″ x 6-1/2″ x 18″
  • Heavy-duty applications
  • All except Chevrolet V8 applications
  • Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
  • Heavy duty applications
  • All except Chevrolet V8 applications
See More

Ishino Stone – Oil Pick-up Tube O-R (Part No.A6272342724ISH)

Oil Pick-up Tube O-R

from

$2.01
Oil Pick-up Tube O-R

Original Equipment – Timing Guide Rail (Part No.A5040164924OEA)

Timing Guide Rail

from

$21.91
Timing Guide Rail

NTC – Tama Engine Coolant Temperature Sensor (Part No.C6020173186NTC)

Tama Engine Coolant Temperature Sensor

from

$31.18
The NTC-Tama Engine Coolant Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Turbocharger Coolant Inlet Hose (Part No.904-389)

Turbocharger Coolant Inlet Hose

from

$11.99
This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability..

Product Features:
  • Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles.
  • Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
  • Durable construction – made from quality components to ensure reliable performance and long service life
  • Quality assured – backed by a team of product engineers based in the United States
See More

Cardone New – Turbocharger Cartridge (Part No.2N-1023CHR)

Turbocharger Cartridge

from

$568.99
When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:
  • Eliminates the need to replace the entire turbocharger
  • Allows for reuse of the original compressor and turbine housings
  • Direct O.E. replacement
  • Allows for replacement of turbocharger without the need for balancing
  • Supplied with O.E.-grade components for durability
See More

Dorman – Crankshaft Position Sensor (Part No.907-947)

Crankshaft Position Sensor

from

$60.99
This engine crankshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine crankshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Oil Separator (Part No.B2023719696DOR)

Engine Oil Separator

from

$47.13
Engine Oil Separator

Ishino – Timing Cover Gasket (Part No.A8050117641ISH)

Timing Cover Gasket

from

$12.48
Timing Cover Gasket

Mahle – Cylinder Head Bolt (Part No.A3030376902MAH)

Cylinder Head Bolt

from

$97.96
Cylinder Head Bolt

Koyo – Timing Belt Idler, Double Style Bearing (Part No.A529132588KOY)

Timing Belt Idler, Double Style Bearing

from

$42.70
Koyo Seiko Co., Ltd. (JTECT Corporation) designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. When replacing an earlier design idler on some older engines with this later design bearing, a different length retaining bolt may be required.
See More

Flex A Lite – Oil Cooler Sandwich Adapter Kit (Part No.3965)

Oil Cooler Sandwich Adapter Kit

from

$43.99
Oil Cooler Sandwich Adapter Kit

Dayco – Timing Component Kit; With Tensioner And 4 Camshaft Belt Idlers, 6 Piece Set (Part No.84104)

Timing Component Kit; With Tensioner And 4 Camshaft Belt Idlers, 6 Piece Set

from

$257.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:
  • Engineered for the majority of domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and a tough, wear-resistant belt
  • Meets or exceeds OE quality
See More

Elring – SEAL RING (Part No.A8092118638ELR)

SEAL RING

from

$1.21
SEAL RING

National – Engine Crankshaft Seal (Part No.711039)

Engine Crankshaft Seal

from

$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Ishino – Crankcase O-Ring (Part No.A1021142811ISH)

Crankcase O-Ring

from

$2.31
Crankcase O-Ring

MTC – Bolt (Part No.Y2001284561MTC)

Bolt

from

$1.27
Bolt

Ishino – Oil Cooler Seal (Part No.A6310284445ISH)

Oil Cooler Seal

from

$6.59
Oil Cooler Seal

Ishino – Valve Stem Seal, Intake (Part No.A8070180419ISH)

Valve Stem Seal, Intake

from

$3.31
Valve Stem Seal, Intake

MAHLE Original – Turbocharger Gasket (Part No.F32064)

Turbocharger Gasket

from

$23.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Beck/Arnley – Rear Crankshaft Seal (Part No.052-3670)

Rear Crankshaft Seal

from

$32.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber designed to keep water and dirt out
  • Quality construction for fitment
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

Ishino – Timing Cover Grommet (Part No.A5070117634ISH)

Timing Cover Grommet

from

$3.02
Timing Cover Grommet

Spartan – Engine Long Block; Subaru EJ25DT 04-06 Engine (Part No.712E)

Engine Long Block; Subaru EJ25DT 04-06 Engine

from

$4526.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:
  • Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
  • Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
See More

Spartan – Engine Long Block; Subaru 13-14 2.5L Engine (Part No.722B)

Engine Long Block; Subaru 13-14 2.5L Engine

from

$5516.99
Reman Engines are dismantled & assembled by the same process each time: All heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is tested after assembly for compression, oil pressure & sealed water jacket.

