2008 Subaru Impreza Vehicle Hoods
More 2008 Subaru Impreza Vehicle Hoods
Find your specific 2008 Subaru Impreza original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2008 Subaru Impreza Vehicle Hoods
Dorman – Push-Type Fender – Bumper And Grille Retainer – 10 mm Hole (Part No.963-126D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
StrongArm – Tailgate Lift Support: 22.11" Ext Length, 8.25" Travel, 91 Lbs of Force, 1 Pk (Part No.C6215)
from
$42.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Lesjofors – Hatch Strut (Part No.O20701515296LES)
from
$52.43
Lesjofors produce a comprehensive range of OE matching quality gas springs. The tubes are manufactured from pressure vessel steel with very high demands on inside surface smoothness. Piston rods are manufactured from finely ground and polished steel bars. The rod surface is either chrome plated or nitro-carburized to ensure high hardness, highest corrosion resistance and best possible wear resistance. Rod guides and gaskets are made from special, wear resistant materials. After assembly, the spring cylinders are painted with a paint containing corrosion inhibitors for high resistance against corrosion. The gas spring is then filled with Nitrogen gas using a technique which assures high pressure accuracy. The springs are load, deflection and speed tested before delivery and each spring is marked with an identification and part number.
Product Features:
See More
Product Features:
- Spring Design – Gas spring design is an exact science, utilizing precise mixtures of highly pressurized nitrogen gas to achieve the desired force. More complex than many realize.
- Manufacturing – Intricate moving parts powered by high pressured gas requires technologically advanced manufacturing methods.
- Quality – Lesjofors gas springs are of the highest quality but do have a finite lifespan. Learn how to get the most out of your gas springs.
Lesjofors – Hatch Strut (Part No.O20701515297LES)
from
$53.04
Lesjofors produce a comprehensive range of OE matching quality gas springs. The tubes are manufactured from pressure vessel steel with very high demands on inside surface smoothness. Piston rods are manufactured from finely ground and polished steel bars. The rod surface is either chrome plated or nitro-carburized to ensure high hardness, highest corrosion resistance and best possible wear resistance. Rod guides and gaskets are made from special, wear resistant materials. After assembly, the spring cylinders are painted with a paint containing corrosion inhibitors for high resistance against corrosion. The gas spring is then filled with Nitrogen gas using a technique which assures high pressure accuracy. The springs are load, deflection and speed tested before delivery and each spring is marked with an identification and part number.
Product Features:
See More
Product Features:
- Spring Design – Gas spring design is an exact science, utilizing precise mixtures of highly pressurized nitrogen gas to achieve the desired force. More complex than many realize.
- Manufacturing – Intricate moving parts powered by high pressured gas requires technologically advanced manufacturing methods.
- Quality – Lesjofors gas springs are of the highest quality but do have a finite lifespan. Learn how to get the most out of your gas springs.
Atlas Lift – Lift Support (Part No.LS10843)
from
$26.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Popular 2008 Subaru Impreza Vehicle Hoods Categories
2008 Subaru Impreza Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 2008 Subaru Impreza. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 3 different Vehicle Hoods in our inventory ranging from $4.49 to $53.04. That means you can find the exact parts or products you need to keep that 2008 Subaru Impreza running smoothly.
Vehicle Hoods are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Subaru Impreza. Lesjofors and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 2008 Subaru Impreza, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 2008 Subaru Impreza rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 2008 Subaru Impreza Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Subaru Impreza demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Impreza the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
FAQs for 2008 Subaru Impreza Vehicle Hoods
What are the most purchased Vehicle Hoods for the 2008 Subaru Impreza?
Out of 3 Vehicle Hoods for the 2008 Subaru Impreza, the most popular in our inventory are:
from
$4.49
This product is not rated
Push-Type Fender – Bumper And Grille Retainer – 10 mm Hole
Hood, Trunk, and Bumper Retainers