Product Features:
  • Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
  • Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
See More

Spartan – Engine Long Block; Subaru EJ22E Engine (Part No.709F)

Engine Long Block; Subaru EJ22E Engine

from

$3089.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:
  • Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
  • Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
See More

Upgrade your 2008 Subaru Legacy with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2008 Subaru Legacy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Engine Parts are key to keeping your Legacy functioning at its best. At Advance Auto Parts, we offer a wide selection of 217 Engine Parts for the 2008 Subaru Legacy, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2008 Subaru Legacy at great prices. Our Engine Parts inventory for this model ranges from just $1.07 to $5,843.99, with an average price of $129.78. Our 217 Engine Parts in stock come from 45 trusted brands, so you’re sure to find the right part for your 2008 Subaru Legacy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Subaru Legacy, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dayco, Carquest Premium, and more. FELPRO Engine Parts start at just $5.49 and boast an impressive 5 stars average rating from customers. Dayco and Carquest Premium also bring quality to the table, with Engine Parts available starting at $11.99, and at an average 5 stars rating. With 734 customer reviews and counting, our 2008 Subaru Legacy Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Subaru Legacy is always ready to roll. We’re committed to providing you with everything you need to keep your Legacy in top shape, all in one place. Start shopping confidently below for your 2008 Subaru Legacy!

Best-Selling Engine Gaskets and Seals for 2008 Subaru Legacies

Enhance the driving experience in your Subaru with 46 quality Engine Gaskets and Seal components, starting at $1.07.

Felpro – VALVE COVER GASKET SET (Part No.VS 50620 R)

VALVE COVER GASKET SET

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Beck/Arnley – Valve Cover Gasket Set (Part No.036-1855)

Valve Cover Gasket Set

from

$23.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Includes all necessary gaskets and seals needed for a complete installation
  • Made with high quality materials for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 96747)

Fuel Injection Plenum Gasket Set

from

$33.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Beck/Arnley – Valve Cover Gasket Set (Part No.036-1854)

Valve Cover Gasket Set

from

$23.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Includes all necessary gaskets and seals needed for a complete installation
  • Made with high quality materials for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Felpro – Oil Pan Gasket Set: Cork-Rubber, 3 Piece Set (Part No.OS 30656 C)

Oil Pan Gasket Set: Cork-Rubber, 3 Piece Set

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50780 R)

Engine Valve Cover Gasket Set

from

$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50473)

Engine Valve Cover Gasket Set

from

$44.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72814)

Engine Valve Stem Oil Seal Set

from

$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50796 R)

Engine Valve Cover Gasket Set

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

CRP – Seal Ring – Aluminum (Part No.4M10011207CRP)

Seal Ring - Aluminum

from

$1.07
Seal Ring – Aluminum

Felpro – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 1 Piece Set (Part No.OS 30832)

Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 1 Piece Set

from

$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
See More

Original Equipment – Intake Manifold Gask (Part No.A8040302291OEA)

Intake Manifold Gask

from

$4.57
The Original Equipment intake manifold gasket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality
  • Improved reliability, durability, and engine performance
  • Reduced oil consumption
  • Embossment shapes designed to improve durability
See More

Felpro – Gasket Kit (Part No.260-3140)

Gasket Kit

from

$179.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Beck/Arnley – Valve Cover Gasket Set (Part No.036-1860)

Valve Cover Gasket Set

from

$37.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Includes all necessary gaskets and seals needed for a complete installation
  • Made with high quality materials for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Felpro – Engine Conversion Gasket Set (Part No.CS 26533)

Engine Conversion Gasket Set

from

$153.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Ishino Stone – Timing Cover Gasket (Part No.A8050117695ISH)

Timing Cover Gasket

from

$24.61
Timing Cover Gasket

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 96746)

Fuel Injection Plenum Gasket Set

from

$32.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Gasket Kit (Part No.260-3183)

Gasket Kit

from

$284.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Sealed Power – Engine Gasket Set (Part No.260-3140)

Engine Gasket Set

from

$247.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Each 260 gasket set includes Fel-Pro½ gaskets (# 1 brand of gaskets)
  • Provides the exact gaskets the application requires.
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, Includes Grommets, 6 Pieces (Part No.15-10937-01)

Molded Rubber Valve Cover Gasket Set: Direct Fit, Includes Grommets, 6 Pieces

from

$61.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
  • Zero engine leakage for late model vehicles.
See More

Beck/Arnley – Rear Crankshaft Seal (Part No.052-3670)

Rear Crankshaft Seal

from

$32.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber designed to keep water and dirt out
  • Quality construction for fitment
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72933)

Engine Valve Stem Oil Seal Set

from

$32.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Victor Reinz – Fuel Injection Plenum Gasket Set (Part No.15-11038-01)

Fuel Injection Plenum Gasket Set

from

$30.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
See More

Ishino – Stone Valve Cover Gasket (Part No.A8030161434ISH)

Stone Valve Cover Gasket

from

$20.40
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Ishino – Stone Valve Cover Gasket (Part No.A8030289129ISH)

Stone Valve Cover Gasket

from

$18.76
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Ishino – Timing Cover Gasket (Part No.A8050325620ISH)

Timing Cover Gasket

from

$17.64
Timing Cover Gasket

Victor Reinz – Valve Cover Gasket: Direct Fit, 1 Piece (Part No.71-53996-00)

Valve Cover Gasket: Direct Fit, 1 Piece

from

$17.29
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds original equipment specifications.
  • Resistant to high and low temperatures and achieve a secure seal with low tightening forces.
See More

Ishino Stone – Timing Cover Gasket (Part No.A8050401935ISH)

Timing Cover Gasket

from

$16.53
Timing Cover Gasket

Ishino – Stone Valve Cover Gasket (Part No.A8030177565ISH)

Stone Valve Cover Gasket

from

$13.59
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Ishino – Timing Cover Gasket (Part No.A8050117641ISH)

Timing Cover Gasket

from

$12.48
Timing Cover Gasket

Ishino – Stone Valve Cover Gasket (Part No.A8030177566ISH)

Stone Valve Cover Gasket

from

$12.27
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Kibi Gaskets – Valve Cover Gasket (Part No.A8030289129KIB)

Valve Cover Gasket

from

$11.14
Valve Cover Gasket

Nippon Reinz – Exh. Man. to Pipe Ga (Part No.H4003117697NRZ)

Exh. Man. to Pipe Ga

from

$11.10
Exh. Man. to Pipe Ga

Elring – Valve Stem Seal (Part No.A8070180416ELR)

Valve Stem Seal

from

$6.85
Valve Stem Seal

Ishino – Oil Cooler Seal (Part No.A6310284445ISH)

Oil Cooler Seal

from

$6.59
Oil Cooler Seal

Ishino – Crankcase O-Ring (Part No.A1021142813ISH)

Crankcase O-Ring

from

$5.84
Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets. Do NOT confuse this o-ring for the 80691 9050, which is smaller & req. 3. This one only requires 1 per engine and is much larger than the 80691 9050. OD is 39 mm. This is also used between the crankcase halves.
See More

Felpro – Engine Oil Pressure Relief Valve Gasket (Part No.71405)

Engine Oil Pressure Relief Valve Gasket

from

$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Victor Reinz – Engine Oil Cooler Seal (Part No.71-11467-00)

Engine Oil Cooler Seal

from

$4.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Ishino Stone – VVT Oil Control Valv (Part No.A5407567666ISH)

VVT Oil Control Valv

from

$3.92
VVT Oil Control Valv

Nippon Reinz – Oil Pan Gasket (Part No.A6130302482NRZ)

Oil Pan Gasket

from

$3.54
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components. This engine does not use a gasket between the oil pan and the block, except for this o-ring located in the right rear corner of the oil pan. Use the appropriate liquid gasket sealant to seal the joint along the perimeter of the oil pan.
See More

Ishino – Valve Stem Seal, Intake (Part No.A8070180419ISH)

Valve Stem Seal, Intake

from

$3.31
Valve Stem Seal, Intake

Nippon Reinz – Victor Reinz Crankcase O-Ring (Part No.A1021247943NRZ)

Victor Reinz Crankcase O-Ring

from

$2.31
The most important types of dynamic seals are oil seals for use on rotating shafts, and valve stem seals for reducing the flow of oil through the cylinder-head into the combustion chamber. In addition to simple oil seals and integrated radial oil seals, VICTOR REINZ offers a new generation of PTFE radial oil seals. Modern engine concepts require solutions for dynamic seals, which are able to withstand the high loads lastingly. Thanks to outstanding properties, PTFE meets these demands – the best prerequisites for series use in modern engines.

Product Features:
  • OE Quality
  • PTFE technology
  • Withstands high loads
See More

Nippon Reinz – Timing Cover Gasket (Part No.A8050137282NRZ)

Timing Cover Gasket

from

$2.22
Nippon Reinz engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, Nippon Reinz offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components. Diamond Shaped Gasket
See More

Ishino Stone – Oil Pick-up Tube O-R (Part No.A6272342724ISH)

Oil Pick-up Tube O-R

from

$2.01
Oil Pick-up Tube O-R

Elring – SEAL RING (Part No.A8092118638ELR)

SEAL RING

from

$1.21
SEAL RING

Elring – SEAL RING – COPPER (Part No.4M20011240ELR)

SEAL RING - COPPER

from

$1.18
SEAL RING – COPPER

Most Popular 2008 Subaru Legacy Engine Mounts

Customize your Subaru with 8 Engine Mounts products like Engine Mounts, all priced under $140.46.

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9709)

Engine Mount: Front Right, 1 Piece

from

$84.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SUBA 05-14;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2014
  • Weight approx: 2 Lbs
  • PART GROUP: 9660, 9709
See More

Anchor – Engine Mount: Front Left, 1 Piece (Part No.9660)

Engine Mount: Front Left, 1 Piece

from

$70.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SUBA 05-14;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2014
  • Weight approx: 3 Lbs
  • PART GROUP: 9660, 9709
See More

Autopart International Inc – Engine Mount (Part No.A70001980193API)

Engine Mount

from

$140.46
Engine Mount

Autopart International Inc – Engine Mount (Part No.A70001903827API)

Engine Mount

from

$140.45
Engine Mount

DEA – DEA Engine Mount (Part No.A7000301904DEA)

DEA Engine Mount

from

$125.17
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:
  • USA Development and OEM laboratory – 14 OEM Engineers
  • Design Solutions and Installation Enhancements to Failing OEM designs
  • Complete Factory Testing and Vehicle Verification Resources
See More

DEA – DEA Engine Mount (Part No.A7000301907DEA)

DEA Engine Mount

from

$125.14
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:
  • USA Development and OEM laboratory – 14 OEM Engineers
  • Design Solutions and Installation Enhancements to Failing OEM designs
  • Complete Factory Testing and Vehicle Verification Resources
See More

Anchor – Engine Mount: Front Right, 1 Piece (Part No.10040)

Engine Mount: Front Right, 1 Piece

from

$96.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SUBA 05-14;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2014
  • Weight approx: 3 Lbs
See More

Anchor – Engine Mount: Front Left, 1 Piece (Part No.10039)

Engine Mount: Front Left, 1 Piece

from

$96.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SUBA 05-14;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2014
  • Weight approx: 3 Lbs
See More

Top Picks for 2008 Subaru Legacy Valve Cover and Cylinder Heads

Upgrade Subaru Legacies with top-quality Valve Cover and Cylinder Heads parts, including 27 OEM and aftermarket selections for your 2008 model.

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72905)

Engine Cylinder Head Bolt Set

from

$92.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26531 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
  • HANDLES EXTREME ENGINE CONDITIONS — Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26415 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72212)

CYLINDER HEAD BOLT SET

from

$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26415 PT-1)

Cylinder Head Gasket Set

from

$252.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
  • UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26531 PT-1)

Cylinder Head Gasket Set

from

$115.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Ishino Stone – Cylinder Head Gasket (Part No.A8100949274ISH)

Cylinder Head Gasket

from

$61.09
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72463)

CYLINDER HEAD BOLT SET

from

$85.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

MAHLE Original – Engine Cylinder Head Gasket Set (Part No.HS55016B)

Engine Cylinder Head Gasket Set

from

$373.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26536 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$54.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26534 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
See More

Spartan – Engine Cylinder Head; Subaru EJ25E 06-11 Rgt Head (Part No.2713GR)

Engine Cylinder Head; Subaru EJ25E 06-11 Rgt Head

from

$716.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Subaru EJ25D 06-10 LFT Head (Part No.2712GL)

Engine Cylinder Head; Subaru EJ25D 06-10 LFT Head

from

$638.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Subaru EJ25D 06-10 RGT Head (Part No.2712GR)

Engine Cylinder Head; Subaru EJ25D 06-10 RGT Head

from

$633.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Subaru EJ25E 06-09 LFT Head (Part No.2713JL)

Engine Cylinder Head; Subaru EJ25E 06-09 LFT Head

from

$628.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.01-11244-01)

Engine Cylinder Head Gasket Set

from

$427.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-10758-01)

Engine Cylinder Head Gasket Set

from

$310.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Various material and design technologies
  • Includes all components required to complete the repair
  • Dana engineering-approved for fit, form and function
See More

Ishino – Stone Cylinder Head Gasket Set (Part No.A8010341654ISH)

Stone Cylinder Head Gasket Set

from

$285.32
WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
  • Most gasket sets include components needed for a complete overhaul
See More

MAHLE Original – Engine Cylinder Head Gasket Set (Part No.HS54493C)

Engine Cylinder Head Gasket Set

from

$249.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Ishino – Stone Cylinder Head Gasket Set (Part No.A8010341652ISH)

Stone Cylinder Head Gasket Set

from

$218.49
WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
  • Most gasket sets include components needed for a complete overhaul
See More

Mahle – Cylinder Head Bolt (Part No.A3030376902MAH)

Cylinder Head Bolt

from

$97.96
Cylinder Head Bolt

Nippon Reinz – Nippon Reinz Cylinder Head Gasket (Part No.A8100180237NRZ)

Nippon Reinz Cylinder Head Gasket

from

$67.18
Nippon Reinz does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Nippon Reinz doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Nippon Reinz gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
See More

Nippon Reinz – Nippon Reinz Cylinder Head Gasket (Part No.A8100180236NRZ)

Nippon Reinz Cylinder Head Gasket

from

$67.01
Nippon Reinz does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Nippon Reinz doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Nippon Reinz gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
See More

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-11245-00)

Engine Cylinder Head Gasket

from

$58.99
For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-11244-00)

Engine Cylinder Head Gasket

from

$54.99
For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Nippon Reinz – Nippon Reinz Cylinder Head Gasket (Part No.A8100396655NRZ)

Nippon Reinz Cylinder Head Gasket

from

$47.59
Nippon Reinz does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Nippon Reinz doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Nippon Reinz gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
See More

MAHLE Original – Cylinder Head Gasket L/H (Part No.54656)

Cylinder Head Gasket L/H

from

$46.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Cylinder head gaskets are sold individually and may require new head bolts based on application.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

In-Demand Engine Timing Parts for 2008 Subaru Legacies

Select from 45 premium Engine Timing Parts parts for your 2008 Subaru Legacy, with prices ranging from $3.02 to $441.35.

Dorman – Variable Valve Timing Solenoid (Part No.917-246)

Variable Valve Timing Solenoid

from

$154.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Felpro – Engine Camshaft Seal Kit (Part No.TCS 46008)

Engine Camshaft Seal Kit

from

$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2292)

Engine Water Pump: New, Gasket/Seals Included

from

$114.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Dayco – Premium Timing Belt, 70.24 Inch With 223 Round Tooth (Part No.95307)

Premium Timing Belt, 70.24 Inch With 223 Round Tooth

from

$71.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:
  • Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
  • Offers noise reduction and minimum dimensional tolerances for precise valve timing
  • Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
  • Timing marks are applied on the belt for proper installation
See More

Dayco – Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 3 Idlers (Part No.WP307K1B)

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 3 Idlers

from

$293.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • Includes premium Dayco components and a tough, wear-resistant belt
See More

Dayco – Premium Timing Belt, 88.51 Inch With 281 Round Tooth (Part No.95328)

Premium Timing Belt, 88.51 Inch With 281 Round Tooth

from

$85.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:
  • Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
  • Offers noise reduction and minimum dimensional tolerances for precise valve timing
  • Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
  • Timing marks are applied on the belt for proper installation
See More

Dayco – Timing Component Kit; With Tensioner And 4 Camshaft Belt Idlers, 6 Piece Set (Part No.84104)

Timing Component Kit; With Tensioner And 4 Camshaft Belt Idlers, 6 Piece Set

from

$257.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:
  • Engineered for the majority of domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and a tough, wear-resistant belt
  • Meets or exceeds OE quality
See More

Dayco – Timing Belt Kit; With Belts, Camhaft Belt Tensioner And 3 Idlers, 6 Piece Set (Part No.95307K1)

Timing Belt Kit; With Belts, Camhaft Belt Tensioner And 3 Idlers, 6 Piece Set

from

$364.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and tough, wear-resistant belt
See More

Dayco – Timing Component Kit; With Tensioner And 3 Camshaft Belt Idlers, 5 Piece Set (Part No.84105)

Timing Component Kit; With Tensioner And 3 Camshaft Belt Idlers, 5 Piece Set

from

$256.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:
  • Engineered for the majority of domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and a tough, wear-resistant belt
  • Meets or exceeds OE quality
See More

Dayco – Timing Belt Kit; With Belts, Camhaft Belt Tensioner And 4 Idlers, 7 Piece Set (Part No.95328K1)

Timing Belt Kit; With Belts, Camhaft Belt Tensioner And 4 Idlers, 7 Piece Set

from

$362.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and tough, wear-resistant belt
See More

Dayco – Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 4 Idlers (Part No.WP328K1A)

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 4 Idlers

from

$374.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • Includes premium Dayco components and a tough, wear-resistant belt
See More

Dayco – Timing Camshaft Belt Tensioner; 1 Piece, Built To Outperform And Outlast OE (Part No.85065)

Timing Camshaft Belt Tensioner; 1 Piece, Built To Outperform And Outlast OE

from

$196.99
Dayco offers a complete line of single-and double-eccentric mechanical camshaft belt tensioners. These tensioners are optimized for each application and consider specific driving behavior to ensure a lifetime of smooth operation.

Product Features:
  • Designed to keep the timing belt tightly in place for optimum performance
  • Made from OE quality materials to ensure smooth operation
  • Works with the timing belt to enhance system durability
  • Prevents belt flapping
See More

Dorman – Variable Valve Timing Solenoid (Part No.917-247)

Variable Valve Timing Solenoid

from

$96.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1067)

Engine Variable Valve Timing (VVT) Solenoid

from

$104.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NTN – Timing Belt Tensioner Assembly (Part No.A5028230406NTN)

Timing Belt Tensioner Assembly

from

$115.28
The NTN Timing Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality sealed precision bearing assembly
  • OE specified pulley
  • Durable long life performance
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1113)

Engine Variable Valve Timing (VVT) Solenoid

from

$129.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mitsubishi – Mitsuboshi Timing Belt (Part No.A5000194189MBL)

Mitsuboshi Timing Belt

from

$94.65
The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • High-tensile strength Carbon Cord
  • Abrasion resistant
  • High elasticity, high hardness HNBR rubber
  • Increased durability
  • Reduced noise
  • Rubber construction for superior flexibility
  • Special low friction tooth fabric
See More

GMB – Timing Belt Idler (Part No.A5291131788GMB)

Timing Belt Idler

from

$49.86
GMB is one of the world’s largest designers and manufacturers of automotive service products. GMB offers OE quality water pumps, universal joints, tensioner idler bearings and chassis parts for most European, Asian and Domestic vehicles.
See More

NSK – Timing Belt Idler (Part No.A529197812NSK)

Timing Belt Idler

from

$23.71
Timing Belt Idler

Gates – Timing Belt Kit (Part No.A50061064433GAT)

Timing Belt Kit

from

$441.35
Timing Belt Kit

ContiTech – Premium Timing Belt Kit (Part No.A5006232846CON)

Premium Timing Belt Kit

from

$400.46
ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Low noise operation.
  • Resistant to high temperatures.
  • Durable long life performance.
See More

ContiTech – Premium Timing Belt Kit (Part No.A5006296885CON)

Premium Timing Belt Kit

from

$378.79
ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Low noise operation.
  • Resistant to high temperatures.
  • Durable long life performance.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1227)

Engine Variable Valve Timing (VVT) Sprocket

from

$252.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1242)

Engine Variable Valve Timing (VVT) Sprocket

from

$236.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:
  • Precision-wound coated copper windings increase product durability and life cycle.
  • Hard-coated and anodized spool valve to prevent corrosion and increase service life.
  • Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
  • Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure product reliability, every time.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1453)

Engine Variable Valve Timing (VVT) Sprocket

from

$236.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:
  • Precision-wound coated copper windings increase product durability and life cycle.
  • Hard-coated and anodized spool valve to prevent corrosion and increase service life.
  • Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
  • Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure product reliability, every time.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

NTK – EN VAR TIME SOLENOID (Part No.VV0042)

EN VAR TIME SOLENOID

from

$177.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

WSO – Camshaft Adjuster So (Part No.A5132565915WSO)

Camshaft Adjuster So

from

$151.97
Camshaft Adjuster So

NTK – EN VAR TIME SOLENOID (Part No.VV0044)

EN VAR TIME SOLENOID

from

$142.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

NTK – EN VAR TIME SOLENOID (Part No.VV0046)

EN VAR TIME SOLENOID

from

$126.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1574)

Engine Variable Valve Timing (VVT) Solenoid

from

$125.99
Engine Variable Valve Timing (VVT) Solenoid

WSO – Camshaft Adjuster So (Part No.A5132811061WSO)

Camshaft Adjuster So

from

$121.30
Camshaft Adjuster So

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1402)

Engine Variable Valve Timing (VVT) Sprocket

from

$112.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1229)

Engine Variable Valve Timing (VVT) Sprocket

from

$112.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

WSO – Camshaft Adjuster So (Part No.A5132568054WSO)

Camshaft Adjuster So

from

$105.60
Camshaft Adjuster So

Mitsubishi – Mitsuboshi Timing Belt (Part No.A5000111734MBL)

Mitsuboshi Timing Belt

from

$64.73
The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • High-tensile strength Carbon Cord
  • Abrasion resistant
  • High elasticity, high hardness HNBR rubber
  • Increased durability
  • Reduced noise
  • Rubber construction for superior flexibility
  • Special low friction tooth fabric
See More

NTN Bearing Corporation – Timing Belt Idler (Part No.A5291281434NTN)

Timing Belt Idler

from

$55.59
Timing Belt Idler

Original Equipment – Timing Guide Rail (Part No.A5040164922OEA)

Timing Guide Rail

from

$44.49
Timing Guide Rail

NSK – Timing Belt Idler, Double Roller (Part No.A5291143770NSK)

Timing Belt Idler, Double Roller

from

$44.05
Timing Belt Idler, Double Roller

Koyo – Timing Belt Idler, Double Style Bearing (Part No.A529132588KOY)

Timing Belt Idler, Double Style Bearing

from

$42.70
Koyo Seiko Co., Ltd. (JTECT Corporation) designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. When replacing an earlier design idler on some older engines with this later design bearing, a different length retaining bolt may be required.
See More

Dorman – Timing Cover Bolt Kit (Part No.926-386)

Timing Cover Bolt Kit

from

$27.49
This engine timing cover bolt set is designed to match the fit and function of the factory bolt set on specified vehicles. The bolts are engineered to help secure the timing cover and replace rusted or missing factory bolts..

Product Features:
  • Direct replacement – the bolts in this engine timing cover bolt set are designed to match the fit and function of the factory bolts on specified vehicle makes, years and models.
  • Ideal solution – engineered to help secure the timing cover to the engine block or cylinder head and replace rusted or missing factory bolts
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Original Equipment – Timing Guide Rail (Part No.A5040164924OEA)

Timing Guide Rail

from

$21.91
Timing Guide Rail

Original Equipment – Timing Guide Rail (Part No.A5040164921OEA)

Timing Guide Rail

from

$16.66
Timing Guide Rail

FAG US – GENERAL SEAL (Part No.SS2376)

GENERAL SEAL

from

$14.29
GENERAL SEAL

MAHLE Original – Engine Timing Cover Dust Seal Set (Part No.67823)

Engine Timing Cover Dust Seal Set

from

$5.29
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Ishino – Timing Cover Grommet (Part No.A5070117634ISH)

Timing Cover Grommet

from

$3.02
Timing Cover Grommet

Most Sold 2008 Subaru Legacy Camshafts

Explore our best-selling Subaru parts for the 2008 Legacy among 26 OEM and aftermarket options starting from $3.29.

National – Multi Purpose Seal (Part No.223801)

Multi Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1186)

Camshaft Sensor

from

$53.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Felpro – CIRCULAR PLUG (Part No.ES 72418)

CIRCULAR PLUG

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1476)

Engine Camshaft Position Sensor

from

$74.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1382)

Camshaft Sensor

from

$92.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

MAHLE Original – Camshaft Seal (Part No.67807)

Camshaft Seal

from

$5.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

National – Shaft Repair Sleeve (Part No.99196)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Felpro – Engine Camshaft Seal Kit (Part No.TCS 46140)

Engine Camshaft Seal Kit

from

$19.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Camshaft Position Sensor (Part No.907-847)

Camshaft Position Sensor

from

$53.99
Engine Camshaft Position Sensors are used by the engine control module to synchronize the pulsing of sequential fuel injectors so they match the firing order of the engine. Dorman Engine Crankshaft Position Sensors have undergone extensive vehicle try-on and durability testing to ensure strength, fitment and longevity.

Product Features:
  • Sensor electronics sealed to resist fluid damage and corrosion.
  • Durable plastic construction.
  • Manufactured to strict engineering quality standards
  • No special tools required
See More

Driveworks – Oil Seal (Part No.S-223801)

Oil Seal

from

$4.99
Product Features:
  • Brand may vary by location
See More

Mitsubishi Electric Automotive – Camshaft Position Sensor (Part No.A4015173501MEA)

Camshaft Position Sensor

from

$73.98
Camshaft Position Sensor

National – Shaft Repair Sleeve (Part No.99114)

Shaft Repair Sleeve

from

$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS10037)

Engine Camshaft Position Sensor

from

$127.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

Dorman – Camshaft Position Sensor (Part No.907-846)

Camshaft Position Sensor

from

$87.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS11374)

Engine Camshaft Position Sensor

from

$76.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

SKF – Crankshaft Seal (Part No.A8060663432SKF)

Crankshaft Seal

from

$15.94
Crankshaft Seal

WSO – Camshaft Position Se (Part No.A4015173521WSO)

Camshaft Position Se

from

$85.01
Camshaft Position Se

#N/A – Camshaft Position Se (Part No.A4015401242WKR)

Camshaft Position Se

from

$47.17
Camshaft Position Se

Dorman – CAMSHAFT SENSOR (Part No.962-123)

CAMSHAFT SENSOR

from

$31.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Mahle – Camshaft Seal (Part No.A8080102364MAH)

Camshaft Seal

from

$12.27
Camshaft Seal

FAG US – GENERAL SEAL (Part No.SS2343)

GENERAL SEAL

from

$11.29
GENERAL SEAL

NOK – Camshaft Seal, OEM (Part No.A8080102364NOK)

Camshaft Seal, OEM

from

$8.61
Camshaft Seal, OEM

Beck/Arnley – Seal Camshaft (Part No.052-4050)

Seal Camshaft

from

$7.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber designed to keep water and dirt out
  • Quality construction for durability
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

NOK – Camshaft Seal (Part No.A8080161055NOK)

Camshaft Seal

from

$7.73
Camshaft Seal

NOK – Camshaft Seal (Part No.A8080117780NOK)

Camshaft Seal

from

$6.57
Camshaft Seal

Driveworks – Oil Seal (Part No.S-223230)

Oil Seal

from

$3.29
Product Features:
  • Brand may vary by location
See More

Top-Rated Engine Parts Brands For Your 2008 Subaru Legacy

Shop for the best-rated brands offering Engine Parts and other products for your 2008 Subaru Legacies. Below you’ll find some of our best rated Engine Parts from FELPRO, Dayco, and Carquest Premium, and more. Engine Parts from these brands that fit a 2008 Legacy start at just $5.49 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2008 Subaru Legacy Engine Parts

When it comes to maintaining or upgrading your 2008 Subaru Legacy, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2008 Subaru Legacy. With over 31 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.49, with an average price of just $64.45. Plus, with over 93 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Valve Stem Oil Seal Set
from
$27.49
This product is not rated

Engine Valve Stem Oil Seal Set

“”

CIRCULAR PLUG
from
$7.79
This product is not rated

CIRCULAR PLUG

“”

Turbocharger Mounting Gasket Set
from
$42.99
This product is not rated

Turbocharger Mounting Gasket Set

“”

Popular Dayco 2008 Subaru Legacy Engine Parts

Dayco auto parts is one of the highest quality Engine Part brands in the market. Any 2008 Subaru Legacy owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2008 Legacy, Advance Auto Parts carries a full inventory of 9 Dayco Engine Parts. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Dayco Engine Parts range from $71.99 to $374.99, plus, with more than 21 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Premium Timing Belt, 70.24 Inch With 223 Round Tooth
from
$71.99

(9)

Premium Timing Belt, 70.24 Inch With 223 Round Tooth

“Work great”

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 4 Idlers
from
$374.99
This product is not rated

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 4 Idlers

“”

FAQs for 2008 Subaru Legacy Engine Parts

Which Engine Parts are best-sellers for 2008 Subaru Legacies?

Out of 217 Engine Parts that fit 2008 Subaru Legacies, the following parts are the top sellers:

What’s the price range for 2008 Subaru Legacy Engine Parts?

Engine Part prices for the 2008 Subaru Legacy start at $1.07 and go up to $5,843.99 for the most premium parts.

What’s the average price of a Engine Part for a 2008 Subaru Legacy?

The average price for Engine Parts for the 2008 Subaru Legacy is $129.78. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Subaru Legacy model years?

Yes, we currently carry Engine Parts for 34 model years of Subaru Legacies between 1990 and 2024. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 2008 Subaru Legacy?

The cheapest 2008 Subaru Legacy Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2008 Subaru Legacy?

Out of 734 reviews by customers, our 2008 Subaru Legacy Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2008 Subaru Legacy and their top-rated products:

What types of Engine Parts do you sell for my 2008 Subaru Legacy?

Can I get help with 2008 Subaru Legacy Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Engine Parts and more.

What is your return policy for Subaru Legacy Engine Parts?

Advance Auto Parts keeps returns simple. For new Subaru Legacy Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.